***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Door Pillar Carbon Wrap

Vinyls, Decals & Graphic Ext/Interior Modifications.

Moderator: Senior Moderators

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Door Pillar Carbon Wrap

Postby Lancer1993 » Sun Feb 08, 2015 5:41 pm

I'm looking at options to give my VRX a different look and saw these carbon wrap strips for the B pillar window frames.

http://www.ebay.com.au/itm/LANCER-EVO-C ... 3cba649368

But at $220 they are ridiculously expensive just to have 'Lancer' on them.
Has anyone tried making their own, what's the best approach. Make a template and precut or stick them on use a sharp knife to trim them off to fit?

Currently there is a small dent in the drivers B Pillar window frame so part of this is to cover it up, or make it less obvious. I was considering just painting that one after sanding and filling but thought some carbon wrap would be enough to hide the dent.

In the long run I want to add carbon wrap to other parts of my black VRX to break up the dark gloss color. Maybe even wrapping the bonnet, roof and boot.
Image
My rides CJ VRX - CC coupe

BenJ
Lancer Newbie
Lancer Newbie
Posts: 25
Joined: Mon Jan 26, 2015 10:46 am
Location: Australia

Postby BenJ » Sun Feb 08, 2015 5:51 pm

Wrapping it would be better,I all so have a black vr,in the process of doing black carbon fibre wrap on the silver interior bits on the dash and doors,black is a hard colour to work with,I would like to know what way u go and what u end up doing

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Sun Feb 08, 2015 6:14 pm

I might try the carbon wrap, I have some lying around and if it doesn't work I can alway paint it later.

Should I lay the carbon wrap under where the weather shields will be stuck down?
Image
My rides CJ VRX - CC coupe

Berek
Lancer ES/EX
Lancer ES/EX
Posts: 103
Joined: Tue Oct 28, 2014 10:15 pm
Location: Oz

Postby Berek » Sun Feb 08, 2015 7:52 pm

My vrx has old faded carbon trim so I ordered a set from the US for $40. Ofcourse they didn't fit when I got them... :evil: so I bought a big sheet of cf vinyl and I'll just cut it to shape. Haven't tried yet though.

BenJ
Lancer Newbie
Lancer Newbie
Posts: 25
Joined: Mon Jan 26, 2015 10:46 am
Location: Australia

Postby BenJ » Sun Feb 08, 2015 7:55 pm

If u could put contact on your books as a kid u will have no worries at all with it

Berek
Lancer ES/EX
Lancer ES/EX
Posts: 103
Joined: Tue Oct 28, 2014 10:15 pm
Location: Oz

Postby Berek » Sun Feb 08, 2015 8:01 pm

When I went to school we wrapped our books with brown paper :oops: :roll: Hadn't been invented back then :lol:

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Sun Feb 08, 2015 8:08 pm

Carbon fiber book covers, now there's an idea... wouldn't put it on the kids books as there would probably get bashed up on the way home LOL
Image
My rides CJ VRX - CC coupe

BenJ
Lancer Newbie
Lancer Newbie
Posts: 25
Joined: Mon Jan 26, 2015 10:46 am
Location: Australia

Postby BenJ » Sun Feb 08, 2015 8:15 pm

Lol but they would look apart

BenJ
Lancer Newbie
Lancer Newbie
Posts: 25
Joined: Mon Jan 26, 2015 10:46 am
Location: Australia

Postby BenJ » Sun Feb 08, 2015 8:20 pm

To get the best out come would be remove any thing around wear u want to wrap so u cover the hole area then when u put the parts back on there is no edge and u end up with a nice clean look

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Sun Feb 08, 2015 8:23 pm

The rubber the glass slides in should come out easy with the window down?
Image
My rides CJ VRX - CC coupe


Return to “Vinyls & Graphics”

Who is online

Users browsing this forum: No registered users and 25 guests