***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Reverse parking sensor wiring

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

User avatar
chunky9
Lancer Evolution
Lancer Evolution
Posts: 821
Joined: Sun May 27, 2012 10:21 pm
Location: Sydney, New South Wales

Reverse parking sensor wiring

Postby chunky9 » Fri Mar 15, 2013 1:15 pm

Hey guys,
Are these the factory reverse sensors?
Image
Image
Image

I need the all the wiring parts to it. I know that the factory ones are plug and play into the reverse light harness.
If they are the factory oes, would the easiest way be to just buy a whole new set and use those wires? Or is there's somewhere I can actually just buy the wiring from?

Thanks guys

User avatar
Fitter
Club Vendor
Club Vendor
Posts: 1288
Joined: Mon Mar 29, 2010 1:34 pm
Location: Brisbane

Postby Fitter » Fri Mar 15, 2013 1:41 pm

I'd just buy an aftermarket kit. Cheaper and then u have everything
CLUB CJ CAR AUDIO VENDOR
Owner and Builder of Australia's LOUDEST STREET LEGAL Lancer 147.5dB

2013 WORLD TITLE
2012 QLD State Champion
2008 Australian Champion

Image

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Fri Mar 15, 2013 1:55 pm

i bought some from mitsu and they look like this

Image

i have the full kit, some of it still in the car if your interested in buying some.
210 KWATW 400nm RALLIART Virtual Dyno 1/1
http://goo.gl/GrUosm


Image

User avatar
chunky9
Lancer Evolution
Lancer Evolution
Posts: 821
Joined: Sun May 27, 2012 10:21 pm
Location: Sydney, New South Wales

Postby chunky9 » Fri Mar 15, 2013 2:09 pm

Oh wow it's complete different haha. I was told they were factory -___-
Thanks man. I'll keep exploring options lol

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Fri Mar 15, 2013 2:40 pm

if u dont have any luck, as i said mine are for sale, i just have to pull the control unit out of the car.
210 KWATW 400nm RALLIART Virtual Dyno 1/1

http://goo.gl/GrUosm





Image

User avatar
chunky9
Lancer Evolution
Lancer Evolution
Posts: 821
Joined: Sun May 27, 2012 10:21 pm
Location: Sydney, New South Wales

Postby chunky9 » Fri Mar 15, 2013 7:34 pm

Well nuts. I think I'll just keep the parking sensors there as placeholders for now. Don't want to be splicing up wires just yet. Cars not even 1 year old lol.
Thanks for the help guys. Appreciate it.

User avatar
Fizzlefuzzle
Lancer Ralliart
Lancer Ralliart
Posts: 723
Joined: Tue Sep 18, 2012 1:05 pm
Location: Rawson, australia

Postby Fizzlefuzzle » Fri Mar 15, 2013 8:42 pm

Steve is it easy to install?? How much are you selling for?
<b> Proud owner of Australia's and club cj's first glitter pink 2011 CJ Mitsubishi Ralliart Lancer :) </b>


<i> Life is short, so are my dogs! (corgi life) (basset life) </i>


Mod thread ; http://clubcj.net/viewtopic.php?p=297953 (cj-black)

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Fri Mar 15, 2013 10:22 pm

i didnt install them jessica, mitsu did, so i`not sure how hard they are wiring wise, u do have to drill 4 holes in the rear guard though for the pictured sensors.

as for price, i`m not sure, i hadnt thought about it till i saw this thread.

i`f your keen pm me and we`ll work one out :)
210 KWATW 400nm RALLIART Virtual Dyno 1/1

http://goo.gl/GrUosm





Image

User avatar
SIX
Post Monster
Post Monster
Posts: 3251
Joined: Fri Nov 16, 2012 9:44 pm
Location: Northern Adelaide

Postby SIX » Fri Mar 15, 2013 10:25 pm

im going to be honest , i have got my factory ones disconnected, when i had the reversing camera put in , and i dont think id every get a car with them again
1998 MR lancer
2009 CJ lancer sportback
2011 Renault Sport RS250 Trophee Cup
2000 Tommi Makenin Evolution 6.5

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Fri Mar 15, 2013 10:29 pm

yeah, i had my rear bar replaced and didnt bother putting them back, they work well but probably unnecessary.
210 KWATW 400nm RALLIART Virtual Dyno 1/1

http://goo.gl/GrUosm





Image

amautotech
Lancer Learner
Lancer Learner
Posts: 8
Joined: Mon Oct 26, 2015 9:42 pm
Location: Qatar

Postby amautotech » Tue Dec 15, 2015 4:34 pm

I am planning to buy kit of 4 parking sensors and control unit, Could anyone guide for a good brand available on Ebay??

I checked local market(Qatar) and found one called DIAMOND parking sensors($82 including installation), the shop keeper said its good. There was another around $54(unbranded)which he said was not that good
Lancer Ex GLX CVT 2.0 2015 (Automatic) YM E24

Swerve
Lancer VR/GT
Lancer VR/GT
Posts: 262
Joined: Sun Aug 09, 2015 8:52 pm
Location: Australia

Postby Swerve » Tue Dec 15, 2015 4:41 pm

Smartpark is a solid brand I've installed a lot of these for individuals and on company fleet vehicles including mines and government. Never had an issue with them and they can look OEM.

http://www.smartpark.net/

User avatar
SAM-24A
Alumni
Alumni
Posts: 2921
Joined: Sun May 17, 2009 4:40 pm
Location: Sydney NSW

Postby SAM-24A » Tue Dec 15, 2015 5:08 pm

As Jay aka Swerve mentioned .... Smart Park are the best money can buy here in Australia.

They have Solid State circuitry & every component in their kits are premium parts.

I've personally installed 7 kits for family and never had a problem.

Here is a link to post I did back in April 2010 (5yrs ago)
REVERSE PARKING SENSORS

The model in the post is a PDC-120PI, but it has since been refined and upgraded to the current model PDC-125PI

You can ring ZORG Industries in Sydney, who are the Manufacturer on (02) 9439 9439 and buy direct of them.
The last kit I purchased 3mths ago was approx $160 + $10 P&H in Sydney.
Sam ..... *thumb*
Merlinised MIVEC - AspiRe 2.4L

Swerve
Lancer VR/GT
Lancer VR/GT
Posts: 262
Joined: Sun Aug 09, 2015 8:52 pm
Location: Australia

Postby Swerve » Tue Dec 15, 2015 7:32 pm

Looks like he is in Qatar not Australia might need an international number

User avatar
SAM-24A
Alumni
Alumni
Posts: 2921
Joined: Sun May 17, 2009 4:40 pm
Location: Sydney NSW

Postby SAM-24A » Tue Dec 15, 2015 7:41 pm

OH crap .... *eek* .... your right Jay .... I didn't see his location.
I don't think they will post Qatar.

Anyway, it's good info for our club members.
Sam ..... *thumb*
Merlinised MIVEC - AspiRe 2.4L


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 9 guests