***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

3M Di-Noc Carbon Fiber Vinyl

Vinyls, Decals & Graphic Ext/Interior Modifications.

Moderator: Senior Moderators

n_aghdassi
Lancer ES/EX
Lancer ES/EX
Posts: 160
Joined: Mon Jun 13, 2011 9:11 pm
Location: Perth

3M Di-Noc Carbon Fiber Vinyl

Postby n_aghdassi » Thu Jun 16, 2011 2:29 pm

hey guys. i am going to wrap my interior bits in this stuff and i was wondering the best place to get it in perth. i dont mind ordering from websites either. anyone else bought from the net?
also after 3M's Super #77 spray glue

User avatar
Cami_Kaze
Lancer Newbie
Lancer Newbie
Posts: 68
Joined: Wed May 18, 2011 2:12 pm
Location: Australia

Postby Cami_Kaze » Thu Jun 16, 2011 4:58 pm

Will be interested to see how this goes :)

User avatar
Nick07
Lancer Ralliart
Lancer Ralliart
Posts: 599
Joined: Fri Jul 16, 2010 8:05 pm
Location: Perth, Australia

Postby Nick07 » Thu Jun 16, 2011 5:47 pm

If you look at the forums there is actually a sponsor. But they are located over east.

User avatar
Meaty
Lancer Evolution
Lancer Evolution
Posts: 978
Joined: Wed Nov 10, 2010 4:30 pm
Location: Melbourne Australia

Postby Meaty » Thu Jun 16, 2011 9:17 pm

i was hioping this topic might get a bit more interest as i have been looking around at getting some 3M Di-Noc in the distant future ............ *mutters something about ofey tempting him with goodies*.....
Image

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Thu Jun 16, 2011 9:33 pm

I got my 3M super 77 from Neffy Wrap when I ordered the fabric too.

I did a bit of a google ages ago and noticed somewhere in Sydney that said they stocked it. I never confirmed.

I have found the Bostik spray adhesive is not too bad... Not as good as the 3M stuff though.

User avatar
JaCe
Alumni
Alumni
Posts: 1819
Joined: Thu Jun 04, 2009 7:17 am
Location: Sydney, AU

Postby JaCe » Thu Jun 16, 2011 11:39 pm

There's another thread on similar stuff > http://clubcj.net/viewtopic.php?t=4671& ... c&start=30

... that being said it should be moved here.
Image

"A man who stands for nothing, falls for anything."

n_aghdassi
Lancer ES/EX
Lancer ES/EX
Posts: 160
Joined: Mon Jun 13, 2011 9:11 pm
Location: Perth

Postby n_aghdassi » Fri Jun 17, 2011 1:54 am

hey guys, yeah i found out our sponsor is and i am searching through the forum for the prices..
i shall keep everyone posted on how i go. damn everything decent being over east or america...

User avatar
lukeaday
Club Sponsor
Club Sponsor
Posts: 781
Joined: Sun Sep 06, 2009 5:23 pm
Location: Melbourne, Australia

Postby lukeaday » Fri Jun 17, 2011 5:13 pm

Hows it going guys.
Not sure what sponsor you are talking about in the EAST but I am in Melbourne Victoria and I sell 3M Di-Noc Carbon Fibre vinyl.

May I also note, There seems to be a little bit of confusion within the thread regarding application of this product.

3M Di-Noc Carbon Fibre Vinyl is a self adhesive vinyl where as neffy wrap is a fabric and requires the use of 3M super 77 spray on contact adhesive or simular product to create a bond.

May I also add that if anyone plans to apply the Di-Noc on tight complex curves you should use 3M primer 94.
I am currently trying to get hold of small quantities to keep small DIY one off job costs down.

Cheers, Luke
Official ClubCJ Sponsor.
Image

User avatar
HobartLancer09
Lancer Newbie
Lancer Newbie
Posts: 68
Joined: Sat Apr 09, 2011 5:53 pm
Location: Hobart

Postby HobartLancer09 » Wed Sep 21, 2011 12:45 pm

Are there any good places in sydney to get this. I'm heading to syd for a few days in nov, thought i might buy some.

User avatar
Mitsi
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 458
Joined: Wed Sep 22, 2010 12:16 pm
Location: Brisbane, Australia

Postby Mitsi » Wed Sep 21, 2011 1:39 pm

@Luke, was thinking of wrapping our RA bonnet in CF but my brother says that water will get trapped under and start it rusting and it will also fade, is that right?
2010 Lancer Ralliart <3

jhonknes
Lancer Learner
Lancer Learner
Posts: 2
Joined: Tue Aug 14, 2012 9:45 pm
Location: usa
Contact:

Postby jhonknes » Tue Aug 14, 2012 9:49 pm

Spammer - content removed.

User avatar
Fitter
Club Vendor
Club Vendor
Posts: 1288
Joined: Mon Mar 29, 2010 1:34 pm
Location: Brisbane

Postby Fitter » Tue Aug 14, 2012 9:50 pm

Jhon, we already have club sponsors for vinyl wrapping.
CLUB CJ CAR AUDIO VENDOR
Owner and Builder of Australia's LOUDEST STREET LEGAL Lancer 147.5dB

2013 WORLD TITLE
2012 QLD State Champion
2008 Australian Champion

Image


Return to “Vinyls & Graphics”

Who is online

Users browsing this forum: No registered users and 9 guests