***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

removing rear discs

All Brake Modifications.

Moderator: Senior Moderators

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

removing rear discs

Postby aspir3 » Sun Dec 19, 2010 6:26 pm

Has any one removed their rear discs off their car.

I have tried but they seam stuck on. I have removed the wheels and calipers and the hand brake is loose.

I have looked at drawing but I can not see any thing that holds them on.

I would appreciate some advice before I attack them with a big soft hammer.

fazzle
Lancer Newbie
Lancer Newbie
Posts: 59
Joined: Thu Oct 07, 2010 5:57 pm
Location: Newcastle, Aus

Postby fazzle » Sun Dec 19, 2010 7:13 pm

i haven't done it on the new lancer, but the old one had 4 or 5 bolts behind the hub that held the whole disk and hub assembly onto the trailing arm. then you could separate the disc from the hub assembly.

i don't have any pics though.

maybe the new lancer is similar?

User avatar
extremepc
Lancer Newbie
Lancer Newbie
Posts: 30
Joined: Mon May 17, 2010 2:44 pm
Location: Sydney

Postby extremepc » Mon Dec 20, 2010 4:08 am

one belt with a rubber mallet will loosen up the disc, no need to pull the hub off. Had the same issue when I painted my calipers.

User avatar
SXy2010
Lancer ES/EX
Lancer ES/EX
Posts: 197
Joined: Sun Oct 24, 2010 9:34 pm
Location: woy woy nsw

Postby SXy2010 » Mon Dec 20, 2010 6:31 am

try a little rost off ice or similar around the hub and a few taps with soft hammer should just pop off
no turbo no awd but she's all white
dob 12/10/2010 at booths mitsubishi gosford
2 pipes are better than 1


Return to “Brakes”

Who is online

Users browsing this forum: No registered users and 10 guests