***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Ralliart brake ideas?

All Brake Modifications.

Moderator: Senior Moderators

User avatar
vermilioN
Lancer Ralliart
Lancer Ralliart
Posts: 632
Joined: Sat Jun 16, 2012 1:06 pm
Location: Adelaide

Ralliart brake ideas?

Postby vermilioN » Thu Jul 04, 2013 8:37 pm

Curious about upgrading my brakes with little cost.. I know this has been covered numerous times before. Is there any difference with aftermarket pads on the stock rotors or do you need to upgrade the rotors too? Will dot4 fluid make any difference also? What are your setups your running right now?
Image

Australia's sexiest blacked out ralliart ;)

evo x turbo, ets intercooler, turbosmart wga, aem intake, ur intercooler piping, ur turbo back exhaust, 3port

User avatar
SEB15
Lancer Evolution
Lancer Evolution
Posts: 931
Joined: Fri Aug 19, 2011 7:31 am
Location: Ipswich, QLD Australia

Postby SEB15 » Thu Jul 04, 2013 10:26 pm

i will keep an eye on this post, looking to upgrade my brakes as well! :)

User avatar
vermilioN
Lancer Ralliart
Lancer Ralliart
Posts: 632
Joined: Sat Jun 16, 2012 1:06 pm
Location: Adelaide

Postby vermilioN » Thu Jul 04, 2013 10:36 pm

I think I will just get the QFM HPX pads and be done with it.. I dont really want to spend much but it will be a while before I consider doing it anyways.. unless someone talks me out of it :P
Image



Australia's sexiest blacked out ralliart ;)



evo x turbo, ets intercooler, turbosmart wga, aem intake, ur intercooler piping, ur turbo back exhaust, 3port

User avatar
billy boy
Lancer Evolution
Lancer Evolution
Posts: 782
Joined: Sun Nov 22, 2009 5:10 pm
Location: Adelaide

Postby billy boy » Fri Jul 05, 2013 12:58 am

any upgrade is a step up from stock ;)
we are fascinated by that which can destroy us...

User avatar
Kal777
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 404
Joined: Mon May 21, 2012 9:48 pm
Location: Adelaide

Postby Kal777 » Fri Jul 05, 2013 8:10 am

Bendix Ultimate pads and replace all the brake fluid with Super Dot 4.

while the brake fluid does not directly increase braking power, it has a far higher boiling point than the stock Dot 3 fluid used in our cars. what this means is that when the brakes get hot the pressure from the fluid remains more consistent.

if your really wanting to increase braking performance slotted rotors are a good way to go.
Image
Injen Cold Air Intake/K&N Invert Pod/BC BR Coilovers/Whiteline Strut Brace/DrIft Blade seats/Penrite HPR5/Penrite ProGear/PBR Gold Dot

User avatar
sleeper
Alumni
Alumni
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Fri Jul 05, 2013 8:16 am

yeah, the better pads, HPX or better like REMSA and some dot4 600 fluid is all u need for anything but trackwork imo.
210 KWATW 400nm RALLIART Virtual Dyno 1/1
http://goo.gl/GrUosm


Image

User avatar
BST50N
Lancer Ralliart
Lancer Ralliart
Posts: 512
Joined: Wed Oct 17, 2012 7:24 pm
Location: Rydalmere

Postby BST50N » Thu Dec 05, 2013 3:57 pm

I need something too - my brakes were cooking after coming down Kangaroo Valley
MAP EF2 turbo , DW65 fuel pump, ID1000 injectors, EvoX FMIC, UR dump pipe, 100 cell cat, CP-E Exhaust, aFe air filter...and mud flaps!

User avatar
besty
Lancer Newbie
Lancer Newbie
Posts: 86
Joined: Fri Mar 29, 2013 11:48 am
Location: wollongong

Postby besty » Thu Dec 05, 2013 5:01 pm

yeah dude, mine wer fine... benefits of manual I guess.. haha

User avatar
Momengah
Lancer Ralliart
Lancer Ralliart
Posts: 714
Joined: Mon Nov 22, 2010 9:59 pm
Location: Melbourne, Australia

Postby Momengah » Thu Dec 05, 2013 5:52 pm

BST50N wrote:I need something too - my brakes were cooking after coming down Kangaroo Valley


Are you running stocks still?

I upgraded mine after a near collision with a truck pulling out in front of me going at 5km/h when i was going at 100km/h *&^# that was scary

Anyway I've upgraded all my to RDA slotted/dimpled rotors, EBC greenstuff pads, Braided lines as well as Penrite Racing brake fluid.

The Brake fluid has a higher boiling temp so makes it a bit better then other Dot 4 brake fluids from Penrite. The whole setup gives better pedal feel and i believe that stopping distance has shortened up as well. Definitely feels a lot better then stock thats for sure.
-Beeble spec custom tune (182kw 383nm)
-Cosworth Air Filter
-Evo X BOV
-Evo X Intercooler
-Grimmspeed 3 port
-Ultimate Racing UPICP & LICP
-HFC & Ultimate Racing catback

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Thu Dec 05, 2013 5:53 pm

Braided lines are good. Also depends on how much you willing to spend.
Image

[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]

User avatar
denzza
Lancer Legend
Lancer Legend
Posts: 1266
Joined: Sun Jul 15, 2012 11:27 pm
Location: Melbourne

Postby denzza » Thu Dec 05, 2013 5:57 pm

Well think of it this way...

You have really good pads, they you will chew out your rotors..
or vise versa.

Changing brake fluid , you wont feel anything. If you want to eliminate the spongy feel get BRAIDED BRAKE LINES. They are about $140 from memory for the fronts.

Now, Im running Project Mu Spec B pads.. $150.

And got DBA 4000 series T3 Rotors. $165 each. so $330 for fronts.

Thats as cheap as it gets.

It also depends how you drive, if you want pads for normal driving to and from work . and your pads are low. They just get OEM pads or something slightly higher.

But if you like to drive hard like myself. driving through hills, having a good BITE!, stopping earlier. Then you need rotors and pads thats have a high heat temperature.

Now, again if you go too high in temperature it will take longer for it to warm up adn longer for it to brake good. Hence why they use it in racing cause they are doing 200+ km/h. So yeah really from here its up to you.

Changing rotors and pads is easy. I wouldnt cheap out and get new ones. YOU WILL LOVE IT!

Im not a hoon or what ever. But ive tested my brakes and everything on the car. Speeds around 160-180km/h. Touch the peddle the slightest, pwoh it just stops with ease! even normal driving, stopping at the lights. You stop earlier :) BRAKES ARE IMPORTANT! You got the power, now stop that power hahah

Hope this helps man, if you need help just holla!
AUSTRALIA'S FIRST 4B11T ENGINE SWAP ON E85
FULL EVO X TURBO SETUP
APEXI ARC DESIGN INTAKE | RA BRAKE SETUP | APEXI N1 EVO -R 3" CAT BACK | UR CAT |
TUNED BY BEEBLE | EXEDY H/D CLUTCH
BC RACING BR COILOVERS
Image

User avatar
Craker
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 360
Joined: Sat Jun 02, 2012 9:56 pm
Location: Kings park sydney nsw

Postby Craker » Thu Dec 05, 2013 9:13 pm

I got dab 4000 t3 rotors and remsa pads after having rda slotted and red stuff pads and stock pads and rotors. So far the t3s on remsa pads seem a far superior combination. They last so much longer before they start to fade pushing downhill and braking hard than the rda rotors and stock setup. So much more confidence. Very dusty though.
2011 lancer ralliart sportback
192kw + 370nm at wheels virtual dyno by boostin juice tuning
Hyperflow intercooler, gfb respons bov , gs 3 port
ultimate racing uicp and licp, hyperflow cat back + hi flow cat
MCA blue coilovers and whiteline sway bars
T3 rotors and ds performance pads
enkei sc 22 wheels

User avatar
parralegend
Lancer ES/EX
Lancer ES/EX
Posts: 171
Joined: Sun Dec 28, 2008 8:00 pm
Location: Woonona

Postby parralegend » Fri Dec 06, 2013 11:32 am

Their is a bloke named Drew on clubralliart.com who designed a 6 pot brembo practically direct fitment kit. I'm considering this once I work out whether my 3rd set of vendor pad will fix my ongoing issues with the ssp/ape kit i received. He seems very knowledgeable though and pretty cheap considering what it is :).

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Fri Dec 06, 2013 12:03 pm

I just ended up using the Evo X Brembos on mine
Image



[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]

User avatar
parralegend
Lancer ES/EX
Lancer ES/EX
Posts: 171
Joined: Sun Dec 28, 2008 8:00 pm
Location: Woonona

Postby parralegend » Fri Dec 06, 2013 12:24 pm

Can you outline how it managed to fit up. I would have done this ages ago but heard the customisation was alot of work


Return to “Brakes”

Who is online

Users browsing this forum: No registered users and 3 guests