***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

options on sst oil change???

Evo X Performance & Modifications.

Moderators: Moderators, Senior Moderators

User avatar
chris
Lancer ES/EX
Lancer ES/EX
Posts: 194
Joined: Sun May 03, 2009 1:14 pm

Postby chris » Tue Jan 28, 2014 8:50 pm

Flushing is a waste of time and oil.

User avatar
BST50N
Lancer Ralliart
Lancer Ralliart
Posts: 512
Joined: Wed Oct 17, 2012 7:24 pm
Location: Rydalmere

Postby BST50N » Tue Jan 28, 2014 9:14 pm

Black_Art wrote:I got a bottle of the liqui moly dct fluid that i dont need if your interested in testing it


Sure thing mate, if you can send me 100ml or so I'll add it to the collection.
MAP EF2 turbo , DW65 fuel pump, ID1000 injectors, EvoX FMIC, UR dump pipe, 100 cell cat, CP-E Exhaust, aFe air filter...and mud flaps!

User avatar
gman90
Lancer VR/GT
Lancer VR/GT
Posts: 208
Joined: Fri Mar 04, 2011 9:03 pm

Postby gman90 » Tue Jan 28, 2014 9:25 pm

Hi not going with (mineral oil flush out) just drain oil and cooler i read about putting in to each gear after refilling, but have not heard about the 20 second thing?????? Gary




Are you following the guide(s) that says to flush with mineral oil, or the guide(s) that says to lift all 4 wheels off the ground, sgift into each of the gears for 20 seconds when draining?!

It wasn't anywhere close to 7.5l for me, (a little over 6.5l came out of mine).

18lb/ft torque each of the hex nuts (drain & fill bolts) on the SST. Just about the only bolts on my car that's torqued correctly - everything else was extra tightened by the dealer on prev occasions.
Evolution X MR 712 GTP Turbo Upgrade. Pedders Sports Extrema Coil Overs, DBA 5000 Premium 2 piece Brake Rotors Front and Rear Rotors ,OME Black- Out Rear Taillights (Ralliart) Red Floor Illumination. White Line Centre Roll Adjust Kit.
Ecutek Custom Tune. 3in TurboXS. Turbo Back Exhaust.

User avatar
BST50N
Lancer Ralliart
Lancer Ralliart
Posts: 512
Joined: Wed Oct 17, 2012 7:24 pm
Location: Rydalmere

Postby BST50N » Mon Feb 03, 2014 1:58 pm

Ok peoples! First sample has been tested! Big thank you to Don (Black_art) for sending the Liqui Moly!

When I get the other samples to compare with I'll make up a dedicated thread and put it as a sticky.
MAP EF2 turbo , DW65 fuel pump, ID1000 injectors, EvoX FMIC, UR dump pipe, 100 cell cat, CP-E Exhaust, aFe air filter...and mud flaps!

User avatar
R4LLI4RT
Lancer Legend
Lancer Legend
Posts: 1202
Joined: Sun Jan 03, 2010 12:32 pm
Location: Melbourne, Australia

Postby R4LLI4RT » Mon Feb 03, 2014 2:55 pm

sweet, i did hear a member here used it but he sold the car so we dont know how it would of been long term
3Inch Custom Cat Back Exhaust
Home Brand Alloy UICP
DBA Slotted and Drilled Rotors
K&N Panel Filter Replacement
DBA Extreme Pads
Turbosmart Dual Port BOV
Tein S Tech Springs
Painted Calipers (Makes it look faster) ;-)

User avatar
BST50N
Lancer Ralliart
Lancer Ralliart
Posts: 512
Joined: Wed Oct 17, 2012 7:24 pm
Location: Rydalmere

Postby BST50N » Mon Feb 03, 2014 5:46 pm

R4LLI4RT wrote:sweet, i did hear a member here used it but he sold the car so we dont know how it would of been long term


Yeah was probably Black_Art as he sent it to me because he didn't need it anymore
MAP EF2 turbo , DW65 fuel pump, ID1000 injectors, EvoX FMIC, UR dump pipe, 100 cell cat, CP-E Exhaust, aFe air filter...and mud flaps!

User avatar
BST50N
Lancer Ralliart
Lancer Ralliart
Posts: 512
Joined: Wed Oct 17, 2012 7:24 pm
Location: Rydalmere

Postby BST50N » Tue Feb 04, 2014 1:34 pm

Ford fluid on the way from Gary (gman90)! Thanks Gary!
MAP EF2 turbo , DW65 fuel pump, ID1000 injectors, EvoX FMIC, UR dump pipe, 100 cell cat, CP-E Exhaust, aFe air filter...and mud flaps!

User avatar
Beeble
Lancer Ralliart
Lancer Ralliart
Posts: 609
Joined: Thu Jan 27, 2011 11:20 pm
Location: Melbourne, Australia
Contact:

Postby Beeble » Tue Feb 04, 2014 4:01 pm

and OEM and Martini on it's way from me :)

martini fluid actually is yellow... a lot like pentosin. Hrmmmm... I need to have some sitting next to each other to confirm.
****************************
Modding or Tuning questions for your Lancer, RA or EVO? drop me a line!
http://BeebleTune.com

User avatar
poe_sniper
Lancer VR/GT
Lancer VR/GT
Posts: 291
Joined: Mon Jan 30, 2012 4:30 pm
Location: Glen Oak

Postby poe_sniper » Tue Feb 04, 2014 8:46 pm

Sent off the HKS DCTF-I today via Parcel Post :D
Image

User avatar
Beeble
Lancer Ralliart
Lancer Ralliart
Posts: 609
Joined: Thu Jan 27, 2011 11:20 pm
Location: Melbourne, Australia
Contact:

Postby Beeble » Tue Feb 04, 2014 8:53 pm

^^ what colour is it Jarryd?
****************************

Modding or Tuning questions for your Lancer, RA or EVO? drop me a line!

http://BeebleTune.com

User avatar
poe_sniper
Lancer VR/GT
Lancer VR/GT
Posts: 291
Joined: Mon Jan 30, 2012 4:30 pm
Location: Glen Oak

Postby poe_sniper » Wed Feb 05, 2014 7:05 am

Beeble wrote:^^ what colour is it Jarryd?


It's green.

See the bottom of this page:
http://www.hks-power.co.jp/en/product/o ... index.html
Image

User avatar
BST50N
Lancer Ralliart
Lancer Ralliart
Posts: 512
Joined: Wed Oct 17, 2012 7:24 pm
Location: Rydalmere

Postby BST50N » Wed Feb 05, 2014 7:20 am

Beeble wrote:and OEM and Martini on its way from me :) martini fluid actually is yellow... a lot like pentosin. Hrmmmm... I need to have some sitting next to each other to confirm.


Thanks Adam, will let you know when it arrives.

poe_sniper wrote:Sent off the HKS DCTF-I today via Parcel Post :D


Thanks Jarryd!

Black_Art wrote:Yeah it was me who sent the liqui moly How long do you think it will be before you get the results or is this just a test for similarities between them,like temp range and viscosity and stuff like that. Keen to see how close most of them are,would save alot of people money and worry.


Not sure how long until I have results, depends on when samples turn up, how busy I am at work etc. This is a comparative test only. I don't work in an oil testing lab, so I don't have a lot of the specialized equipment to measure things like friction reduction etc.

I have access to equipment that I can used to determine a number of physical properties, and some chemical properties. So by comparing all the other samples to the Diaqueen, we should be able to get a pretty accurate idea how similar the others are. I'm 99% certain that if 2 samples are the same, I'll be able to prove it :D
MAP EF2 turbo , DW65 fuel pump, ID1000 injectors, EvoX FMIC, UR dump pipe, 100 cell cat, CP-E Exhaust, aFe air filter...and mud flaps!

User avatar
Beeble
Lancer Ralliart
Lancer Ralliart
Posts: 609
Joined: Thu Jan 27, 2011 11:20 pm
Location: Melbourne, Australia
Contact:

Postby Beeble » Wed Feb 05, 2014 8:12 am

so right now we have :
OEM - green
LiquiMoly - ??
HKS - green
Martini - yellow/golden
Ford - ?green?

We know pentosin FFL-2 and SSP Gold are, erm Gold. it makes me wonder somewhat about the Martini stuff aswell :) be keen to see them side by side in the same jars.

Ford we strongly suspect is BOT fluid from Castrol. which we also strongly suspect is Castrol Transmax Dual.

Dodson also market an SST fluid and i'm trying to get specs and/or info on it at the moment
****************************

Modding or Tuning questions for your Lancer, RA or EVO? drop me a line!

http://BeebleTune.com

User avatar
BST50N
Lancer Ralliart
Lancer Ralliart
Posts: 512
Joined: Wed Oct 17, 2012 7:24 pm
Location: Rydalmere

Postby BST50N » Wed Feb 05, 2014 8:21 am

LiquiMoly is a light brown sort of colour. Similar to engine oil I guess.

I'll get a photo of all the oils side by side when I receive them.
MAP EF2 turbo , DW65 fuel pump, ID1000 injectors, EvoX FMIC, UR dump pipe, 100 cell cat, CP-E Exhaust, aFe air filter...and mud flaps!


Return to “Evolution X Performance”

Who is online

Users browsing this forum: No registered users and 13 guests