***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Footwell lights

HID's, Bulb's + LED Interior and Exterior Illumination.

Moderators: Moderators, Senior Moderators

satyamsam
Lancer Learner
Lancer Learner
Posts: 6
Joined: Sat Jul 04, 2015 7:17 pm
Location: Adelaide, Australia

Footwell lights

Postby satyamsam » Sun Jul 05, 2015 10:11 pm

Hey guys I know there are already some posts on here for this but I think my question is still relevant.
So I have read two different options to wire up the foot well lights using the cabin light.
1. Wire Led using the yellow and red wire for the cabin lights red for power and yellow for ground
2. Take power from the cabin light fuse and use chassis for ground
I know that 1 would work for sure but it requires tapping into those wires, but the question is will option 2 provide the same functionality as 1?

Thanks in advance
-----------------------------
Owner of 2013 lancer VRX

ImageImage

User avatar
Shaun Patterson
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 381
Joined: Fri Sep 05, 2014 9:59 pm
Location: Rockhampton Australia

Postby Shaun Patterson » Mon Jul 06, 2015 12:29 am

yeah same result, any constant 12v would be fine so long as the wire can support the load

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Mon Jul 06, 2015 7:48 am

I really want to do this, I know Mitshi has the parts but what other LEDs do others use?

BTW nice looking CJ there with the black on silver.
Image
My rides CJ VRX - CC coupe

User avatar
Jason-VR
Lancer ES/EX
Lancer ES/EX
Posts: 165
Joined: Fri Feb 15, 2013 5:48 am
Location: adelaide,SA

Postby Jason-VR » Mon Jul 06, 2015 9:03 am

Option 2 won't turn off because the power for the interior lights is on all the time. The interior lights are controlled on and off through the earth. Option 2 will work if you earth through a switch so you can turn them on and off.

satyamsam
Lancer Learner
Lancer Learner
Posts: 6
Joined: Sat Jul 04, 2015 7:17 pm
Location: Adelaide, Australia

Postby satyamsam » Mon Jul 06, 2015 9:27 am

Thanks Jason I thought that might have been the case!

And Craig I plan on using Waterproof 5050RGB LED strip with RF controller from eBay. I'll also be installing custom ghost shadow door lights hopefully I can get power and ground wire thru the door grommets. While the door housing is off and if I can run LED wires to the door I'll be adding RGB LEDs to the door as well something I saw on friends Merc, but his was factory install.

And last but not least plan is to do underglow for when the doors are open and when car is unlocked same as the ghost lights
-----------------------------

Owner of 2013 lancer VRX



ImageImage


Return to “Lighting”

Who is online

Users browsing this forum: No registered users and 6 guests