***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Brake pads for evo x??

Evo X Performance & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
gman90
Lancer VR/GT
Lancer VR/GT
Posts: 208
Joined: Fri Mar 04, 2011 9:03 pm

Brake pads for evo x??

Postby gman90 » Sun Dec 04, 2011 7:08 pm

Hi whats every one using?? looking for some fresh pads looking for some that is good for every day use that does very little squealing and of course very little dust any ideas and cost!!! Thanks Gazza :?:
Evolution X MR 712 GTP Turbo Upgrade. Pedders Sports Extrema Coil Overs, DBA 5000 Premium 2 piece Brake Rotors Front and Rear Rotors ,OME Black- Out Rear Taillights (Ralliart) Red Floor Illumination. White Line Centre Roll Adjust Kit.
Ecutek Custom Tune. 3in TurboXS. Turbo Back Exhaust.

gslrallysport
Club Sponsor
Club Sponsor
Posts: 143
Joined: Thu Jul 30, 2009 1:34 pm
Location: Brisbane, Australia

Postby gslrallysport » Tue Dec 06, 2011 3:15 pm

Hi mate,

We'd recommend QFM HPX, which are a Bendix Ultimate equivalent, but low dust and rotor wear. Fronts are $110, rears are $119, and plenty in stock. Shipping is free when you order front and rear pads together, or else $8 per axle set individually.

We do have a stack of other options in stock, but for high performance street use with low dust the HPX would be my pick.

Regards,
Greg
[center]GSL RallySport 1300 884 836
Sick of paying too much for performance brake pads? Want high performance with low rotor wear?
QFM Performance Pads[/center]

LaNcE
Lancer VR/GT
Lancer VR/GT
Posts: 219
Joined: Mon Jan 10, 2011 1:33 pm
Location: melbourne, victoria

Postby LaNcE » Tue Dec 06, 2011 10:01 pm

i suggest getting ferodo ds2500 thats the ones i got and lee! its really good with minimal brake dust i would say.

you can get it for about 270 usd delivered via map performance.

User avatar
McCoy
Lancer ES/EX
Lancer ES/EX
Posts: 179
Joined: Wed Dec 09, 2009 7:36 am
Location: Melbourne

Postby McCoy » Wed Dec 07, 2011 1:47 pm

Yup, DS2500's are a good thing.

John from V-sport up in Sydney was selling fronts for $259.
Dyno's

An invaluable tuning tool when used correctly
An invaluable sales tool when used incorrectly

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Wed Dec 07, 2011 3:41 pm

I run the model up from what Greg @ GSL suggested.

They are called the QFM A1RM. Bit dusty and can get a little squeaky, but I have never had them fail on either my lancer or the focus.

User avatar
gman90
Lancer VR/GT
Lancer VR/GT
Posts: 208
Joined: Fri Mar 04, 2011 9:03 pm

brakes

Postby gman90 » Sat Dec 10, 2011 6:39 pm

H,i so with my DBA Premium 2 piece Brake Rotors Front and rear would both the above options be OK should i get reasonable wear out of them Thanks gazza
Evolution X MR 712 GTP Turbo Upgrade. Pedders Sports Extrema Coil Overs, DBA 5000 Premium 2 piece Brake Rotors Front and Rear Rotors ,OME Black- Out Rear Taillights (Ralliart) Red Floor Illumination. White Line Centre Roll Adjust Kit.

Ecutek Custom Tune. 3in TurboXS. Turbo Back Exhaust.

User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Sat Dec 10, 2011 6:52 pm

DS2500 will be fine, and I run the A1RMs on DBA4000s, and they work well. DBAs are a fairly hard disc so tend to last better than RDA etc. I did run the A1RMs on RDA disks on the lancer and they worked well also....

User avatar
whitenight
Lancer Legend
Lancer Legend
Posts: 1433
Joined: Tue Aug 24, 2010 4:16 pm
Location: QLD

Postby whitenight » Wed Jul 04, 2012 7:22 pm

these are the stock evo x MR front rotors

Image
Last edited by whitenight on Fri Jul 13, 2012 9:18 pm, edited 1 time in total.

sanjeetsm
Lancer Newbie
Lancer Newbie
Posts: 21
Joined: Sun Jun 24, 2012 10:11 pm
Location: adelaide

Postby sanjeetsm » Sat Jul 07, 2012 3:01 pm

ken, those are rotors of an MR or gsr PP

User avatar
whitenight
Lancer Legend
Lancer Legend
Posts: 1433
Joined: Tue Aug 24, 2010 4:16 pm
Location: QLD

Postby whitenight » Sat Jul 07, 2012 3:04 pm

ok thanks sanjeet i will keep that in mind not ready to fit them yet.

User avatar
megatron
Lancer Legend
Lancer Legend
Posts: 1364
Joined: Tue Jun 08, 2010 9:56 pm
Location: Brendale

Postby megatron » Fri Jul 13, 2012 5:31 pm

red hats ken do it

User avatar
whitenight
Lancer Legend
Lancer Legend
Posts: 1433
Joined: Tue Aug 24, 2010 4:16 pm
Location: QLD

Postby whitenight » Fri Jul 13, 2012 6:57 pm

megatron wrote:red hats ken do it


HHmmmm i am warming to the idea might be to much red with the red brembo's

maybe anodized black hats with red anodized nutz


Return to “Evolution X Performance”

Who is online

Users browsing this forum: No registered users and 53 guests