***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

LANCER PAINT CODES

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sat Oct 31, 2009 11:13 pm

Post some pics of yours, as it doesn't sound like any Aspire I've seen lol

Not saying you're wrong, just interesting how it is painted!

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sat Oct 31, 2009 11:17 pm

SIR-VRX wrote:Post some pics of yours, as it doesn't sound like any Aspire I've seen lol

Not saying you're wrong, just interesting how it is painted!

How do I do that, sorry I have tried
[/url]

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sat Oct 31, 2009 11:27 pm

If you upload an image to Photobucket (or ClubCJ image hosting) you get the URL of the image and ut it between the tags [img]and[/img] so it would look like this:

Code: Select all

[IMG]http://i290.photobucket.com/albums/ll259/cyruschrono/RA.gif[/IMG]


Turns into

Image

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sat Oct 31, 2009 11:48 pm

Image
Shit, I did it. :o
The 2 centre grills are original. Fog lamp surrounds I have changed
Last edited by aspir3 on Sun Apr 17, 2011 11:27 am, edited 1 time in total.

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sat Oct 31, 2009 11:51 pm

Ok, so are you saying that the inner grille (mesh part) is the same colour as the car, or similar to it?

I can see the outer (surround) is chrome, as are your foggies now.

But I thought the inner grille mesh was silver/chrome colour also :S

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sun Nov 01, 2009 12:02 am

SIR-VRX wrote:Ok, so are you saying that the inner grille (mesh part) is the same colour as the car, or similar to it?

I can see the outer (surround) is chrome, as are your foggies now.

But I thought the inner grille mesh was silver/chrome colour also :S


It is hard to see, but if you look at the bottom grill on the drivers side where it is solid it looks more silver then the body. It is different to S18

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sun Nov 01, 2009 12:06 am

That is probably because the grille isn't meant to be body colour. It is meant to be a silver/chrome grille. So there would be no paint code for that.

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sun Nov 01, 2009 12:20 am

Yes you are right, but it must have a code. All original paint have a code. The identification plate have only the body colour code on them. Mitsubishi should know the colour of the grill but they could not tell me. I was hoping someone experienced the same problem but found the answer

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sun Nov 01, 2009 12:23 am

It is made in the factory, the plastic is that colour. It is not just painted on... Not from what I can tell anyway... Even so, a good paint shop can match it up, they have those scanning things now they use to get it perfect

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sun Nov 01, 2009 12:30 am

You are right again. I did not think of coloured plastic. I should know too used to work as a plastics toolmaker supplying car parts. I have not seen coloured plastic on car components. I will check it out in the morning.
We did colour match the fog lamp surrounds as you can see, but would have been easier and more accurate with a code.

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sun Nov 01, 2009 12:33 am

I'm always right :P

But I am intrigued, I'm fairly sure it is coloured in the plastic.

You supplied parts to which manufacturer?

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sun Nov 01, 2009 12:40 am

SIR-VRX wrote:I'm always right :P

But I am intrigued, I'm fairly sure it is coloured in the plastic.

You supplied parts to which manufacturer?

I use to work for Exacto plastics 98-03. They recently just closed, went bankrupt :D
They supplied parts to Holdens, Mitsubishi, and Fords

Mez
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 317
Joined: Sat Oct 03, 2009 12:13 am
Location: Perth

Postby Mez » Tue Dec 01, 2009 5:25 am

which one is the plain black you get out of the 8 choices or whatever
for a vr lancer ?

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Tue Dec 01, 2009 6:33 am

X42 I believe

User avatar
86MIM
Lancer Evolution
Lancer Evolution
Posts: 933
Joined: Mon Nov 23, 2009 3:28 pm
Location: Brisbane, Australia

Postby 86MIM » Tue Dec 22, 2009 10:45 am

SIR-VRX wrote:X42 I believe



This be the same for the ES?

All I know is it's still black LOL...
kii

tykkään kiiltävä, nopeasti ja se on saanut olla ähkyä.
_________________
ClubCJ Lifetime Member #86


Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 58 guests