***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

DIY Rally Mud Flaps?

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

DIY Rally Mud Flaps?

Postby Lancer1993 » Wed Feb 18, 2015 12:19 pm

I want to do some mud flaps for my VRX.

Yes I know most here usually remove them but I'm not most people.

Now I know you can get some proper Ralliart ones on eBay but first they are expensive for a few bits of plastic and two I don't want 'Ralliart' on my non RA Lancer.

I know you can buy the proper mud flap type material much cheaper and was hoping someone had a pattern I could print out and then transfer to cut them out and have the holes in the proper place, make up some reinforcing brackets. Also I could make them a bit shorter for when the car is lowered.

Barring that does anyone know a shop/site that sells them without badging in any color you want?

Can you guess the color I'm interested in? LOL
Image
My rides CJ VRX - CC coupe

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Wed Feb 18, 2015 1:51 pm

I am guessing yellow i am guessing you are a Richmond Tigers Supporter :-)
Last edited by Mitch on Wed Feb 18, 2015 1:58 pm, edited 1 time in total.

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Wed Feb 18, 2015 1:55 pm

i never had mudflaps to remove Craig, preety sure no one has
210 KWATW 400nm RALLIART Virtual Dyno 1/1
http://goo.gl/GrUosm


Image

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Wed Feb 18, 2015 2:42 pm

Don't know if I've still got my template, but https://www.rallyarmor.com is where I copied the fronts for. And why is this in the electrical section? you putting leds on them??
Image

[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Wed Feb 18, 2015 3:29 pm

Sorry didn't realize I posted in the wrong section, thought I'd selected exterior.

Can some one move this thread?

Wait, LEDs on the rear flaps, maybe you're on to something.

Yes I know the CJ never came with flaps but I meant in general one of the first mods most do is to ditch them. But my Coupe has always has them and I added some flat generic ones with 'Mitsubishi' on them (many years ago) on the front when I got the side skirt so the stock ones would not fit any more.

They do help keep some crap off the sides of the car.

I checked out the rallyarmor.com site but they don't have any in yellow. :)
Image
My rides CJ VRX - CC coupe

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Wed Feb 18, 2015 3:34 pm

http://clubcj.net/viewtopic.php?t=784&p ... e&start=90

you can see the mud flaps I installed
Image



[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Wed Feb 18, 2015 8:52 pm

Thanks, but I need details.

Might have to get these of eBay, but it's still over $100 plus I'd need to cut them to shape.

The government goes on about buying local but I've lost count of the number of times I've had to turn to eBay because no where local has what I want when it comes to car parts or they cost many times more that the same thing on eBay from China.

Surely someone on the Sunshine coast has the 4mm (yellow) PVC type plastic I'm after.

Still need a pattern or a guide as to which holes to use so I can make up some cardboard ones that work.
Image
My rides CJ VRX - CC coupe

User avatar
r00tc4u53
Lancer ES/EX
Lancer ES/EX
Posts: 148
Joined: Tue May 20, 2014 5:46 pm
Location: Sunshine Coast

Postby r00tc4u53 » Wed Feb 18, 2015 8:56 pm

Make your own template, not hard, use cardboard and a pen\pencil or something similar that will leave a mark on the cardboard. Try clark rubber, there's one in Kawana

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Wed Feb 18, 2015 9:25 pm

Clark Rubber has well rubber and no PVC plastics, called them today. Along with a few other places. Been checking online and might try a few other places tomorrow.

Looks like the cheapest will be around $100 on eBay.
Image
My rides CJ VRX - CC coupe

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Postby lancerdarryl » Thu Feb 19, 2015 1:44 am

how about these? I think I have a template for them.I'll check and let you know.Image
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Thu Feb 19, 2015 6:40 am

Do they come in yellow :)
Image
My rides CJ VRX - CC coupe

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Postby lancerdarryl » Thu Feb 19, 2015 7:15 am

Not sure,have a look on their website.They do two versions,the heavy urethane type shown in the picture and a lighter thinner plastic type.I had the urethane type on my old Ralliart and have a set of the plastic type on my Wife's VRX. They are a perfect fit.Ive had a look for the template I thought I had but it was one I had made for the Evo mudflaps.
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR

"Don't back off until you hit something"

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Thu Feb 19, 2015 8:23 am

I might end up just buying ones made for the CJ if I can't get the raw material at a good price.

I just found these LED flaps LOL
http://www.autoanything.com/lights/69A4801A0A0.aspx
Image
Image
My rides CJ VRX - CC coupe

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Thu Feb 19, 2015 1:54 pm

Finally found a local plastics place that can supply them in yellow, 4 sheets at 30x50cm but they only can get it at 6mm thick, $88.

Would this be too think?

Most I've seen on eBay are 3-4mm.
Image
My rides CJ VRX - CC coupe

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Thu Feb 19, 2015 1:59 pm

wont flex as much which would be better
Image



[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 21 guests