any offer over $100 accepted***** ALERT - Nominations for your new ClubCJ Committee can be made here *****
FS: OEM Ralliart Coilovers
Moderators: Moderators, Senior Moderators
-
tangoforsyth
- Lancer Learner
- Posts: 15
- Joined: Thu Feb 04, 2010 3:34 am
- Location: Tapping in WA
- Contact:
Hi Ral1rt, I am looking to stiffen up the ride in my Missus 2008 VR and as far as I can work out they will be a straight swap for the OEM's. 
I know I am probably pushing my luck
but are those struts still available and how much would you like?? Part 2 of the dumb question is, if I can tee up the transport could you forward them to WA (unless there are some ones in WA floating about, hint hint guys)??
P.S. I am not looking to Hijack the thread with the last question
I know I am probably pushing my luck
but are those struts still available and how much would you like?? Part 2 of the dumb question is, if I can tee up the transport could you forward them to WA (unless there are some ones in WA floating about, hint hint guys)??
P.S. I am not looking to Hijack the thread with the last question
-
Ral1rt
- INACTIVE Member Account
- Posts: 481
- Joined: Sun Nov 29, 2009 9:14 am
- Location: Melbourne Victoria
Hey tony, No probs mate
The coil overs are a direct replacement but they will increase the ride height on the vr. I'm not sure why but they seem to increase the height of them. If you wanted to lower the car aswell you could put a lower progressive rate spring on the coil over but to be honest, if its just a stiffer ride your after, maybe a better set of springs would be a better option.
Postage will be expensive too, $150 + to WA as they way a tonne
IMO try to find some stiffer springs in WA. Maybe RPW can help. It will give you an easier solution.
The coil overs are a direct replacement but they will increase the ride height on the vr. I'm not sure why but they seem to increase the height of them. If you wanted to lower the car aswell you could put a lower progressive rate spring on the coil over but to be honest, if its just a stiffer ride your after, maybe a better set of springs would be a better option.
Postage will be expensive too, $150 + to WA as they way a tonne
IMO try to find some stiffer springs in WA. Maybe RPW can help. It will give you an easier solution.
Owner: Matt Stewart
09 Ralliart tuned at MPC
13.22 @ 106mph Australia's 2nd fastest Ralliart. (Ill get you captain )
09 Ralliart tuned at MPC
13.22 @ 106mph Australia's 2nd fastest Ralliart. (Ill get you captain
)
Who is online
Users browsing this forum: No registered users and 5 guests