***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Ralliart parts.

Start a Topic! Have Your Say & Talk About Anything.

Moderators: Moderators, Senior Moderators

awood
Lancer VR/GT
Lancer VR/GT
Posts: 216
Joined: Tue Nov 03, 2020 4:45 pm
Location: Darwin

Ralliart parts.

Postby awood » Sun May 02, 2021 3:43 pm

A bloke is parting out his crashed Ralliart up here and I've managed to get the strut tower brace and snorkel for 100 beer tickets. Hopefully get them tomorrow if the public holiday allows.
Is there anything else I should be looking at to get?
I'd love the bonnet but it's munted from the front end crash.
I'll have a look over it tomorrow for any nice shiny aftermarket bits.

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Re: Ralliart parts.

Postby lancerdarryl » Sun May 02, 2021 5:54 pm

Rear spoiler it's the same as a VRX but it is a little taller than the base model one.
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Ralliart parts.

Postby bumblebee » Mon May 03, 2021 9:17 am

The front brake calipers are a nice upgrade and direct bolt up for the NA's
Will need RA rotor and pads, they are not too bad $$ wise
Depending on what interior you have there is a few bits around the Radio etc you could grab
If it has a dash mat or rear shelf mat , those will fit the NA

awood
Lancer VR/GT
Lancer VR/GT
Posts: 216
Joined: Tue Nov 03, 2020 4:45 pm
Location: Darwin

Re: Ralliart parts.

Postby awood » Mon May 03, 2021 10:00 am

Thanks mates , I'll look at those parts.

User avatar
Mars1811
Lancer VR/GT
Lancer VR/GT
Posts: 215
Joined: Thu May 21, 2020 10:51 am
Location: Melbourne

Re: Ralliart parts.

Postby Mars1811 » Mon May 03, 2021 9:15 pm

Get the gear knob if you've both got auto/manual, those are expensive online.
2011 VRX Sportback

Message me on Discord: Mars#0420
If in doubt, rev it out!

awood
Lancer VR/GT
Lancer VR/GT
Posts: 216
Joined: Tue Nov 03, 2020 4:45 pm
Location: Darwin

Re: Ralliart parts.

Postby awood » Tue May 04, 2021 6:20 pm

Well good news and bad , got the brace for fifty bucks but snorkel was absent . Must have been lost in the prang.
Interior bits were well and truly neglected and not worth salvaging , even the wheel was completely ruined.
Mars , the knob was there but is a different beast to my CVT trans'.
I'll fit the brace on the weekend and add some pic's.


Return to “General Talk”

Who is online

Users browsing this forum: No registered users and 79 guests