***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

LED Light Bar

HID's, Bulb's + LED Interior and Exterior Illumination.

Moderators: Moderators, Senior Moderators

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

LED Light Bar

Postby Lancer1993 » Wed Dec 06, 2017 7:08 am

I'm exploring options to add lights to my CJ for a road trip. Not planning any night driving but I like to be prepared.

Is mounting one of these LED light bars on a roof bar legal for HWY use?

https://www.ebay.com.au/itm/50inch-Curv ... Sw8axaA5nG

I have see other options with smaller ones mounted above the number plate.
Image
My rides CJ VRX - CC coupe

User avatar
MiracleLancer
Lancer Newbie
Lancer Newbie
Posts: 91
Joined: Wed Apr 19, 2017 4:21 pm
Location: Sydney

Re: LED Light Bar

Postby MiracleLancer » Wed Dec 06, 2017 7:50 am

Wouldnt it be similar to utes mounting spotties on the Roll bar?

They sit above the roof too. I suppose as long as you turn them off when you have on coming traffic or someone is in front of you.
CF Lancer GSR 2.4L CVT Sportback
Tenzo-R Cuzco V.1

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Re: LED Light Bar

Postby lancerdarryl » Wed Dec 06, 2017 10:51 am

Don’t know about the legality in QLD,but in NSW they are illegal. Also on the downside roof mounted lights flood the cabin with light so you can’t see very well. I’d just stick to a number plate mounting bracket and a small lightbar.
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: LED Light Bar

Postby Lancer1993 » Wed Dec 06, 2017 11:12 am

Yeah thought they might be. I was told even mounting a light bar on top of your bullbat is now illegal if the light is higher than the leading edge of the bonnet.

I'd prefer an install which is stealth, something which once removed you'd not see and holes or wires.

How strong is the top grill for mounting a light bar?
How heavy are they?
Image
My rides CJ VRX - CC coupe

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Re: LED Light Bar

Postby lancerdarryl » Wed Dec 06, 2017 1:31 pm

Front bumper isn’t really all that secure. You would have to try and brace the light from the steel part of the radiator support panel. I did one for my Evo and it was a very involved and complex job to do it. To do a similar thing to your car would involve cutting holes in the bumper..
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR

"Don't back off until you hit something"

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Re: LED Light Bar

Postby lancerdarryl » Wed Dec 06, 2017 1:34 pm

Image
Not the best picture but it may give you an idea
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR

"Don't back off until you hit something"

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: LED Light Bar

Postby bumblebee » Wed Dec 06, 2017 3:06 pm

Rather then go on hear say go and talk to your local transport department.
In qld there is no width limit other then light bar can not extend beyond width of vehicle
And a maximum of 4 additional driving lights
And lights mounted on roof sre perfectly legal

The elcheapo ebay ones are pure crapola in every way imaginable

If you want a decent led bar. Check out Stedi in melbourne
I can't wait to get one of theres around a 32 or 40 inch and mount it above the licence plate.
There is a licence plate mount that is airbah compatable. It think its made by "narva"
Do a search on the forum have posted all this info before

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: LED Light Bar

Postby Lancer1993 » Wed Dec 06, 2017 7:05 pm

All good ideas,

Darryl - think I saw the end result of the spotties on your CJ.

Maybe a 50" with special mounts running the width of the bumper just under the head lights... overkill?

I do have some small but powerful spotties I used to have on the coupe. Yes the CCs bumper feels noticeably stiffer as are the number plate mounts but it's worth considering for a budget install as I'd just need the wiring, relay and switch.
Image
Image
My rides CJ VRX - CC coupe

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: LED Light Bar

Postby bumblebee » Wed Dec 06, 2017 7:20 pm

One of these would be perfect

https://www.stedi.com.au/media/product/ ... ww-488.jpg

Comes with wiring. Relay. Freight to your door.and the led bar obviously
Awesome value for money and leaves the cheap and nasty ebay garbage for dead


https://www.stedi.com.au/st4k-28-inch-d ... t-bar.html

User avatar
keats1379
Lancer Newbie
Lancer Newbie
Posts: 77
Joined: Sun May 14, 2017 1:49 pm
Location: South Australia

Re: LED Light Bar

Postby keats1379 » Thu Dec 07, 2017 9:09 pm

bumblebee wrote:One of these would be perfect

https://www.stedi.com.au/media/product/ ... ww-488.jpg

Comes with wiring. Relay. Freight to your door.and the led bar obviously
Awesome value for money and leaves the cheap and nasty ebay garbage for dead


https://www.stedi.com.au/st4k-28-inch-d ... t-bar.html

If you tried, you could go up to a 32" curved (so then it will fit in the hole nicely) (the grille is slightly over 32" so should be a snug but good fit) stedi or other brand bar and mount it near the bottom lip of the bumper so it shines through the bottom grille.
I am looking at doing this to replace the 12" hard korr that i have installed on a number plate mount to get more throw distance, and because it wobbles a lot due to the plastic bumper, or i might have both installed for even more light :lol:

But if you do end up with a bar mounted like this, id love to hear how you did it, or if i get the time (and money :mrgreen: ) to buy the light bar and materials to do it, I'll show you :D
MY RIDE: Gold 2011 CJ Lancer SX Auto Sedan

Shoulda bought a manual :mrgreen:

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: LED Light Bar

Postby bumblebee » Fri Dec 08, 2017 5:51 am

32 inch mounted above the licence plate will be fine. Currently have a 20inch mounted like that
Its not too bad. Just wish it was brighter. Should have bought a Stedi in the first place.
I wont shove the bar behind the grille. Way too much effort for minimum gains

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: LED Light Bar

Postby Lancer1993 » Fri Dec 08, 2017 3:08 pm

How much do they weigh, I'd assume a 32" would be 33% heavier than a 20".
Image
My rides CJ VRX - CC coupe

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: LED Light Bar

Postby bumblebee » Fri Dec 08, 2017 5:55 pm

If you open the links i posted to Stedi it shows the weight

User avatar
Ronan.Butler11
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 356
Joined: Sun Apr 17, 2016 9:38 pm
Location: Sydney, NSW, AUS

Re: LED Light Bar

Postby Ronan.Butler11 » Sun Dec 10, 2017 5:11 am

Saw a few people had them mounted behind the front grill for max stealth, thinking of doing that in the future
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)

'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: LED Light Bar

Postby Lancer1993 » Sun Dec 10, 2017 8:59 am

Yeah saw that too but only issue there is its lower down than is ideal and the grill will block some of the light, so might be a lot of work for no gain.

Yes checked the links and found the weights, I also picked one up in SCA once, they feel heavy.

Will see what I can do for mounting options now I have a shinny new welder I can play with to make something up :)
Image
My rides CJ VRX - CC coupe


Return to “Lighting”

Who is online

Users browsing this forum: No registered users and 15 guests