***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

* Mitsubishi OEM Parts for ClubCJ Members *

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
gange
Lancer Newbie
Lancer Newbie
Posts: 63
Joined: Fri Apr 04, 2014 10:33 pm
Location: Melbourne, Australia

Postby gange » Wed Aug 05, 2015 6:47 pm

Lancer1993 wrote:How hard is it to remove the center console? Im considering some carbon wrap for the bit around the manual gear leaver and maybe the doors under the AC controls.


It take about 10 min and about 10 screws. I did mine about 3 yrs ago.

The hardest part is disassembling the doors and putting them back together *facepalm*

User avatar
pauln2218
Lancer Learner
Lancer Learner
Posts: 2
Joined: Fri Oct 02, 2015 8:34 am
Location: Phoenix, Arizona, USA

Carbon Fibre B-Pillar - Still available?

Postby pauln2218 » Fri Oct 02, 2015 10:50 am

From doing some searching, it looks like this item (MZ314057) is discontinued. Is this something I could get my hands on?

Also, I'm assuming it will fit a 2015 US Lancer, as the pillars look to be unchanged over the years.

Does anyone have any knowledge about this? I did do some searching on the site, but there is not much mention of these recently.

triplenetz
Lancer Learner
Lancer Learner
Posts: 15
Joined: Mon Feb 16, 2015 11:13 pm
Location: Melbourne, Australia

Postby triplenetz » Fri Oct 02, 2015 10:34 pm

go to wrecker . i fixed my pillar with other early model lancer

User avatar
Metalstrix
Post Monster
Post Monster
Posts: 2739
Joined: Thu Dec 13, 2012 4:16 pm
Location: Sydney Australia

Postby Metalstrix » Fri Oct 02, 2015 10:42 pm

Hopefully when the elections come, we can get our chief buyer back xD
They will learn... I will always be a step ahead

No longer an active member.

burfadel
Lancer Ralliart
Lancer Ralliart
Posts: 526
Joined: Fri Oct 30, 2015 4:22 pm
Location: Adelaide, Australia

Postby burfadel » Wed Nov 04, 2015 4:37 pm

I'm very interested in the:

RA Air Intake Snorkel
1505A265 Duct Air Clean
RRP= A$155.90+
CCJ= A$135

Need to start my modding somewhere :)
I might add a pic of my car once I style the exterior a bit :).

Berek
Lancer ES/EX
Lancer ES/EX
Posts: 103
Joined: Tue Oct 28, 2014 10:15 pm
Location: Oz

Postby Berek » Wed Nov 04, 2015 6:22 pm

Metalstrix wrote:Hopefully when the elections come, we can get our chief buyer back xD


I hope so. Been waiting 6 months for parts :wink:
EOI. 2008 MY09 VRX Front bumper complete. Foggies, pods, grille, badge.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Nov 04, 2015 6:50 pm

The Chief Buyer has always been around.

There is a process to follow to order parts as mentioned here.

I will be stepping aside as VIC Admin and as Chief Buyer after this election but will provide support to whomever takes over from me.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

senseye
Lancer Learner
Lancer Learner
Posts: 7
Joined: Tue Sep 29, 2015 5:04 pm
Location: Sydney

Postby senseye » Sat Nov 07, 2015 6:22 pm

Hi ofey,

I'm interested in purchasing the following products:

MZ380402EX - Outer Scuff Plates - Stainless Steel (Font & Rear):
RRP=A$140+
CCJ= A$119

6370B403 Key, Door Lock Transmitter (With Boot open button):
RRP=A$157+
CCJ=A$140

I've also sent you a PM.

philsra
Lancer Newbie
Lancer Newbie
Posts: 94
Joined: Thu Feb 27, 2014 5:35 pm
Location: Ipswich QLD

Postby philsra » Sat Nov 28, 2015 2:35 pm

Picked up my full size spare wheel kit for RFG MR 936219. I was told it was the last one in existence as they are now obsolete :) . Now I just have to find a cheap 18" to keep as a spare. Waiting on my Ralliart SST foot rest as it has to come from japan. also getting some interior panels that get wear and tear while still available.
Just saying that as the CJ platform Fades some of the less used parts may become obsolete so if there's anything you want could be a good time to get.

deadfly180
Lancer Learner
Lancer Learner
Posts: 1
Joined: Fri Jan 27, 2017 4:21 pm

Floor mats

Postby deadfly180 » Sat Jun 24, 2017 11:02 am

Hi i am interested in purchasing the set of floor mats you have for the manual transmission. How can i purchase these.

Thanks

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Re: * Mitsubishi OEM Parts for ClubCJ Members *

Postby lancerdarryl » Sat Jun 24, 2017 1:20 pm

We don't have a chief buyer any longer,so I would suggest you go see Mitsubishi spares or have a look on eBay
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: * Mitsubishi OEM Parts for ClubCJ Members *

Postby Lancer1993 » Sat Jun 24, 2017 4:44 pm

From memory the genuine ones from the dealer cost around $100, it was one of the first things I got and well worth the cost. Especially for the drivers one which is well anchored to the floor and I've never had it move, 2 years on and they still look good!

BTW eBay is no cheaper unless you can find someone selling a used set.
Image
My rides CJ VRX - CC coupe

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: * Mitsubishi OEM Parts for ClubCJ Members *

Postby bumblebee » Sat Jun 24, 2017 7:02 pm

I bought a genuine set off ebay delivered to my door a few months ago for about $90
There is a few different styles..some have the rear in a long continues piece and some just the 2 main pieces that go under you feet etc. Just make sure you read the descriptions very well before ordering off ebay.the seller i found was based from memory in Sydney and a mitsy dealer

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: * Mitsubishi OEM Parts for ClubCJ Members *

Postby Lancer1993 » Sat Jun 24, 2017 8:16 pm

Only disappointing thing about the genuine ones I got were the rear mats, they fit great but tend to move too easily with rear passengers feet.
Image
My rides CJ VRX - CC coupe


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 27 guests