***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

carbon wrap on the dash?

Vinyls, Decals & Graphic Ext/Interior Modifications.

Moderator: Senior Moderators

User avatar
liam92
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 306
Joined: Fri Jul 02, 2010 8:47 pm

Postby liam92 » Wed Sep 29, 2010 4:44 pm

I was only thinking this today. There are a few areas Im concerned with, the "SRS Airbag" logo which would have to have the letters cut around in the vinyl, or alternatively remove the letters from the dash. And ofcourse the actual airbag. It would be easy enough to wrap the whole dash and cut around the slot for the passenger side dashboard but does the airbag split that panel or just pop it up? If it splits then obviously it isnt possible to wrap it.


Plain wraps might also show through the texture of the dash, something like the 3m DiNoc carbon wouldnt though I would imagine.

User avatar
milobob
Lancer Legend
Lancer Legend
Posts: 1130
Joined: Mon Aug 31, 2009 6:16 pm
Location: Melbourne

Postby milobob » Wed Sep 29, 2010 4:47 pm

I don't think you'd want it too shiny.. so no clear coat on it?
2010 RenaultSport Megane RS250 Cup Trophee (Xenons+Leather+Front Parkers)

User avatar
liam92
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 306
Joined: Fri Jul 02, 2010 8:47 pm

Postby liam92 » Wed Sep 29, 2010 4:50 pm

The DiNoc fabric is matt finish, I wouldnt be putting another layer of wrap over the top if I were you.

Thinking about it to overcome the SRS logo you could trace it onto paper and get a vinyl shop to cut it out for you. Then just wrap the dash from that side and work your way across

User avatar
bunnishiwa
Lancer Legend
Lancer Legend
Posts: 1284
Joined: Thu Dec 24, 2009 4:22 pm
Location: Rye, Melbourne

Postby bunnishiwa » Thu Sep 30, 2010 6:09 pm

Hey Travis,

It's Marc from Danks. Long time no see, how's things mate. You up in Berwick now? Still working for Knox Mitsu?

Still love yer car :D
- Self tuned - work in progress - tune revision #16_03
- GS 3 port controlled wooooot :)
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar



Noli Timere Messorem

User avatar
bunnishiwa
Lancer Legend
Lancer Legend
Posts: 1284
Joined: Thu Dec 24, 2009 4:22 pm
Location: Rye, Melbourne

Postby bunnishiwa » Thu Sep 30, 2010 6:24 pm

That's one sick n clean looking car - forgot how fanatical you are re the EVO thing. You on the 9-5, if so I'll have to pop up one night after work.

All good with me otherwise - living down at Rye, still at Danks (same shit, different day :) )

Be good to get back in touch with you - the Dad thing treating you well?
- Self tuned - work in progress - tune revision #16_03

- GS 3 port controlled wooooot :)

- Lowered on Kings

- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP

- Awesome self installed Alpine/JL Audio sound system

- Whiteline Rear Swaybar







Noli Timere Messorem

User avatar
draevon
Lancer Ralliart
Lancer Ralliart
Posts: 689
Joined: Fri Oct 23, 2009 9:09 am
Location: Brisbane
Contact:

Postby draevon » Fri Oct 01, 2010 2:25 pm

I declare OFF TOPIC :)

Anyways. 3M Di-Noc would do the job great, and it's matt so wouldn't be too distracting. It stretches pretty well and is very workable. If you've got no airbags then there wouldn't really be any issues. Personally however, I think that's be waaay too much Di-Noc for the inside of the car. I think it's better inside for just trims and enhancements.

(That said, I did my whole roof in Di-Noc, so if you think it would look good, then go for it :) ... shouldn't even cost too much)
.
Image
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.

User avatar
Fitter
Club Vendor
Club Vendor
Posts: 1288
Joined: Mon Mar 29, 2010 1:34 pm
Location: Brisbane

Postby Fitter » Mon May 14, 2012 6:28 pm

Any covering over the airbag will render the vehicle with a defect and unroadworthy.
CLUB CJ CAR AUDIO VENDOR
Owner and Builder of Australia's LOUDEST STREET LEGAL Lancer 147.5dB

2013 WORLD TITLE
2012 QLD State Champion
2008 Australian Champion

Image


Return to “Vinyls & Graphics”

Who is online

Users browsing this forum: No registered users and 5 guests