***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

How to get caliper bolts off?

All Brake Modifications.

Moderator: Senior Moderators

User avatar
ecl27
Lancer Newbie
Lancer Newbie
Posts: 83
Joined: Wed Aug 11, 2010 2:38 am
Location: Perth WA

How to get caliper bolts off?

Postby ecl27 » Fri Jul 18, 2014 4:57 am

Anyone have any tips on getting the caliper mounting bolts off? Just can't seem to get enough leverage to unbolt them.

User avatar
quachj
Lancer ES/EX
Lancer ES/EX
Posts: 117
Joined: Tue Oct 04, 2011 11:12 pm
Location: Springvale, Melbourne

Postby quachj » Fri Jul 18, 2014 5:03 am

torque wrench and wd-40 the crap out of it

himynameisdaniel
Lancer Evolution
Lancer Evolution
Posts: 824
Joined: Mon Feb 14, 2011 3:58 pm
Location: Adelaide

Postby himynameisdaniel » Fri Jul 18, 2014 5:14 am

If your rotors\pads have not been serviced since brand new. you will find that Mitsubishi has used a form of thread lock from factory. this will become evident when you finally take the bolt off you may see some dry red paste on the threads.

best thing is shop air.
otherwise you will need massive amounts of torque and penetrating oils.

I came pretty close to stripping a bolt. I thought I had it and then somehow went on a bit of an angle and whoops.

I'll replace it next time..

User avatar
lantourismo
Lancer Legend
Lancer Legend
Posts: 1248
Joined: Sat Apr 13, 2013 8:32 pm
Location: Perth, Australia

Postby lantourismo » Fri Jul 18, 2014 5:24 am

himynameisdaniel wrote:If your rotorspads have not been serviced since brand new. you will find that Mitsubishi has used a form of thread lock from factory. this will become evident when you finally take the bolt off you may see some dry red paste on the threads. best thing is shop air. otherwise you will need massive amounts of torque and penetrating oils. I came pretty close to stripping a bolt. I thought I had it and then somehow went on a bit of an angle and whoops. Ill replace it next time..


Thanks for that info It will come in handy

User avatar
zedd82
Lancer Evolution
Lancer Evolution
Posts: 892
Joined: Tue May 12, 2009 11:13 am
Location: Brisbane, QLD, Australia

Postby zedd82 » Fri Jul 18, 2014 6:22 am

A rattle gun is by far the easiest way to do it. Just make sure you have the air pressure set high enough when you're undoing the bolts.
Club CJ's fastest and most powerful Ralliart 349.8kw/ 469hp atw 12.068s 187km/h

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Fri Jul 18, 2014 7:53 am

don't use a torque wrench cause it will wreck it (not designed for removing bolts). If you don't have an air compressor then the Ryobi 1/2in rattle gun is the next best thing, or if you have the cash milwaukee.
Image

[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]

User avatar
ecl27
Lancer Newbie
Lancer Newbie
Posts: 83
Joined: Wed Aug 11, 2010 2:38 am
Location: Perth WA

Postby ecl27 » Fri Jul 18, 2014 4:00 pm

Thanks guy! I guess I'll hunt for a impact wrench then.


Return to “Brakes”

Who is online

Users browsing this forum: No registered users and 2 guests