***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Headlight wiring loom

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

User avatar
Masochist
Lancer Newbie
Lancer Newbie
Posts: 34
Joined: Mon Feb 02, 2015 11:19 am
Location: Toowoomba, QLD

Headlight wiring loom

Postby Masochist » Thu Aug 03, 2017 8:06 am

Hey guys,

Just wondering if anyone knows what the extra plug on the headlight wiring loom is used for. There the the main harness plug with the orange internals which controls indicator, hi/low beams etc, but i cant figure out what this 2nd plug is.

I have just replaced my headlights, new ones have an accessory wire for DRL. And just wondering whether this plug controlled the crappy led on the oem headlights.

Will add a photo later (too large from phone so need to adjust sizing.)

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Re: Headlight wiring loom

Postby aspir3 » Thu Aug 03, 2017 9:21 am

Model and year may help too.

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Re: Headlight wiring loom

Postby lancerdarryl » Thu Aug 03, 2017 4:54 pm

2nd plug is used in the factory HID lights,it controls the turning motor and the self levelling motor.
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Headlight wiring loom

Postby bumblebee » Thu Aug 03, 2017 7:19 pm

Very handy to know. Thanks for the info

User avatar
Masochist
Lancer Newbie
Lancer Newbie
Posts: 34
Joined: Mon Feb 02, 2015 11:19 am
Location: Toowoomba, QLD

Re: Headlight wiring loom

Postby Masochist » Thu Aug 03, 2017 8:10 pm

Before i go testing, does anyone know if these are constant or switched power? Having aftermarket headlights and never having the leveling motors i dont really need the oem leveling motor cabling anymore ... but would like it to power my DRL if possible. If its constant from engine on they make lige a lot easier

User avatar
Masochist
Lancer Newbie
Lancer Newbie
Posts: 34
Joined: Mon Feb 02, 2015 11:19 am
Location: Toowoomba, QLD

Re: Headlight wiring loom

Postby Masochist » Thu Aug 03, 2017 8:25 pm

Image

The new headlights installed

User avatar
Ronan.Butler11
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 356
Joined: Sun Apr 17, 2016 9:38 pm
Location: Sydney, NSW, AUS

Re: Headlight wiring loom

Postby Ronan.Butler11 » Thu Aug 03, 2017 8:48 pm

lancerdarryl wrote:2nd plug is used in the factory HID lights,it controls the turning motor and the self levelling motor.


wait... there is a HID loom in the CJ's already?? meaning plug and play for any projectors?

or am i completely misunderstanding this
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)

'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Re: Headlight wiring loom

Postby lancerdarryl » Thu Aug 03, 2017 11:01 pm

The plugs may be there but probably don't work.There will be relays missing and additional wiring looms inside the car missing also.
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR

"Don't back off until you hit something"

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Headlight wiring loom

Postby bumblebee » Fri Aug 04, 2017 6:52 am

Masochist wrote:Image

The new headlights installed


Very sexy indeed
Are they ADR approved?

User avatar
Masochist
Lancer Newbie
Lancer Newbie
Posts: 34
Joined: Mon Feb 02, 2015 11:19 am
Location: Toowoomba, QLD

Re: Headlight wiring loom

Postby Masochist » Fri Aug 04, 2017 8:52 pm

bumblebee wrote:
Masochist wrote:Image

The new headlights installed


Very sexy indeed
Are they ADR approved?


Unsure, asking the company i purchased from for confirmation. I dont see why not, they arent HID/LED conversions for headlights only projector conversion ... still using halogen globes (for now, til i can source some 'legal' conversion kits), and the DRL is ccfl not LED so again ... doesnt require automatic leveling/cleaning like hid/led DRL lights.

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Headlight wiring loom

Postby bumblebee » Sat Aug 05, 2017 6:29 am

If they are ADR compliance then its a mod i would certainly consider down the track for sure. Can i trouble you please for info on where to purchase these.
Thanks

User avatar
Masochist
Lancer Newbie
Lancer Newbie
Posts: 34
Joined: Mon Feb 02, 2015 11:19 am
Location: Toowoomba, QLD

Re: Headlight wiring loom

Postby Masochist » Sat Aug 05, 2017 7:45 am

bumblebee wrote:If they are ADR compliance then its a mod i would certainly consider down the track for sure. Can i trouble you please for info on where to purchase these.
Thanks


http://www.ebay.com.au/itm/232152444777

Or direct from supplier page

http://www.ctautoparts.com.au/3d-neon-l ... ion-x.html

User avatar
Masochist
Lancer Newbie
Lancer Newbie
Posts: 34
Joined: Mon Feb 02, 2015 11:19 am
Location: Toowoomba, QLD

Re: Headlight wiring loom

Postby Masochist » Sat Aug 05, 2017 8:09 am

Pretty sure it is

We ve sold more than 100 sets all over differs state
Never had any issue
--
Best regards,


CT Autoparts Pty. Ltd. Australia
Unit 14/ 367-369 Victoria Street, Wetherill Park 2164, Sydney, NSW , Australia
Tel: +61-2-9756 0138
Mob: +61 -405 924 864
Website: www.ctautoparts.com.au


Response from the guys that sold it. I will update if i find out otherwise

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Re: Headlight wiring loom

Postby lancerdarryl » Sat Aug 05, 2017 10:29 am

"Pretty sure it is".....that says to me they aren't ADR compliant.If they were then the answer would have been "Yes".
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR

"Don't back off until you hit something"

User avatar
Shaun Patterson
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 381
Joined: Fri Sep 05, 2014 9:59 pm
Location: Rockhampton Australia

Re: Headlight wiring loom

Postby Shaun Patterson » Sat Aug 05, 2017 3:28 pm

Masochist wrote:
bumblebee wrote:
Masochist wrote:Image

The new headlights installed


Very sexy indeed
Are they ADR approved?


Unsure, asking the company i purchased from for confirmation. I dont see why not, they arent HID/LED conversions for headlights only projector conversion ... still using halogen globes (for now, til i can source some 'legal' conversion kits), and the DRL is ccfl not LED so again ... doesnt require automatic leveling/cleaning like hid/led DRL lights.



there is no LEGAL hid conversion kits, for HID to be legal you need autoleveling projectors and headlight washers,, the leveeling is also impossible to retrofit and require so man gyros and sensors


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 22 guests