***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Rotor upgrade/replacement

All Brake Modifications.

Moderator: Senior Moderators

User avatar
spunkybob
Lancer MASTER
Lancer MASTER
Posts: 1605
Joined: Thu Dec 04, 2008 11:36 am
Location: Kariong, NSW, Australia

Rotor upgrade/replacement

Postby spunkybob » Wed Mar 13, 2013 1:48 pm

Hi All,

My rotors need machining and I have already done it in the past so I am looking to replace them as the cost seems about the same.

I was wondering if either of these would be OK as I just drive on the road and sometimes the local national parks.

RDA Drilled/Slotted

or

DBA Standard

Thanks guys... :)
Image
>CLICK HERE to view My 08 Lancer in all its Glory!
"Its STILL happy go fun fun time!"

User avatar
rokpapaziz
Lancer Legend
Lancer Legend
Posts: 1344
Joined: Sat Aug 13, 2011 12:18 am
Location: Brisbane

Postby rokpapaziz » Wed Mar 13, 2013 2:01 pm

Ask GSL rallysport they're a club sponsor, replied my email very promptly

User avatar
twelve
Lancer Newbie
Lancer Newbie
Posts: 32
Joined: Mon Feb 25, 2013 7:40 pm
Location: Sydney

Postby twelve » Wed Mar 13, 2013 2:33 pm

Yep GSL are very good. I went with them for a brake upgrade for my XR5 last year.

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Wed Mar 13, 2013 5:04 pm

Gsl are brilliant i bought my pads from them

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Wed Mar 13, 2013 6:48 pm

Yeah get em from GSL

I got the HPX pads (whatever the arrangement of letters is) and the front slotted T2 rotors i think

Much better performance over stock. For Front and rear rotors and front and rear pads all up $450

Nice upgrade for the price. Rear rotors are just OEM replacements though...
Got a question? Read the ClubCJ Ultimate Guide First!!
Image
Just...Dont worry about it ;)Dont Click Me

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Wed Mar 13, 2013 6:51 pm

Same pattern that i am doing aswell tadz what are the t2's like cheers

User avatar
darren1011
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 348
Joined: Sat Feb 11, 2012 10:48 am
Location: Wollongong, Australia

Postby darren1011 » Fri Apr 05, 2013 9:29 am

Just upgraded to T2's, the pedal is much better and the quality of the rotor is obvious compared to the US ones I had on. Wait til i've got tehm bedded in but so far feel really good

User avatar
JaZira5
Lancer VR/GT
Lancer VR/GT
Posts: 213
Joined: Sat Mar 12, 2011 3:03 am
Location: Hawthorne, Queensland, Australia

Postby JaZira5 » Wed Apr 10, 2013 12:11 am

Hey Darren, what was the model number again for the rears? I remember we spoke about it before but I cant seem to find it.

Though, I went for it and got the DBA T2 rotors that you recommended me last time we spoke (same ones as yours). I couldn't help it. I hope the group buy doesn't go pay now too soon. LOL :P

Now I got to think about what pads to put in. :D

User avatar
darren1011
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 348
Joined: Sat Feb 11, 2012 10:48 am
Location: Wollongong, Australia

Postby darren1011 » Wed Apr 10, 2013 1:59 am

rears are 2209, good luck findong any. People advertise them but then if you ask if they're on the shelf you get double talk in reply, which means they don't but will take your money anyway. Since the rears only do 15% of the work, I'd tend to leave the stock rotors and upgrade the pads. I've been recommended Girling by a bloke I trust, inexpensive and good heat range

User avatar
JaZira5
Lancer VR/GT
Lancer VR/GT
Posts: 213
Joined: Sat Mar 12, 2011 3:03 am
Location: Hawthorne, Queensland, Australia

Postby JaZira5 » Sun Apr 14, 2013 5:41 pm

Thanks for the info Darren. Yeah, hard to come by that part number. Was thinking of keeping the rear stock, but upgrading the pads. I'm still deciding on what to get, so my fronts are just sitting on my bedroom floor. Pretty fast shipping from that ebay supplier.

But I don't think anything will be installed this month. With the service and birthdays. It's going to be tight. Plus still waiting on the cost of the sway bar group buy.

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Sun Apr 14, 2013 6:03 pm

The DBA T2Ts i cant wait till i get mine

And the pads i have atm but not on the car are QFM HPX Pads heard pretty good reviews on them. :-)

User avatar
JaZira5
Lancer VR/GT
Lancer VR/GT
Posts: 213
Joined: Sat Mar 12, 2011 3:03 am
Location: Hawthorne, Queensland, Australia

Postby JaZira5 » Sun Apr 14, 2013 6:58 pm

Mitch wrote:The DBA T2Ts i cant wait till i get mine And the pads i have atm but not on the car are QFM HPX Pads heard pretty good reviews on them. :-)


Hey mitch, what's the part number of those QFM HPX pads that you have for your ES?

User avatar
darren1011
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 348
Joined: Sat Feb 11, 2012 10:48 am
Location: Wollongong, Australia

Postby darren1011 » Mon Apr 15, 2013 12:22 am

I have the HPX pads, no dust, do the job, I'm not connvinced about them though long term, under heavy use I can smell them burning

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Mon Apr 15, 2013 12:37 am

JaZira5 wrote:[quote:a6dfd71e09=Mitch]The DBA T2Ts i cant wait till i get mine And the pads i have atm but not on the car are QFM HPX Pads heard pretty good reviews on them. :-)[/quote:a6dfd71e09] Hey mitch, whats the part number of those QFM HPX pads that you have for your ES?


QDB 1441
HP-X 3061

QDB 1686
HP-X 3104

User avatar
XXVENUMXX
Lancer ES/EX
Lancer ES/EX
Posts: 191
Joined: Sat Jun 16, 2012 7:10 pm
Location: Perth, Australia

Postby XXVENUMXX » Sun Apr 28, 2013 12:26 am

I work for clutch and brake australia here in wa my boss has a rexy with the t3 slotted rotors and the qfm hpx pads and hes throughly happy with them
Club CJ's Most Venumous Twin Zorst XR5 TURBO ;D
DIRE - 1-- VENUM - 0 ;)


Return to “Brakes”

Who is online

Users browsing this forum: No registered users and 27 guests