***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Windsceen Decal/Sticker - Thoughts?!?!

Vinyls, Decals & Graphic Ext/Interior Modifications.

Moderator: Senior Moderators

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Wed Nov 25, 2015 9:04 pm

I found a photo of a CJ windscreen online, more direct on to get a better idea of the dimensions needed.

Mocked up something myself this afternoon, still working on it.

Does Mitsubishi have an official font they use?
Image
My rides CJ VRX - CC coupe

User avatar
skeg
Lancer Learner
Lancer Learner
Posts: 16
Joined: Tue Nov 17, 2015 11:13 pm
Location: Pakenham

Postby skeg » Wed Nov 25, 2015 9:57 pm

Lancer1993 wrote:I found a photo of a CJ windscreen online, more direct on to get a better idea of the dimensions needed. Mocked up something myself this afternoon, still working on it. Does Mitsubishi have an official font they use?


Nice to hear man. Feel free to share. ;) I also have now designed the "right" cut to size. So hopefully it'll be a direct stick and no cutting involved. :)

I just looked up Mitsubishi font and found a free download. It had to be bastardised to get the current mitsu logo, but its a good base to start from.

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Wed Nov 25, 2015 10:16 pm

Tried it in a few colors and not finished with the art work or final curve.
Image

Also figured out if its less than 15cm tall it should avoid the sensors.

My only concern is how it will last with the wiper action?
Image
My rides CJ VRX - CC coupe

User avatar
Kyrus
Lancer Legend
Lancer Legend
Posts: 1019
Joined: Wed Apr 06, 2011 8:36 pm
Location: Sydney, Australia

Postby Kyrus » Wed Nov 25, 2015 10:58 pm

skeg wrote:Good to know. ;) Certainly a plus. Do you have the official Mitsu one?


nope, made it myself through viral vinyl in sydney. its on my other car
燒

User avatar
skeg
Lancer Learner
Lancer Learner
Posts: 16
Joined: Tue Nov 17, 2015 11:13 pm
Location: Pakenham

Postby skeg » Sat Nov 28, 2015 7:31 pm

Thought I would share what I've done while I still adjust artwork for the windscreen. This is hand knifed but I'll get it done by a plotter next week. Just a trial fit. ;) Thinking about doing something on the sides of the wing... but maybe too much..

Image

Image

Image

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Sat Nov 28, 2015 8:18 pm

Those cutouts cost around $35 on eBay, not sure of there quality.

Here is what I did with some plastic-dip last month.
Image

Doesn't stand out too much :)

I think it would be almost pointless doing it in black for me, even flat or carbon look unless it was yellow carbon.
Image
My rides CJ VRX - CC coupe

User avatar
skeg
Lancer Learner
Lancer Learner
Posts: 16
Joined: Tue Nov 17, 2015 11:13 pm
Location: Pakenham

Postby skeg » Sat Nov 28, 2015 8:32 pm

I've seen those ones on ebay.... thats what gave me the idea for the side bits. I'm no sucker... ;) wouldn't buy any stickers online, when I can design and get it cut myself. Hahaha

What I've attached pictures of have been hand cut from a 3M carbon look vinyl, not bought ebay ones. ;) Its all I had on hand, that was enough.

I'll end up getting these done in a gloss black I think, but I may get a set in matte/flat black also...

Plastidip looks mint though.. Good job man.. ;)

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Sat Nov 28, 2015 8:58 pm

I've got some black CF wrap but couldn't find a pattern to cut it out.
If I could I might get some in yellow and try that as I know the plasti-dip doesn't last that long.
Image
My rides CJ VRX - CC coupe

User avatar
Ray
Lancer Newbie
Lancer Newbie
Posts: 21
Joined: Thu Jan 28, 2016 7:29 am
Location: Mississauga, Canada
Contact:

Postby Ray » Sat Jan 30, 2016 8:05 pm

My 5Zigen racing team -decal for RearWindscreen -will complement my 5Zigen FN01R rims perfectly *eyebrows*
Image

no rice here~

User avatar
sarusa
Lancer Legend
Lancer Legend
Posts: 1287
Joined: Fri Sep 04, 2015 3:22 pm
Location: melbourne

Postby sarusa » Sun Apr 10, 2016 9:55 am

Mitsubishi should give these away free.

Great free advertising for them.

Placed under different item.

How the hell did it get here?

User avatar
sarusa
Lancer Legend
Lancer Legend
Posts: 1287
Joined: Fri Sep 04, 2015 3:22 pm
Location: melbourne

Re: Windsceen Decal/Sticker - Thoughts?!?!

Postby sarusa » Wed Jun 22, 2016 11:09 am

Not for me thanks!


Return to “Vinyls & Graphics”

Who is online

Users browsing this forum: No registered users and 27 guests