***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

DIY Rally Mud Flaps?

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Thu Feb 19, 2015 4:16 pm

As long a it bends enough for the guard shape.

I was thinking 3mm might be a bit thin.

I might get the 6mm, just need suitable bolts, probably something stainless and a pattern to make them.

Maybe a strip of LEDs for the bottom edge LOL
Image
My rides CJ VRX - CC coupe

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Sun Feb 22, 2015 10:36 am

Um dumb question but I was working under the assumption I'd need 4x 50x30cm sheets but just checked and each flap doesn't need to be any bigger than 25x30. So you can get 2 flaps from one of the sheets sold on eBay, halving the materials cost.

How big are the Rallyarmor ones?

Still not found a design to cut them out... wish Rallyarmor made them in yellow :)
Image
My rides CJ VRX - CC coupe

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Tue Feb 24, 2015 2:53 pm

UPDATE - I've found a local place that can supply the PVC material and can cut it to shape at a good price, just need a pattern their computer can use to do the cutting.

I have seen some pictures online but without dimensions they are useless.

Please does anyone have a PDF design of the flaps?
Image
My rides CJ VRX - CC coupe

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Tue Feb 24, 2015 3:21 pm

I get home on Sunday if you can wait I'll look then
Image

[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Tue Feb 24, 2015 5:38 pm

That would be great, I'm in no hurry to get this done. Rather do it right the first time.

The plastics place can also engrave anything I want on them. Depending on cost I might do it.

I am amazed there isn't more places that specialize in custom mud flaps where you get to choose the logo or writing you want on them. I know the likes of Rallyarmor have a range for different car but they are limited and don't come in anything but black or red. What about white, blue, yellow or even green or pink to suit what the owners want?
Image
My rides CJ VRX - CC coupe

User avatar
r00tc4u53
Lancer ES/EX
Lancer ES/EX
Posts: 148
Joined: Tue May 20, 2014 5:46 pm
Location: Sunshine Coast

Postby r00tc4u53 » Tue Feb 24, 2015 9:38 pm

Lancer1993 wrote: I am amazed there isnt more places that specialize in custom mud flaps


Probably because modern cars these days aren't designed to have mud flaps with the lines and curves they have and all, and plus TBH, mudflaps on cars are butt ugly, reminds me of a truck or fourbie...

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Tue Feb 24, 2015 9:49 pm

Well I want my CJ to be different, could done the easy thing an pay $50 for the factory front ones and been done with it. Besides if I get tired of them I'll take them off.

Thing is being custom you can choose how big they are, if the stick out to protect the side of the car and how far they drop to the ground, I'm thinking maybe 75mm clearance to the ground at the most :)
Image
My rides CJ VRX - CC coupe

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Mon Mar 02, 2015 2:24 pm

Speedie wrote:I get home on Sunday if you can wait Ill look then

How'd it go?
Image
My rides CJ VRX - CC coupe

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Mon Mar 02, 2015 6:57 pm

I have the scans of them. Will convert to a PDF so you can print them in A4. PM me your email
Image



[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Mon Mar 02, 2015 7:13 pm

Thanks for that, just sent a PM
Image
My rides CJ VRX - CC coupe

User avatar
Sammy
Lancer Newbie
Lancer Newbie
Posts: 86
Joined: Sat Jan 04, 2014 9:13 am
Location: Melbourne

Postby Sammy » Mon Mar 02, 2015 11:17 pm

Speedie wrote:I have the scans of them. Will convert to a PDF so you can print them in A4. PM me your email


also sent you a PM man, would love to grab a copy of those scans
Image
2010 2.4L lancer aspire

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Tue Mar 03, 2015 6:52 am

Yes its a scan of the rally armour flaps. Happy to send to anyone else
Image



[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Wed Mar 04, 2015 11:53 am

Can you let us know when its sent, in case it gets put into the junk mail folder.
Image
My rides CJ VRX - CC coupe

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Sat Mar 07, 2015 7:01 pm

First can a mod please move this thread to the exterior section?

Got the PDF and working on some designs, not sure if I want then to engrave them or not?

I was thinking maybe VRX? I'd need to paint in the black.
Image

Or maybe this on the front ones?
Image
I have no idea how they do the engraving or how deep, Maybe I can get some black plastic melted into the?

Anyone tried anything light this before?

I'll be seeing them next week.

This is the kind of mod I like, doing something different and from scratch, not just buying something and bolting it on.
Image
My rides CJ VRX - CC coupe

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Sun Mar 08, 2015 1:17 am

Stickers work fine on PVC
Image



[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 12 guests