***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

tow bar for lancer CJ or Ralliart

Exterior Parts/Accessories & Modifications.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
black_ice
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 365
Joined: Sun Feb 24, 2013 4:13 pm
Location: NSW

Postby black_ice » Tue Feb 18, 2014 2:51 pm

Until Andrew mentioned it I did not think they would have different part number..for eg if you needed a new TCU i can understand why the part numbers would be different but for other mechanical stuff (clutch packs) shouldnt it be the same?
Saying a car is for going form A to B is like saying sex is for reproduction!
User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Postby R4LLI4RT » Tue Feb 18, 2014 3:03 pm

i would say so.
i always thought just the software would be different
hence why you can make a ra have s-sport
3Inch Custom Cat Back Exhaust
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster) ;-)
User avatar
zedd82
Lancer Evolution
Lancer Evolution
Posts: 892
Joined: Tue May 12, 2009 11:13 am
Location: Brisbane, QLD, Australia

Postby zedd82 » Tue Feb 18, 2014 4:41 pm

Well Mitsubishi don't sell just the gears etc. to go in them, they only sell them as a whole unit except the clutches, so they would have to be different part numbers if you think about it to distinguish between the RA and Evo boxes.

Pretty simple really.
Club CJ's fastest and most powerful Ralliart 349.8kw/ 469hp atw 12.068s 187km/h
User avatar
gman90
Lancer VR/GT
Lancer VR/GT
Posts: 208
Joined: Fri Mar 04, 2011 9:03 pm

Postby gman90 » Tue Feb 18, 2014 5:46 pm

Well I am confused they must be the same box surely and different software ????????
Evolution X MR 712 GTP Turbo Upgrade. Pedders Sports Extrema Coil Overs, DBA 5000 Premium 2 piece Brake Rotors Front and Rear Rotors ,OME Black- Out Rear Taillights (Ralliart) Red Floor Illumination. White Line Centre Roll Adjust Kit.
Ecutek Custom Tune. 3in TurboXS. Turbo Back Exhaust.
User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Postby R4LLI4RT » Tue Feb 18, 2014 6:03 pm

what are the part numbers id like to compare?
3Inch Custom Cat Back Exhaust

Home Brand Alloy UICP

DBA Slotted and Drilled Rotors

K&N Panel Filter Replacement

DBA Extreme Pads

Turbosmart Dual Port BOV

Tein S Tech Springs

Painted Calipers (Makes it look faster) ;-)
User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:
Contact Lancer1993

Re:

Postby Lancer1993 » Wed May 27, 2020 3:29 pm

gman90 wrote:After a lot of research finally got tow bar. Ralliart tow bar bolts straight on One small slot to cut just under rear plate but fits perfect when you remove tow tongue you can not notice the towbar at all. Gary

Not a RA but on my VRX they had to cut the bumper, so I did this... yes its a F1 style rain light, I've got it wired to my fog lights so it is only on when they are on.

2 bolts and a wire plug and it comes off ready for the tow hitch in seconds. I think its a nice solution to a problem that really should not exist.

Image
Image
My rides CJ VRX - CC coupe
Post Reply

Return to “Exterior”

Who is online

Users browsing this forum: No registered users and 22 guests