***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Windsceen Decal/Sticker - Thoughts?!?!

Vinyls, Decals & Graphic Ext/Interior Modifications.

Moderator: Senior Moderators

User avatar
skeg
Lancer Learner
Lancer Learner
Posts: 16
Joined: Tue Nov 17, 2015 11:13 pm
Location: Pakenham

Windsceen Decal/Sticker - Thoughts?!?!

Postby skeg » Tue Nov 24, 2015 8:49 pm

Hey All,

New around here and just wanted to get some opinions on the art work I'm doing for the front and rear windscreens.. This will end up on my XLS (Cool silver).

Feel free to bag it out.. or praise me.. hahah. I want any and all feedback. Please excuse my lack of spelling also. :roll: Appreciate the pick up.

I'm not sure if I'll get this printed on vinyl or cut instead.. Anyways, let me know what you all think.

Cheers

Image
Last edited by skeg on Wed Nov 25, 2015 10:54 am, edited 1 time in total.

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Tue Nov 24, 2015 9:25 pm

They look good, personally I think the top one looks too busy.

So are these a design you have on your computer?
How much are you expecting them to cost?
Image
My rides CJ VRX - CC coupe

User avatar
Dire
Post Monster
Post Monster
Posts: 3042
Joined: Tue Mar 09, 2010 6:38 pm
Location: Canning Vale (Perth)

Postby Dire » Tue Nov 24, 2015 9:40 pm

Mitsu...bihi?
Image

User avatar
Gavin.CHK
Lancer Newbie
Lancer Newbie
Posts: 23
Joined: Tue Sep 15, 2015 9:53 pm
Location: Melbourne

Postby Gavin.CHK » Tue Nov 24, 2015 9:46 pm

are you missing an 'S'? O.o or was that deliberate?

User avatar
Gavin.CHK
Lancer Newbie
Lancer Newbie
Posts: 23
Joined: Tue Sep 15, 2015 9:53 pm
Location: Melbourne

Postby Gavin.CHK » Tue Nov 24, 2015 9:46 pm

love both designs otherwise :P

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Tue Nov 24, 2015 10:11 pm

Yes I noticed that too... really I did :)
Image
My rides CJ VRX - CC coupe

User avatar
skeg
Lancer Learner
Lancer Learner
Posts: 16
Joined: Tue Nov 17, 2015 11:13 pm
Location: Pakenham

Postby skeg » Wed Nov 25, 2015 10:52 am

Hahaha, how good is my spelling? Thanks for the pick up guys. I shall be changing that tonight. :shock:

I was thinking the bottom one also, as its pretty much replicating the one that use to be offered by Mitsubishi. Well from the artwork I can find. I'm thinking the top might pop more on the car though, due to it being silver?!!?

@Lancer1993 - Yes these are on my computer (Ex-sign writer, now do it for a hobby), and I don't think I can offer anything for sale. As I'm not a paid member yet.

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Wed Nov 25, 2015 11:18 am

I was just wondering what you were expecing to pay to get them printed.

I think the top one is good if you want some red highlights, my VRX is black with some yellow. Is it bad to want the Mitsy logo in Yellow?

How did you come up with the shape for the cutout? I've done some graphics work, been trying to get back into it but it's tough without official qualifications.

FYI my spelling is just as bad, what is it with people doing work like this :lol:
Image
My rides CJ VRX - CC coupe

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Postby lancerdarryl » Wed Nov 25, 2015 12:27 pm

Don't forget to allow a hole for the light and wiper sensor. Looks great !
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"

User avatar
Damir
Lancer Ralliart
Lancer Ralliart
Posts: 589
Joined: Tue Apr 02, 2013 6:56 am
Location: Melbourne, Australia

Postby Damir » Wed Nov 25, 2015 12:32 pm

that is if you have auto wipers and lights
My Build Thread : http://clubcj.net/viewtopic.php?t=14731
ROTM Winner OCTOBER 2015 (Nominated for favourite CJ)
-Australia's first airbagged CJ-

User avatar
Kyrus
Lancer Legend
Lancer Legend
Posts: 1019
Joined: Wed Apr 06, 2011 8:36 pm
Location: Sydney, Australia

Postby Kyrus » Wed Nov 25, 2015 1:32 pm

ran one for about 2 years now, i quite like it, also its like a constant sun visor so it works quite well
燒

User avatar
skeg
Lancer Learner
Lancer Learner
Posts: 16
Joined: Tue Nov 17, 2015 11:13 pm
Location: Pakenham

Postby skeg » Wed Nov 25, 2015 1:40 pm

lancerdarryl wrote:Dont forget to allow a hole for the light and wiper sensor. Looks great !


Thanks for the tip. Didn't even think about that. I'll have to adjust it tonight when I get home.

Lancer1993 wrote:I was just wondering what you were expecing to pay to get them printed. I think the top one is good if you want some red highlights, my VRX is black with some yellow. Is it bad to want the Mitsy logo in Yellow? How did you come up with the shape for the cutout? Ive done some graphics work, been trying to get back into it but its tough without official qualifications. FYI my spelling is just as bad, what is it with people doing work like this :lol:


I'll get back to you once I know how much. ;) I would send you a Pm, but I haven't posted enough yet. Sorry. The shape I have just made up from taking a picture of the car and importing it into Corel. It'll change again though, as this is only temp.

Kyrus wrote:ran one for about 2 years now, i quite like it, also its like a constant sun visor so it works quite well


Good to know. ;) Certainly a plus. Do you have the official Mitsu one?

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Wed Nov 25, 2015 1:57 pm

Didn't think of a photo, guess another way is careful measurements. Most I've seen on eBay are just a basic rectangle so you fit them then trim the edge to match.

I know some printers here on the Sunshine coast but not sure is any do large form decals like this.
Image
My rides CJ VRX - CC coupe

User avatar
skeg
Lancer Learner
Lancer Learner
Posts: 16
Joined: Tue Nov 17, 2015 11:13 pm
Location: Pakenham

Postby skeg » Wed Nov 25, 2015 3:55 pm

Lancer1993 wrote:Didnt think of a photo, guess another way is careful measurements. Most Ive seen on eBay are just a basic rectangle so you fit them then trim the edge to match. I know some printers here on the Sunshine coast but not sure is any do large form decals like this.


I feel the best way to do it will be to either "smile" or "frown" the text to suit the curve. The straight basic rectangle ones online don't follow an even path on the decal/sticker. I hope to have this running even in the centre of the sticker. Trial and error, but I'll get there.

I have no issue with doing it print or cut. My old boss still does them for me. :)

User avatar
skeg
Lancer Learner
Lancer Learner
Posts: 16
Joined: Tue Nov 17, 2015 11:13 pm
Location: Pakenham

Postby skeg » Wed Nov 25, 2015 7:00 pm

Minor update - Spelling issue sorted. Mockups as below. :) Sorry for the crappy phone to computer screen. I'm too lazy.. haha.

Image

Image


Return to “Vinyls & Graphics”

Who is online

Users browsing this forum: No registered users and 23 guests