***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

WTB - Ralliart Snorkel

Post Things You Are Wanting To Buy Or Trade.

Moderators: Moderators, Senior Moderators

User avatar
Bigdamos
Lancer Newbie
Lancer Newbie
Posts: 49
Joined: Sat Jul 12, 2014 9:51 am
Location: Buderim, Sunshine Coast, Australia

Postby Bigdamos » Sun Aug 16, 2015 8:23 pm

I have heard, however I could be wrong, that the Ak Racing ralliart snorkel is genuine. I think...

Swerve
Lancer VR/GT
Lancer VR/GT
Posts: 262
Joined: Sun Aug 09, 2015 8:52 pm
Location: Australia

Postby Swerve » Sun Aug 16, 2015 9:33 pm

Might give them a go, do the plastic push pins or does it need to be cable tied?

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Tue Aug 18, 2015 5:25 pm

Okay checked the Mitsy dealer this morning and he gave a cost of $170, so $115 is looking a lot better.

You should be able to use the current push pins but they aren't that expensive even from the dealer. Needed some for my coupe in the lower part of the bumper and were only a few dollars from memory.
Image
My rides CJ VRX - CC coupe

Swerve
Lancer VR/GT
Lancer VR/GT
Posts: 262
Joined: Sun Aug 09, 2015 8:52 pm
Location: Australia

Postby Swerve » Tue Aug 18, 2015 8:12 pm

Yeah mines $170 + shipping. There's only one Mitsubishi dealer here and in the whole state AFAIK and whenever I ask for something it always needs to be shipped up. And talking to the panel beaters apparently the dealer actually doesn't keep stock of 90% of parts. I've asked for Footwell Lights, RA Bonnet, RA Intake, Quarter Panel, Foglights, Double Din Facia and a few others.

Swerve
Lancer VR/GT
Lancer VR/GT
Posts: 262
Joined: Sun Aug 09, 2015 8:52 pm
Location: Australia

Postby Swerve » Tue Aug 18, 2015 8:14 pm

I needed the push pins that hold in the black panel that goes across the top of the grill and under the intake snorkel. Cost me $8 per pin.

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Tue Aug 18, 2015 8:22 pm

Should be able to use the current ones, $8 is a bit steep, I'd rather zip tie it LOL
Image
My rides CJ VRX - CC coupe

Swerve
Lancer VR/GT
Lancer VR/GT
Posts: 262
Joined: Sun Aug 09, 2015 8:52 pm
Location: Australia

Postby Swerve » Tue Aug 18, 2015 8:26 pm

My current ones are missing, my mate and I thought it was a good idea to leave all the push pins for the intake, grill cover and tyre wells on the windscreen where the wipers are. Jumped in to make a quick trip around the block. All gone. We are hopeless.

I've also found:

- His lighter inside my front bumper behind the fog light covers about a month after he touched it.
- My little side cutters under the black grill cover probably 6 months after it was last removed.

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Tue Aug 18, 2015 9:41 pm

Sounds like someone who needs a tool caddy, I use mine all the time. Tools and parts go in as I work on the car so I can find them later.

Back to the RA snorkel if others want to contact AK Racing they can, maybe if enough of us do then we'll get a good price?

http://www.akracing.com.au/
Image
My rides CJ VRX - CC coupe

Swerve
Lancer VR/GT
Lancer VR/GT
Posts: 262
Joined: Sun Aug 09, 2015 8:52 pm
Location: Australia

Postby Swerve » Tue Aug 18, 2015 9:50 pm

Also RPW has the I believe genuine RA snorkel for $159 and Scorpion Motorsports has one for $126. I'm eyeing up RPW as they also have the K&N SRI for a really good price.

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Wed Aug 19, 2015 8:29 am

The Scorpion is about $160 with shipping so IMHO better off just paying Mitsy and getting it from the dealer, probably withing a few days.

Again if we can get them for around the $115 mark well be doing good, much above $150 then we're better off going to the dealer.

I do have a question, using a VIN number for a car you don't own, does that list that someone bought a part using that VIN number which the owner of that car will then find out?
Image
My rides CJ VRX - CC coupe

Swerve
Lancer VR/GT
Lancer VR/GT
Posts: 262
Joined: Sun Aug 09, 2015 8:52 pm
Location: Australia

Postby Swerve » Wed Aug 19, 2015 8:42 am

That's a good question mate. Yeah I'd want to know if you can use any VIN or do you need proof of ownership. Or do they log it. Because it's look a bit suss with one RA VIN purchasing 3 or 4 intakes.

The only reason I'd go RPW is because I want the SRI and if I buy both together the shipping is cheaper. And my Mitsubishi dealer would need to ship the part anyway.

But if the price is significantly cheaper I'd buy it elsewhere

User avatar
Humur0us
Lancer Learner
Lancer Learner
Posts: 13
Joined: Fri Aug 07, 2015 10:18 am
Location: Brisbane, Australia

Postby Humur0us » Wed Aug 19, 2015 10:32 am

I'm keen for this if we get a good deal :)
Image

JFT96

User avatar
megatron
Lancer Legend
Lancer Legend
Posts: 1364
Joined: Tue Jun 08, 2010 9:56 pm
Location: Brendale

Postby megatron » Wed Aug 19, 2015 10:58 am

the ones we sell are 100% genuine, can post up a picture when we get more in, in a few weeks all sold out atm

User avatar
Humur0us
Lancer Learner
Lancer Learner
Posts: 13
Joined: Fri Aug 07, 2015 10:18 am
Location: Brisbane, Australia

Postby Humur0us » Wed Aug 19, 2015 11:11 am

Apparently won't fit on the 2015 cj? If that's the case then I'm out :(
Image



JFT96

User avatar
megatron
Lancer Legend
Lancer Legend
Posts: 1364
Joined: Tue Jun 08, 2010 9:56 pm
Location: Brendale

Postby megatron » Wed Aug 19, 2015 11:13 am

Humur0us wrote:Apparently wont fit on the 2015 cj? If thats the case then Im out :(


correct they only fit 2.4L 2015, not 2.0L


Return to “Buying & Trading”

Who is online

Users browsing this forum: No registered users and 12 guests