***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Rotors & Pads for 09 RX

All Brake Modifications.

Moderator: Senior Moderators

User avatar
amongor
Lancer Newbie
Lancer Newbie
Posts: 45
Joined: Tue Feb 12, 2013 1:29 pm
Location: Melbourne

Rotors & Pads for 09 RX

Postby amongor » Sun Apr 07, 2013 7:20 pm

As the title says Im looking for rotors and pads for my RX (essentially just an ES). After reading through this section a fair bit Ive decided to go with DBA rotors on recommendations from here and friends (who's opinion I greatly value), and I was also rather set on going with EBC redstuff pads.

So my questions really are which rotors should I go with? Ive read on here the 2201s for the fronts and 2209s for the rears, however (even if it is according to an ebay seller) I read they were for the VRX? So I just want to make sure they would still fit with my stock callipers/my car. I also read in one of the topics the 4417s? But I didnt read/cant remember which model they were for (if they are just a higher model rotor that will still fit I would consider forking out the extra cash for them). Then also if anyones got them, where did they purchase them from? Ebay the way to go? Or should I just hit up Pedders who apparently stock them/can get them in.

Same goes for the EBC's, just need to know where to get them from. If anyones got an eBay link that'd be maaad.

Cheers

User avatar
Momengah
Lancer Ralliart
Lancer Ralliart
Posts: 714
Joined: Mon Nov 22, 2010 9:59 pm
Location: Melbourne, Australia

Postby Momengah » Sun Apr 07, 2013 9:05 pm

GSL Rallysports is a club sponsor they can definitely help you out there. They're a very good place to start.

As for your choice of pads, I'm not sure that redstuff is the best pads. Not for normal street use on a Lancer anyway. here check this page out :) I found an EBC brakes guide to chose pads. Maybe Greenstuff is a better choice?

http://ebcbrakes.com/brakes-selector-chart/
-Beeble spec custom tune (182kw 383nm)
-Cosworth Air Filter
-Evo X BOV
-Evo X Intercooler
-Grimmspeed 3 port
-Ultimate Racing UPICP & LICP
-HFC & Ultimate Racing catback

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Sun Apr 07, 2013 9:09 pm

I bought my new pads from GSL Great place to buy from and they certainly look after you :-)

User avatar
darren1011
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 348
Joined: Sat Feb 11, 2012 10:48 am
Location: Wollongong, Australia

Postby darren1011 » Mon Apr 08, 2013 10:05 am

I just put a set of 2201 s on the front of my VR, also really a es. They are great, have QFM Hpx pads, no dust. Good pedal feel
http://www.ebay.com.au/itm/181086448370 ... 1439.l2649
These guys actually have them on the shelf, took me 14 months to find some

User avatar
amongor
Lancer Newbie
Lancer Newbie
Posts: 45
Joined: Tue Feb 12, 2013 1:29 pm
Location: Melbourne

Postby amongor » Mon Apr 08, 2013 10:24 am

So even though on that link it says their for the 2.4L that will still fit? THanks for the help as well guys Im in talks with GSL now as well. And Alex thanks for that chart maybe I will just go with the greenstuff
2009 2.0L RX Manual - Evo X Style Bodykit + Wing - Volk CE28N's - Varis Front Carbon Lip - Custom Axle Back Exhaust - DBA T2 Rotors - EBC Greenstuff Pads - Tein S Tech Springs

User avatar
darren1011
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 348
Joined: Sat Feb 11, 2012 10:48 am
Location: Wollongong, Australia

Postby darren1011 » Mon Apr 08, 2013 12:38 pm

amongor wrote:So even though on that link it says their for the 2.4L that will still fit? THanks for the help as well guys Im in talks with GSL now as well. And Alex thanks for that chart maybe I will just go with the greenstuff

They fit on my 2.0. On a CH there are 2 different rotors for 14 and15 in wheels, but it is the right part number and it will fit yr 2.0

User avatar
Dire
Post Monster
Post Monster
Posts: 3042
Joined: Tue Mar 09, 2010 6:38 pm
Location: Canning Vale (Perth)

Postby Dire » Mon Apr 08, 2013 2:25 pm

'VRX' brakes and 'ES' brakes are completely interchangable.
'VRX' have slightly bigger rotors. When I upgraded my brakes to 'VRX' brakes the calipers were SLIGHTLY different, but I still don't know if that was just a design update or what. They're the same size.

What kind of wheels do you have? Just be sure your new brakes fit under them.
'VRX' brakes fit under stock 16s though, so I highly doubt you'll have any trouble.

Are the 2201s VRX-spec? If so they'll fit fine. :)

User avatar
amongor
Lancer Newbie
Lancer Newbie
Posts: 45
Joined: Tue Feb 12, 2013 1:29 pm
Location: Melbourne

Postby amongor » Mon Apr 08, 2013 6:22 pm

Ive got a set of 18" PDW's on so that should be fine. And thanks, I just wanted to make sure they'd fit on a 2.0L lancer with me still keeping my stock callipers
2009 2.0L RX Manual - Evo X Style Bodykit + Wing - Volk CE28N's - Varis Front Carbon Lip - Custom Axle Back Exhaust - DBA T2 Rotors - EBC Greenstuff Pads - Tein S Tech Springs

User avatar
amongor
Lancer Newbie
Lancer Newbie
Posts: 45
Joined: Tue Feb 12, 2013 1:29 pm
Location: Melbourne

Postby amongor » Tue Apr 09, 2013 11:24 pm

So I've ordered my rotors which should be here in a couple of weeks (have to wait 2 weeks for the rears to get slotted) so thats mad, just now for pads. Does anyone else have more recommendations on pads?

QFM vs EBC ? or anyone tried the Ferodo pads advertised on DBA's website?
2009 2.0L RX Manual - Evo X Style Bodykit + Wing - Volk CE28N's - Varis Front Carbon Lip - Custom Axle Back Exhaust - DBA T2 Rotors - EBC Greenstuff Pads - Tein S Tech Springs


Return to “Brakes”

Who is online

Users browsing this forum: No registered users and 7 guests