***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

*CLOSED* Custom Username Scuff Plates Pre-Order

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Fri Aug 28, 2009 9:58 pm

So its like...Melted rubbery plastic stuff yeah? And it gets poured into the groves?
Got a question? Read the ClubCJ Ultimate Guide First!!
Image
Just...Dont worry about it ;)Dont Click Me

User avatar
JazzyB
Lancer Ralliart
Lancer Ralliart
Posts: 731
Joined: Thu Feb 12, 2009 2:42 pm
Location: Melbourne, VIC, Australia

Postby JazzyB » Fri Aug 28, 2009 10:00 pm

yeah - I was thinking enamel too - just an alternative type of paint really right guys? kinda resiny?

cut right through and stuff like that is an option for custom ones - for a ballpark figure, we make badges for boats which are engraved simillarly, they are $50 and around the size of a rear scuff plate... Our design will hopefully be a little simpler since the badges have a kinda multi-layered edge which takes a while to make etc. but yes, those prices are just a little hopeful I think tadz - see what's involved, different fonts could mean a doubling in price depending on how small the tools are that we'll have to use (smaller tools take longer to cut, more intricate text/designs can take 2-3 times as long as a thick bold lettering)

I'm hoping to get the front two for less than the OEM ones - don't want them to be shabby tho - so... just let me see - not working tomorrow so I might go in and work on these ;-)

Thanks for the interest folks - I'll keep u posted!

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Fri Aug 28, 2009 10:03 pm

Would enamel be more durable then paint?
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Fri Aug 28, 2009 10:04 pm

enamel is hard and glossy Tadz very wear resistant
Image

[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Fri Aug 28, 2009 10:09 pm

Enamel should be better then. I think i made enamel for one of my projects for my metal work class. Isnt it some sort of resin with colour die in it?

How much does it cost to make? Any ideas?
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Fri Aug 28, 2009 10:19 pm

I'll ask my friend for prices and colours, then JazzyB can compare to his
Image



[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Fri Aug 28, 2009 10:21 pm

Sweet, thanks for that speedie!
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me

bd-850
Alumni
Alumni
Posts: 4486
Joined: Sat Apr 25, 2009 6:37 pm

Postby bd-850 » Fri Aug 28, 2009 10:42 pm

i have an idea in my head already, so yeah will see after a few more details

User avatar
JazzyB
Lancer Ralliart
Lancer Ralliart
Posts: 731
Joined: Thu Feb 12, 2009 2:42 pm
Location: Melbourne, VIC, Australia

Postby JazzyB » Sat Aug 29, 2009 1:09 pm

Image

Image

What do we think peoples?
I didn't do any physical work on them today- but figured out a quicker way of getting the text to work for me ;-) bit by bit - but the clubCJ ones! hot 'ay? considering they're custom an should be same price as mass-produced ones ;-)

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Sat Aug 29, 2009 1:34 pm

DANNNGGGGG!!! Those things are pure sex!! Double EOI from me mate!!!

How hard would it be to put 'The CJ Lancer Club' under it, kinda like the logo we got at the top right?
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me

User avatar
Scott_VRX_Fan
Lancer VR/GT
Lancer VR/GT
Posts: 212
Joined: Sat Apr 18, 2009 5:35 pm
Location: Cranbourne, VIC, Australia

Postby Scott_VRX_Fan » Sat Aug 29, 2009 1:36 pm

nice work, they looks great.

im not sure about the personal ones myself, but would be very interested in the clubcj ones.

they look quality
Mods Completed
ANZ Tazer 18" Wheels, Rear LED Tailights, GReddy Spectrum Elite Exhaust, Eibach Pro Kit Suspension 1.2" Front 0.8" Rear

Mods To Be Completed
Front Bumper Upgrade

Mods in Development
Brembo Brakes, Rear Wing, Bonnet, Inbuilt Sat Nav

User avatar
JazzyB
Lancer Ralliart
Lancer Ralliart
Posts: 731
Joined: Thu Feb 12, 2009 2:42 pm
Location: Melbourne, VIC, Australia

Postby JazzyB » Sat Aug 29, 2009 2:06 pm

yeah :-) really hope it all works well - I'm thinking that "the cj lancer club" text might be a bit small for my machine tadz... it can only run tools down to a certain size efficiently... but I'm pushing to upgrade the spindle of the machine a little (to a 32-40K RPM spindle :-D :-D) Basically, the engraving process should take half as long and hopefully will be able to run even finer text etc...

But, at this stage I have limitations... Thick is ok, medium is a maybe... really skinny I just can't do...

gonna talk to the boss man bout these upgrades tomorrow... since it's in the company's interest as well as ours - lol ;-)

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Sat Aug 29, 2009 2:12 pm

I guess the font that i put my one in in my initial designs would be a bit small for your machine then ay jazzy?

Edit: Ive just updated the first post with the clubCJ scuff plate renderings
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me

bd-850
Alumni
Alumni
Posts: 4486
Joined: Sat Apr 25, 2009 6:37 pm

Postby bd-850 » Sat Aug 29, 2009 3:17 pm

Awsome, do you think we could have a blank template, (for those non photoshop nerds, i.e me)

User avatar
Stalker
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 352
Joined: Wed Apr 15, 2009 2:20 am
Location: Sunshine Coast, QLD, Australia
Contact:

Postby Stalker » Sat Aug 29, 2009 3:26 pm

hmm, i wouldnt mind some for the right price
Image


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 19 guests