***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

SST Fluid comparison - Results

Evo X Performance & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
El-Diablo
Lancer VR/GT
Lancer VR/GT
Posts: 279
Joined: Sun Sep 05, 2010 4:11 pm
Location: Melbourne, Australia

Postby El-Diablo » Fri Apr 04, 2014 11:42 pm

Some mre info on fluids

Note that Motul obviously does not believe that a high viscosity is required for a DCT, and they specifically mention the Nissan GT-R's GR6 transmission in their data sheet:
http://www.opieoils....arbox-fluid.pdf

The Motul DCTF data sheet also lists essentially all of the car manufacturer's DCT fluid brands & model numbers.


PROPERTIES
Color Visual Amber
Density at 20°C (68°F) -----------ASTM1298 -----------0.845
Viscosity at 40°C (104°F) -------ASTM D445 --------33.8 mm2/s
Viscosity at 100°C (212°F) -----ASTM D445 ----------7.3 mm2/s
Viscosity Index ASTM ------------D2270 -----------------189
Flash Point --------------------------ASTM D92 ------------196°C / 385°F
Pour Point ---------------------------ASTM D97----------- -45°C / -49°F

Also the DCT fluid for all Ferrari's is Shell TF DCT-3, and it has similar viscosity to the Motul and Pentosin FFL-4 (same as BMW DCTF-1)

http://www.maionesrl...c/tf dct-f3.pdf


Property Unit Typical Value Method
Kinematic Viscosity at 100 °C mm2/s ---------------6.4 --------------------DIN 51 562-1
Kinematic Viscosity at 40 °C mm2/s ---------------29.5 --------------------DIN 51 562-1
Viscosity Index - -------------------------------------------175 ---------------------DIN ISO 2909
Dynamic Viscosity at -40 °C mPa s ---------------9500 --------------------ASTM D 2983
Density at 15 °C kg/m3 ---------------------------------------------849 ---------------------DIN 51757
Flash Point °C ----------------------------------------------215 ---------------------DIN EN ISO 2592
Pour Point °C----------------------------------------------- -48 ----------------------DIN ISO 3016


and Pentosin FFL-4

http://www.pentosin....ento_FFL4_2.pdf

Product Attributes
Appearance -----------------------------Amber & Clear
Density at 15°C ------------------------842 kg/m³
Density at 20°C ------------------------839 kg/m³
Kinematic Viscosity at 100°C ---------7 mm²/s
Kinematic Viscosity at 40°C -------34.7 mm²/s
Kinematic Viscosity at 20°C -------83.9 mm²/s
Viscosity Index -------------------------168
Dynamic Viscosity at -40°C-------- 7400 mPa*s
Pour Point------------------------------ -54°C/-65.2°F
Flash Point -----------------------------220°C/428°F

and Castrol Transmax Dual

http://www.pentosin....ento_FFL4_2.pdf


Product Attributes
Appearance -----------------------------Amber
Density at 15°C ------------------------837.6 kg/m³
Kinematic Viscosity at 100°C ---------7.2 mm²/s
Kinematic Viscosity at 40°C -------35.5 mm²/s
Viscosity Index -------------------------168
Pour Point------------------------------ -72°C
Flash Point -----------------------------220°C/428°F

http://www.dctfacts....A-Lubrizol.aspx

http://www.dctfacts....lubricants.aspx

Check out Motul from us with filter for around 300 Bucks.

I am also looking at Fuchs titan DCTF will let everyone now prices when i do

User avatar
BST50N
Lancer Ralliart
Lancer Ralliart
Posts: 512
Joined: Wed Oct 17, 2012 7:24 pm
Location: Rydalmere

Postby BST50N » Thu Apr 17, 2014 7:02 pm

Hey guys, a bit of a small update - short on time lately.

I've just put up the FTIR traces for the Ford vs Diaqueen (repeat) and now for the Transmax vs Diaqueen. The difference this time is I've included the whole spectra, not just 2/3 of the range as before.

Diaqueen Vs Ford (Diaqueen in blue)
Image

Yep pretty close.

Diaqueen vs Transmax (Diaqueen in blue)
Image

Again, pretty bloody close. Don't worry too much about the peaks ~2300 - 2400 cm-1, thats just due to moisture in the air, and can change heaps depending on if you breathe on the instrument! There are a few small bumps between 1200 - 1000cm-1 for the Transmax, however I'm quite certain these are just due to a bit of isopropyl alcohol that I used to clean the crystal. The only difference I can see that sticks out is that the Ford and Castrol fluids seem to have some kind of weird transmittance at about 1600 - however I didn't see this last time in the tests so I'm going to assume its noise or an artifact.

So just backing up what I was saying before with some data. I'd be happy to say that according to THIS test, these things are essentially the same.

VISCOSITY

Ok so I tried to do this today. But I was just a bit too short with the Diaqueen, like 20ml :x Anyway I'm going to try it again next week with a different spindle and I might get a reading.

What I can tell you is that at ~70 deg C that the Ford and Diaqueen are quite close, roughly within 10% of each other. I got a very rough reading for the Diaqueen that was around the same as the others, but I'm not going to stand by that as the test wasn't quite right. Stay tuned, I'll have another crack next week 8)
MAP EF2 turbo , DW65 fuel pump, ID1000 injectors, EvoX FMIC, UR dump pipe, 100 cell cat, CP-E Exhaust, aFe air filter...and mud flaps!

User avatar
Beeble
Lancer Ralliart
Lancer Ralliart
Posts: 609
Joined: Thu Jan 27, 2011 11:20 pm
Location: Melbourne, Australia
Contact:

Postby Beeble » Thu Apr 17, 2014 7:17 pm

Thanks Nick!!
****************************
Modding or Tuning questions for your Lancer, RA or EVO? drop me a line!
http://BeebleTune.com

User avatar
gman90
Lancer VR/GT
Lancer VR/GT
Posts: 208
Joined: Fri Mar 04, 2011 9:03 pm

Postby gman90 » Fri Apr 18, 2014 1:26 pm

Hi, good stuff Nick ,So from what you saying we can take a guess and say that the ford stuff the diaqeen and the transmax are all pretty much the same Gazza
Evolution X MR 712 GTP Turbo Upgrade. Pedders Sports Extrema Coil Overs, DBA 5000 Premium 2 piece Brake Rotors Front and Rear Rotors ,OME Black- Out Rear Taillights (Ralliart) Red Floor Illumination. White Line Centre Roll Adjust Kit.
Ecutek Custom Tune. 3in TurboXS. Turbo Back Exhaust.

User avatar
BST50N
Lancer Ralliart
Lancer Ralliart
Posts: 512
Joined: Wed Oct 17, 2012 7:24 pm
Location: Rydalmere

Postby BST50N » Fri Apr 18, 2014 5:46 pm

gman90 wrote:Hi, good stuff Nick ,So from what you saying we can take a guess and say that the ford stuff the diaqeen and the transmax are all pretty much the same Gazza


I'd say pretty similar! As I said there was a slight difference in viscosity @ 70 deg C - about 10% or so. It may be within the error range of the machine as it's reading quite low numbers. I'll try and repeat again next week and see what I get.
MAP EF2 turbo , DW65 fuel pump, ID1000 injectors, EvoX FMIC, UR dump pipe, 100 cell cat, CP-E Exhaust, aFe air filter...and mud flaps!

User avatar
BST50N
Lancer Ralliart
Lancer Ralliart
Posts: 512
Joined: Wed Oct 17, 2012 7:24 pm
Location: Rydalmere

Postby BST50N » Tue Apr 22, 2014 11:04 am

Update - well sorry guys, I tried to do the viscosity measurement again, but I just don't have enough Diaqueen to get an accurate reading. These are all quite low viscosities at 80 deg, so I have to use the largest spindle, but because of this I don't have enough fluid :( As I said last week, the viscosities look similar, but I can't get an accurate enough reading that I'm happy to post, so its going to be a case of use your own judgement.
MAP EF2 turbo , DW65 fuel pump, ID1000 injectors, EvoX FMIC, UR dump pipe, 100 cell cat, CP-E Exhaust, aFe air filter...and mud flaps!

User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Postby R4LLI4RT » Tue Apr 22, 2014 11:15 am

thanks for the update nick

i cant get a hold of someone to do a trade quote for the transmax dual, i only could get access to trade at bursons and they dont deal with castrol anymore. :-(

fair to say ford fluid is the best alternative if your willing to not use oem stuff and not to forget the ford transmission is made by the same company as mitsu so dont see why their fluid wouldnt do the same thing as the mitsu one.
3Inch Custom Cat Back Exhaust
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster) ;-)

User avatar
Craker
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 360
Joined: Sat Jun 02, 2012 9:56 pm
Location: Kings park sydney nsw

Postby Craker » Wed May 07, 2014 10:52 pm

http://www.willallracing.com.au/lubricants.htm#evotrans

Saw this just browsing online. $600 for ten litres so no cheaper than diaqeen really.
2011 lancer ralliart sportback
192kw + 370nm at wheels virtual dyno by boostin juice tuning
Hyperflow intercooler, gfb respons bov , gs 3 port
ultimate racing uicp and licp, hyperflow cat back + hi flow cat
MCA blue coilovers and whiteline sway bars
T3 rotors and ds performance pads
enkei sc 22 wheels

User avatar
black_ice
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 365
Joined: Sun Feb 24, 2013 4:13 pm
Location: NSW

Postby black_ice » Thu May 08, 2014 9:21 am

^ you want to stay away from that!!
Saying a car is for going form A to B is like saying sex is for reproduction!

User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Postby R4LLI4RT » Thu May 08, 2014 11:15 am

Why Aamir, what have you heard about it??
3Inch Custom Cat Back Exhaust

Home Brand Alloy UICP

DBA Slotted and Drilled Rotors

K&N Panel Filter Replacement

DBA Extreme Pads

Turbosmart Dual Port BOV

Tein S Tech Springs

Painted Calipers (Makes it look faster) ;-)

User avatar
black_ice
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 365
Joined: Sun Feb 24, 2013 4:13 pm
Location: NSW

Postby black_ice » Thu May 08, 2014 1:58 pm

I remember reading somewhere (EvoOz maybe) that some people have used it with not very good results and they recommended to stay away from it. I'll try to see if I can find the article.

Here is one thread from EvoX forums: http://www.evoxforums.com/forums/archiv ... -8960.html

But this is not the one I have read..the one I have read was the person who actually used the Willall fluid giving his feedback which was not good at all..I cant remember the specifics but I remember thinking that I would not use it.

Hope this helps!
Saying a car is for going form A to B is like saying sex is for reproduction!

User avatar
BST50N
Lancer Ralliart
Lancer Ralliart
Posts: 512
Joined: Wed Oct 17, 2012 7:24 pm
Location: Rydalmere

Postby BST50N » Wed May 14, 2014 10:59 am

Ok guys so I finally got a bit more info. This will probably be the last lot of testing I can do, as I've taken on a new position and won't be doing much in the lab anymore :(


Viscosity

Ok so this is how it happened. I tried to get viscosity at 80 deg C but found out I didn't have enough to use the large (more accurate) spindle. I put these 4 oils in an oven at 100 deg C over the weekend. I did notice some dis-colouration of the oils after this period. Have the oils degraded, or the colourant? No idea. My failed thermal analysis told me that the oils dont really break up until something like 150 deg, but thats pretty serious degradation at that temp.

Anyway all oils were heated for same amount of time, at same temp. I guess you could consider this a sort of test that shows how they hold up after a bit of abuse. All oils were tested at 21 deg C, so not operating temp, but again its comparative. Results are in centipoise, and I'd say +- 10%.

Diaqueen = 70
Ford = 70
Transmax = 75
HKS = 70

So what does this tell us? That the viscosity of each oil is basically the same. While the Transmax appears slightly higher, its probably within the margin of error.


Density

I only got the 3 oils suspected of being the same here.

Diaqueen = 8.30g/cm3
Ford = 8.34g/cm3
Transmax = 8.44g/cm3

There is only a couple of % difference here. The slightly higher density of the Transmax may explain the slightly higher viscosity.

So in summing up -

FTIR shows Diaqueen, Ford and Transmax appear to have an almost identical chemical makeup. Viscosity of each is very similar, as is density. I'll leave that up to everyone's own discretion what they do with the info.
Last edited by BST50N on Wed Aug 26, 2015 8:34 am, edited 1 time in total.
MAP EF2 turbo , DW65 fuel pump, ID1000 injectors, EvoX FMIC, UR dump pipe, 100 cell cat, CP-E Exhaust, aFe air filter...and mud flaps!

User avatar
megatron
Lancer Legend
Lancer Legend
Posts: 1364
Joined: Tue Jun 08, 2010 9:56 pm
Location: Brendale

Postby megatron » Wed May 14, 2014 11:04 am

excellent work, I have 20L of transmax waiting to be opened

User avatar
squala
Post Monster
Post Monster
Posts: 2869
Joined: Wed Jun 03, 2009 12:23 am
Location: Fines City, VIC, Australia

Postby squala » Wed May 14, 2014 11:30 am

I'll probably stick with Diaqueen for the first fluid change in the interest of keeping the warranty, but won't hesitate with Ford, Transmax or HKS when it's finished.
///// /////
7 airbags
6-speed SST
5-star safety
4-wheel drive
3-diamond badge
2 overhead cams
1 awesome ride
0 demerit points and gutter rash


Image

User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Postby R4LLI4RT » Wed May 14, 2014 11:34 am

Excellent thread and research Nick.

I think it all goes to show that if your willing to not use the oem stuff then there are some other quality products on the market that are cheaper.
3Inch Custom Cat Back Exhaust

Home Brand Alloy UICP

DBA Slotted and Drilled Rotors

K&N Panel Filter Replacement

DBA Extreme Pads

Turbosmart Dual Port BOV

Tein S Tech Springs

Painted Calipers (Makes it look faster) ;-)


Return to “Evolution X Performance”

Who is online

Users browsing this forum: No registered users and 30 guests