***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

*CLOSED* Whiteline Sway Bars Group Buy

For all ClubCJ Members.

Moderator: Senior Moderators

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

*CLOSED* Whiteline Sway Bars Group Buy

Postby SIR-VRX » Tue Jan 05, 2010 5:30 pm

Ok, so we know we have now got Whiteline Swaybars for our CJs . See this thread.

In negotiation with my local Repco (my Dad and mate work for Repco) we can do a group buy to get a discount for everybody who is interested. We will need a minimum of 5 bars to make it possible, but the more we get it the better the discount.

The part numbers are below:

(Note: The prices you will pay will be cheaper than RRP, but these don't include postage from Brisbane to you (neither does the Whiteline RRP). But postage is not dear domestically.)

-----------------

Image

**********
Order List:

1. SIR-VRX - BMF56XZ + BMR86XZ = $425 PAID
2. [s]Tadz0rz - Please Confirm Choice[/s]
3. tjoz - BMF56XZ = $225
4. hecky - BMF56XZ + BMR85XZ = $450 PAID
5. Mizta B - BMF56XZ + BMR86XZ = $425 PAID
6. SPRKLS - BMF56XZ + BMR86XZ = $425 PAID
7. Lethal_1 - BMF56XZ + BMR85XZ = $450 PAID
8. tryg - BMF56XZ + BMR86XZ = $425 PAID
9. [s]arutha - BMF55Z + BMR84Z = $400[/s]
10. driftnut(( - BMF56XZ + [s]BMR86XZ[/s] = $225
11. scraverX - BMF56Z + BMR86Z = $425 PAID
12. Billyboy - BMF56Z + BMR85Z = $450 PAID
13. Brimstone103 - BMR86Z = $200 PAID
14. zedd82 - BMF56XZ + BMR85XZ = $450 PAID
15. BeHaV3 - BMF56XZ + BMR85XZ = $450 PAID
16. Matzilla - BMF56XZ + BMR86XZ = $425 PAID
17. spareparts - BMF56XZ + BMR85XZ = $450 PAID
18. lzy_eye - BMF56XZ + BMR86XZ = $425 PAID
19. vincentchua - BMF56XZ + BMR85XZ = $450
20. vi93r - BMF56XZ + BMR86XZ = $425 PAID
21. ofey - BMF56XZ = $225 PAID

Please confirm your orders and pay now! PM me after you have checked your order!

Everybody regardless of location (within Australia only) will pay the same amount. This will include shipping to the state Senior Moderator or in the case of only one buyer in a particular state, that person. NSW wil be personally colected by either lzy_eye or MiztaB from the future Coffs Harbour Meet. Or if that fails to go ahead, lzy_eye and myself will meet up there anyway for the hell of it!

That is in accordance with the new group buy procedure. To make it fair on everybody.

We need to get orders and money in ASAP, as I need the money upfront to order, and there is a 3 week wait for the order, according to Whiteline. If there are those that can not do this straight away, let me know and we might be able to work out something for you (I know there are a few who asked for February)
Last edited by SIR-VRX on Thu Jan 21, 2010 12:42 am, edited 24 times in total.

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Tue Jan 05, 2010 5:34 pm

Any idea when this will be finalised? When at least 5 EOI's come in yes?

Might be interested depending on how much money i have left over from paying my excess....
Got a question? Read the ClubCJ Ultimate Guide First!!
Image
Just...Dont worry about it ;)Dont Click Me

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Tue Jan 05, 2010 5:36 pm

It probably won't happen until February, due to the stock of Whiteline being so low at the moment.

User avatar
PYLee
Lancer MASTER
Lancer MASTER
Posts: 1808
Joined: Wed Aug 05, 2009 1:29 am
Location: Melbourne, VIC

Postby PYLee » Tue Jan 05, 2010 5:37 pm

yo adrian , ur order seems to be wrong , your ordering two front bars ?

1. SIR-VRX - BMF56Z & BMF56XZ <<<< Rear suppose to be 86
Lancer Evolution 10MR

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Tue Jan 05, 2010 5:38 pm

:oops:

Damn typos!!

Thanks mate! haha

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Tue Jan 05, 2010 5:40 pm

Put me as an EOI but i will confirm at a later stage....After excess is paid =)
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me

User avatar
PYLee
Lancer MASTER
Lancer MASTER
Posts: 1808
Joined: Wed Aug 05, 2009 1:29 am
Location: Melbourne, VIC

Postby PYLee » Tue Jan 05, 2010 5:40 pm

hehe no worries mate , was just looking at those model numbers to see the difference
Lancer Evolution 10MR

User avatar
BeHaV3
Lancer Ralliart
Lancer Ralliart
Posts: 612
Joined: Fri Jan 09, 2009 4:59 pm
Location: Sydney, NSW, Australia

Postby BeHaV3 » Tue Jan 05, 2010 5:55 pm

in

will this buy include the front castor adjustor ... as in the p-29...and rear thingamie on their website?

edit: & roll centre adjust 4 evo?
Last edited by BeHaV3 on Tue Jan 05, 2010 5:58 pm, edited 1 time in total.
CJ RA. Stock!
Image

tjoz
Lancer Ralliart
Lancer Ralliart
Posts: 699
Joined: Sun Oct 04, 2009 3:51 pm
Location: Melbourne, Australia

Postby tjoz » Tue Jan 05, 2010 5:56 pm

I interested but all depends when in February. I plan on getting rest of my exhaust by end of Jan so all depends how much I have left over. For now, I will go for the front bar.

1x BMF56XZ

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Tue Jan 05, 2010 6:00 pm

@ BeHaV3: You can get whatever Whiteline parts you wish, just need the part numbers.

@ Tjoz: probably like to have it all done and dusted (including delivered) by the end of February. I'll put you down for a front.

User avatar
Hecky
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 474
Joined: Sun Dec 06, 2009 4:22 am
Location: Sydney, Australia

Postby Hecky » Tue Jan 05, 2010 7:01 pm

I am definitely interested in the RA front bar 26mm-Sport-BMF56XZ, and RA rear bar 24mm-Sport-BMR85XZ. However need to find out final pricing and delivery (and possible installation, I know the rear is easy enough to install, but what about the front? Is it the same?) :?
HKS/AMS/GFB/MRT/K&N/DBA
Whiteline/Ultra-Racing/Rexpeed/Autometer/Yokohama Racing/Cusco
...and some other stuff which the fun police don't approve of... :)

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Tue Jan 05, 2010 7:06 pm

Excuse my ignorance, but do you need to do a wheel alignment after installing these?
Got a question? Read the ClubCJ Ultimate Guide First!!

Image

Just...Dont worry about it ;)Dont Click Me

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Tue Jan 05, 2010 7:08 pm

Final price will depend on numbers. The more people means greater savings :)

Installation shouldn't be too hard. The front would be a little harder, but still DIY for most people.

User avatar
SAM-24A
Alumni
Alumni
Posts: 2921
Joined: Sun May 17, 2009 4:40 pm
Location: Sydney NSW

Postby SAM-24A » Tue Jan 05, 2010 7:21 pm

Hey Tadz, "NO" Wheel Alignment is not needed at all.
Fitting Sway Bars does not alter or change your Suspension Geometry.
It just Limits Body Roll during spirited cornering, Hense Whitelines Logo "Flatout"

Often Ignorance leads to Knowledge !!!

Cheers: Sam
Last edited by SAM-24A on Tue Jan 05, 2010 7:23 pm, edited 2 times in total.

User avatar
Mizta B
Alumni
Alumni
Posts: 5867
Joined: Sun Dec 21, 2008 8:29 am
Location: Mortdale, NSW, Australia

Postby Mizta B » Tue Jan 05, 2010 7:22 pm

Added myself to the list Adrian
Same two as yourself (Same car - go figure LOL)
BMF56XZ & BMR86XZ
Thanks Chris.
Australasian Gerbil Rearers Organisation, Official Re-Seller.
Image
MY09 Rally Red VRX ClubCJ's 1st 4B12 2.4L - CCJ Lifetime Member #0004.
Merlinised....


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 11 guests