***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Which Brake pads are better ?

All Brake Modifications.

Moderator: Senior Moderators

User avatar
billyboy
Lancer Evolution
Lancer Evolution
Posts: 778
Joined: Fri Feb 20, 2009 1:45 pm
Location: Sydney, Australia

Postby billyboy » Wed Oct 23, 2013 12:15 pm

BST50N wrote:I used QFM pads on my Chaser and bought a set to put on the Ralliart. Havent tried them on the RA yet but they worked very well on the Chaser. Noticable improvement in stopping. Cheap too, less than $100 for fronts. I think they are made in Aus. Bit dusty though.


Got these on my RA (fronts only) & pretty much agree with you for value / stopping power but I dont think they are too dusty, on par with OEM pads.

Though the drivers side one has developed a squeak when go up in temp, bit annoying!

User avatar
BST50N
Lancer Ralliart
Lancer Ralliart
Posts: 512
Joined: Wed Oct 17, 2012 7:24 pm
Location: Rydalmere

Postby BST50N » Wed Oct 23, 2013 12:37 pm

Maybe I noticed the dust more as my last wheels were white :lol:
MAP EF2 turbo , DW65 fuel pump, ID1000 injectors, EvoX FMIC, UR dump pipe, 100 cell cat, CP-E Exhaust, aFe air filter...and mud flaps!

User avatar
Craker
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 360
Joined: Sat Jun 02, 2012 9:56 pm
Location: Kings park sydney nsw

Postby Craker » Wed Oct 23, 2013 3:58 pm

billyboy wrote:[quote:3a37269068=BST50N]I used QFM pads on my Chaser and bought a set to put on the Ralliart. Havent tried them on the RA yet but they worked very well on the Chaser. Noticable improvement in stopping. Cheap too, less than $100 for fronts. I think they are made in Aus. Bit dusty though.[/quote:3a37269068] Got these on my RA (fronts only) & pretty much agree with you for value / stopping power but I dont think they are too dusty, on par with OEM pads. Though the drivers side one has developed a squeak when go up in temp, bit annoying!


Is that the hpx or a1rm qfms
2011 lancer ralliart sportback
192kw + 370nm at wheels virtual dyno by boostin juice tuning
Hyperflow intercooler, gfb respons bov , gs 3 port
ultimate racing uicp and licp, hyperflow cat back + hi flow cat
MCA blue coilovers and whiteline sway bars
T3 rotors and ds performance pads
enkei sc 22 wheels

User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Wed Oct 23, 2013 5:30 pm

So DBA rotors are pretty good ?
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85
FULL EVO X TURBO SETUP
APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |
TUNED BY BEEBLE | EXEDY H/D CLUTCH
BC RACING BR COILOVERS
Image

User avatar
chunky9
Lancer Evolution
Lancer Evolution
Posts: 821
Joined: Sun May 27, 2012 10:21 pm
Location: Sydney, New South Wales

Postby chunky9 » Wed Oct 23, 2013 5:37 pm

Yeah RDA is cheap ebay rubbish imo. DBA is the way to go

User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Wed Oct 23, 2013 5:42 pm

DAM! knew it haha

gonna do some sick research tonight !!!
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85

FULL EVO X TURBO SETUP

APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |

TUNED BY BEEBLE | EXEDY H/D CLUTCH

BC RACING BR COILOVERS

Image

User avatar
Sven247
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 357
Joined: Mon Oct 07, 2013 8:38 pm
Location: Sydney

Postby Sven247 » Wed Oct 23, 2013 7:03 pm

I had some Bendix pads in my Falcon, and they were Great!
cept in the morning they squeeked for about 5 seconds then stopped after I was Rolling :D
"Slaves Shall Serve"

"Honourary SA Member #2 "

User avatar
billyboy
Lancer Evolution
Lancer Evolution
Posts: 778
Joined: Fri Feb 20, 2009 1:45 pm
Location: Sydney, Australia

Postby billyboy » Wed Oct 23, 2013 8:38 pm

Craker wrote:g![/quote:32eedc3031] Is that the hpx or a1rm qfms


HPX mate

User avatar
SEB15
Lancer Evolution
Lancer Evolution
Posts: 931
Joined: Fri Aug 19, 2011 7:31 am
Location: Ipswich, QLD Australia

Postby SEB15 » Wed Oct 23, 2013 8:56 pm

i upgrade front on my ralliart with RDA rotors and brembo pads and so far is good when cold or hot, and WAY BETTER THAN STOCK!
Pads are a bit dusty tho, but i'm not worried about that
Maybe if this thread was coming before to purchase the rotors i was going with DBA, but so far i'm happy with the RDA's

User avatar
Craker
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 360
Joined: Sat Jun 02, 2012 9:56 pm
Location: Kings park sydney nsw

Postby Craker » Wed Oct 23, 2013 9:03 pm

denzza wrote:DAM! knew it haha gonna do some sick research tonight !!!


I have done heaps of research but you end up just as confused cause there are so many pads to choose all with big claims. Try sending gsl rally sport a pm they will give you some advice too.
2011 lancer ralliart sportback
192kw + 370nm at wheels virtual dyno by boostin juice tuning
Hyperflow intercooler, gfb respons bov , gs 3 port
ultimate racing uicp and licp, hyperflow cat back + hi flow cat
MCA blue coilovers and whiteline sway bars
T3 rotors and ds performance pads
enkei sc 22 wheels


Return to “Brakes”

Who is online

Users browsing this forum: No registered users and 28 guests