Turbo Kit for 4B11 CJ Lancer
Posted: Tue Oct 14, 2008 12:23 pm
I Found this Turbo Kit for the CJ 4B11, here is the link http://www.roadracemotorsports.com/stor ... cts_id=286
ClubCJ - The CJ Lancer Club
Turbo Kit for 4B11 CJ Lancer
Page 1 of 3
Posted: Tue Oct 14, 2008 1:01 pm
Yep been out for a while now. They have both CVT and M/T kits
Posted: Tue Oct 14, 2008 9:13 pm
Now, this is on the wish list.....
Posted: Wed Oct 15, 2008 1:36 am
Yeah! but who will be the First to get it!!!XxLaNcErGTSxX wrote:Yep been out for a while now. They have both CVT and M/T kits
Posted: Sun Nov 09, 2008 1:33 pm
thats what i'm waiting for. someone to buy and actually drive it for a while. i really dont want to void my warranty.
Posted: Thu Dec 04, 2008 5:43 pm
lol, i asked my local mitso dealer about turbo.... he just shook his head and said no.
Posted: Fri Dec 05, 2008 1:21 am
Lol true. But yes this car needs a turbo 
Posted: Fri Dec 05, 2008 8:52 am
I read somewhere that the turbo is too powerful for the standard engine. You need to do some mods to the block etc as it is rated at 40% more than what the engine can handle as stock standard.
Posted: Fri Dec 05, 2008 12:06 pm
lol he said i can do whatever i want, just that turbo is affecting the normal performance of the engine, IE doing what it was not designed to do
Posted: Fri Dec 05, 2008 2:42 pm
Not really hey. With that turbo kit, u can run at 0.4 - 0.6 bar boost without problems on the 4B11. However if u want more boost u will need to upgrade the internals. Its like any turbo. Even a tiny little turbo can blow an engine if the bar is set too high for what the engine can take at the moment.
Posted: Wed Dec 10, 2008 11:31 am
i agree with maverik... here at the states they say that you can maybe run it at 8lbs of boost as a daily driver... if you want more boost then you would have to change all internals.
Posted: Wed Dec 10, 2008 12:08 pm
well, internals are available from XtremeBoost. Forged Conrods, Pistons, and crankshafts...
Posted: Wed Dec 10, 2008 7:37 pm
Phoenix wrote:well, internals are available from XtremeBoost. Forged Conrods, Pistons, and crankshafts...
do u know the full price for this turbo kit with internals ??
Posted: Wed Dec 10, 2008 8:04 pm
i'll say budget out about AUD$10 - $12K at least. this will make room for your turbo + safety electronics + install + tune + brakes + RTA certification, AND... any mishaps...
but in the end, you'll have something that would eat a RA in a straight line... but of course, you'll die in corners...
PS: minus out $1 - $1.8K from my estimate if you're installing the kit and brakes yourself.
PS2: Frank is also selling custom forged internals, such as conrods, pistons, and crankshafts... that would allow you to up the boost to around 14 - 16psi... or higher...
but in the end, you'll have something that would eat a RA in a straight line... but of course, you'll die in corners...
PS: minus out $1 - $1.8K from my estimate if you're installing the kit and brakes yourself.
PS2: Frank is also selling custom forged internals, such as conrods, pistons, and crankshafts... that would allow you to up the boost to around 14 - 16psi... or higher...