***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Vinyl over Ralliart fog lights placeholders?

Vinyls, Decals & Graphic Ext/Interior Modifications.

Moderator: Senior Moderators

User avatar
Chubb
Post Monster
Post Monster
Posts: 2615
Joined: Fri Oct 16, 2009 8:04 am
Location: Uralla, NSW, Australia

Postby Chubb » Tue Jul 24, 2012 11:26 pm

WTR wrote:[quote:8b91a2a347=Chubb].........As for the foggies I assume they would be the same as the RA ones which are around the $500 mark, all the cheap ebay ones are for the standard bumpers and would not fit.[/quote:8b91a2a347] Why would you assume that the 2012 ActIv fogs are the same as the RA ?


because Ron a 2012 active has a Ralliart front end just like the 2012 VRX. That is why I assume Ron.

User avatar
Seal Cub
Lancer ES/EX
Lancer ES/EX
Posts: 190
Joined: Tue Nov 01, 2011 8:30 pm
Location: Sydney

Postby Seal Cub » Tue Jul 24, 2012 11:26 pm

Ron, because my Activ has an RA front bumper :)

WTR
Lancer Evolution
Lancer Evolution
Posts: 892
Joined: Sun Apr 04, 2010 8:16 pm
Location: Hawkesbury, NSW

Postby WTR » Tue Jul 24, 2012 11:29 pm

Meaty wrote:that aint no activ front end... unless you forgot to check the picture ron


Well .... actually it is a 2012 front end ..

Try to keep up, Tate ...

WTR
Lancer Evolution
Lancer Evolution
Posts: 892
Joined: Sun Apr 04, 2010 8:16 pm
Location: Hawkesbury, NSW

Postby WTR » Tue Jul 24, 2012 11:32 pm


User avatar
Meaty
Lancer Evolution
Lancer Evolution
Posts: 978
Joined: Wed Nov 10, 2010 4:30 pm
Location: Melbourne Australia

Postby Meaty » Tue Jul 24, 2012 11:33 pm

so its a RA front end on a 2012 model ... big deal a tomato by any other name is still a tomato

im sure part numbers are not different from the RA, meaning its a RA front end
Image

User avatar
Tong-sea
Lancer VR/GT
Lancer VR/GT
Posts: 201
Joined: Mon Jun 11, 2012 10:52 am
Location: Melbourne

Postby Tong-sea » Tue Jul 24, 2012 11:34 pm

I called the dealer about a week ago, asked for set of foglights installed.
Quote: $385 for the fglight plus 2hr labor @ $90/hr... Probably too much for me... :(
Thong-sea

WTR
Lancer Evolution
Lancer Evolution
Posts: 892
Joined: Sun Apr 04, 2010 8:16 pm
Location: Hawkesbury, NSW

Postby WTR » Tue Jul 24, 2012 11:37 pm

Meaty wrote:so its a RA front end on a 2012 model ... big deal a tomato by any other name is still a tomato im sure part numbers are not different from the RA, meaning its a RA front end


and a turkey is still a turkey ... etc... etc...

So get the part no.s from Mitsu and prove me wrong ...

User avatar
blade888
Lancer Evolution
Lancer Evolution
Posts: 937
Joined: Wed Aug 05, 2009 8:53 am
Location: Sydney, Australia

Postby blade888 » Wed Jul 25, 2012 9:06 am

Hi all :)

A while back when the Activ's first came out I did some investigation into what front bar the car used out of my own interest (as my dad liked the look of it and was wondering about it for his SX)

I did get a confirmation that it is indeed a Ralliart front bumper used on the Activs from two Dealerships. Suttons Mitsubishi Arncliffe and Alto Mitsubishi.

Suttons confirmed and here's a reference as an example of their listing on their website for one for sale, note it states "Ralliart Front Bumper"
Link:
Lancer Active at Sutton's Mitsubishi

Alto confirmed and also referred me to the Offical Mitsubishi Australia Brochures for the Lancer Activ.

As seen below they state it's a "Ralliart Front Bumper and grille".

Image


So yes it's the Same bar, two different cars. Nuff said, end of story. :)


As for the foggies, yea they are expensive mate, couple of members here have unfortunately cracked theirs in the past and got a bit of a shock when given the price.

I reckon some deep read Vinyl offcuts would do well, subtle yet gives it a mean look :) Check out a local sign maker shop, they might have some offcuts they could sell you.

Good luck! :D
Image
Sportback VR/GReddy Spectrum Elite/Advanti Medusa/K&N High-Flow Performance Panel Filter/Cusco Racing Braces

User avatar
Seal Cub
Lancer ES/EX
Lancer ES/EX
Posts: 190
Joined: Tue Nov 01, 2011 8:30 pm
Location: Sydney

Postby Seal Cub » Wed Jul 25, 2012 10:31 am

I actually did get my Activ from Suttons Mitsubishi in Arncliffe!

Can't wait to get my hands on some of the red vinyl, I'll definitely post a photo here when I'm done.

User avatar
Meaty
Lancer Evolution
Lancer Evolution
Posts: 978
Joined: Wed Nov 10, 2010 4:30 pm
Location: Melbourne Australia

Postby Meaty » Wed Jul 25, 2012 4:18 pm

Shit ron I hate to say i told you so, but you seem to have your foot shoved in your mouth.....

Well enough gloating over your lame attempt at calling me a turkey, when obviously you need to "try to keep up".

Thanks for the troll attempt anyway.
Image

WTR
Lancer Evolution
Lancer Evolution
Posts: 892
Joined: Sun Apr 04, 2010 8:16 pm
Location: Hawkesbury, NSW

Postby WTR » Wed Jul 25, 2012 6:03 pm

Meaty wrote:Shit ron I hate to say i told you so, but you seem to have your foot shoved in your mouth..... Well enough gloating over your lame attempt at calling me a turkey, when obviously you need to try to keep up. Thanks for the troll attempt anyway.



Thanks, Nick .... cleared that up nicely .. :D

User avatar
billy boy
Lancer Evolution
Lancer Evolution
Posts: 782
Joined: Sun Nov 22, 2009 5:10 pm
Location: Adelaide

Postby billy boy » Fri Jul 27, 2012 10:40 am

hey mate, i've ordered a fog light delete kit for my RA, so will be taking out my foglights in a few weeks time - if you are after them, im sure we can work something out :)
we are fascinated by that which can destroy us...

User avatar
ninjured
Lancer VR/GT
Lancer VR/GT
Posts: 250
Joined: Thu May 12, 2011 12:59 pm
Location: townsville, aus

Postby ninjured » Fri Jul 27, 2012 12:17 pm

Image

User avatar
Seal Cub
Lancer ES/EX
Lancer ES/EX
Posts: 190
Joined: Tue Nov 01, 2011 8:30 pm
Location: Sydney

Postby Seal Cub » Sun Aug 12, 2012 1:20 pm

Image

A quick and temporary solution while I wait on some real vinyls from a friend. Used a cheap coloured adhesive lol. I can just remove it easily anyway.

User avatar
VicQ
Lancer Learner
Lancer Learner
Posts: 7
Joined: Tue Sep 18, 2012 5:39 pm
Location: Sydney, Australa

Postby VicQ » Tue Sep 18, 2012 6:18 pm

Hey Twellsy, just wondering if you are still able to get any more vinyl? i've got a activ w/o fogs too. thinking of covering it with silver (glass like) vinyl for now.
Twellsy wrote:Hey Zik , pm me what you want ( color , amount and phone number ) I can get some from a mate who owns a sign company he always has a tone of left overs He has done my bumper in red and now in black and given me extra black with off cuts and has never charged me Cheers Twellsy


Return to “Vinyls & Graphics”

Who is online

Users browsing this forum: No registered users and 14 guests