***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

*CLOSED* Japan Parts GB R1 Completed Dec '09

For all ClubCJ Members.

Moderator: Senior Moderators

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Thu Dec 03, 2009 4:46 pm

I wanted to get both sides (There are left rear fogs and right rear fogs) but thought I'd need reversing lights more hahaha

User avatar
Tin_Pusher
Lancer ES/EX
Lancer ES/EX
Posts: 186
Joined: Wed Sep 23, 2009 8:14 pm
Location: Woodend, Victoria

Postby Tin_Pusher » Thu Dec 03, 2009 7:19 pm

SIR-VRX wrote:It would plug in, but not work at all. For starters, it would need the switch on the indicator stalk (different stalk to the VR/VRX with front fogs) plus it would also need to be in the programming of the ETACS, but it is not :sad:

I toyed with the idea of getting the rear fogs for the sedan (replaces one of the reverse lights) but not even the wiring is in for ours.
Ah, OK - thanks for the info.

Well, I'll just have to settle for plugging the hole.

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Thu Dec 03, 2009 7:20 pm

You can always wire it to your own circuit and switch ;)

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Dec 03, 2009 7:30 pm

There are a couple of plugs at the back of the Sportback which are left dangling (tin_pusher) showed me. The sedan however only has one of those plugs.

I suspect these plugs could be what triggers the rear fog lamp. As shown by our spanish friend josec yesterday, with his fog lights on in front, his rear fog light came on. So the natural conclusion would be that with the foggies on, the rear one would come on as well if plugged in.

We don't even need a set to try. All we need is a multimeter to test the plugs. With the foggies on and with them off.

We have very competent sparkies here who can suggest possible tests.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
Tin_Pusher
Lancer ES/EX
Lancer ES/EX
Posts: 186
Joined: Wed Sep 23, 2009 8:14 pm
Location: Woodend, Victoria

Postby Tin_Pusher » Thu Dec 03, 2009 7:31 pm

True ....... something to think about. It would really want to be wired in such a way to come on with the front fog lights though, otherwise as has been said it's something to forget to switch off.

Great ideas come out here - we've had rear torpedo launcher/phaser cover, extra heavy duty reverse sensor cover .....

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Thu Dec 03, 2009 7:33 pm

They are switched separately ofey (front and rear)

To confirm, in JOSEC's thread, he has a picture of his indicator stalks, and you can see the dual-action switch ;)

Also, don't forget it you are not allowed to use the fog lights "except in fog or other atmospheric condition which restricts visibility"

User avatar
Tin_Pusher
Lancer ES/EX
Lancer ES/EX
Posts: 186
Joined: Wed Sep 23, 2009 8:14 pm
Location: Woodend, Victoria

Postby Tin_Pusher » Thu Dec 03, 2009 7:49 pm

Actually, an illuminated switch on the dash e.g. one of the blanks where the ASC switch is could be the go. Make it hard to miss if it is switched on. Where would you buy a switch to fit the space & match the ASC one?

Re this pix from behind my bumper - the fog lamp is a two pin connector so that accounts for the one on the right. What is the other for - a trailer connector?
Image

User avatar
JOSEC
Lancer ES/EX
Lancer ES/EX
Posts: 103
Joined: Wed Nov 04, 2009 8:23 am
Location: Sevilla (Spain)

Postby JOSEC » Fri Dec 04, 2009 2:08 am

Hi friends

.... Yes, the fog lamp is a two pin connector, the big connector is for the parking sensors...

Here you can see the two connectors plugged

Image

The fog light in place

Image

All cables goes out of sight between the body and bumper

Image

Last summer, another car hit my fog light, I found this photo of my car in the technical service where you can see the wires ...

Image

Image

GREETINGS JOSEC... :wink:
Image
Como se dice ... en español? Un idioma nunca es suficiente - Salud!

User avatar
Tin_Pusher
Lancer ES/EX
Lancer ES/EX
Posts: 186
Joined: Wed Sep 23, 2009 8:14 pm
Location: Woodend, Victoria

Postby Tin_Pusher » Fri Dec 04, 2009 7:36 am

Thanks JOSEC; pix much appreciated!

User avatar
JOSEC
Lancer ES/EX
Lancer ES/EX
Posts: 103
Joined: Wed Nov 04, 2009 8:23 am
Location: Sevilla (Spain)

Postby JOSEC » Fri Dec 04, 2009 7:53 am

We are a team!!! he,he... 8)


Look at this I found in Japan:

http://minkara.carview.co.jp/userid/621 ... /note.aspx


Pass the wire around here ....

Image


:wink:
Image

Como se dice ... en español? Un idioma nunca es suficiente - Salud!

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sun Dec 06, 2009 9:47 pm

Right boys, time to close this and place our order.

ORDER LIST
1. TinPusher (VIC) : FogLamp + Sportback Badge = A$190 + Shipping (PAID)
2. ofey (VIC) : Galant Fortis Badge = A$70 + Shipping (PAID)
3. DVS (VIC) : SportBack Badge = A$45 + Shipping
4. Mizta_B (NSW) : Galant Fortis Badge = A$70 + Shipping (PAID)
5. blade888 (NSW) : SportBack Badge = A$45 + Shipping (PAID)
6. Bandit (NSW) : SportBack Badge = A$45 + Shipping (PAID)
7. SIR-VRX (QLD) : a. Ralliart Sports Radiator Cap + b. Scuff Plate (Galant Fortis) = A$240 + Shipping

For all those who want parts on this, please pay now. Following all payments, I will then place the order... .
Last edited by ofey on Tue Dec 08, 2009 7:00 am, edited 1 time in total.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sun Dec 06, 2009 9:50 pm

Are you going to front the shipping for us at this stage? Or can you get a shipping quote through the shopping cart and work from there?

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sun Dec 06, 2009 9:54 pm

Fronting first. When it gets to me then I'll charge back to get them sent out to everyone.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Sun Dec 06, 2009 9:58 pm

Ok :)

User avatar
Tin_Pusher
Lancer ES/EX
Lancer ES/EX
Posts: 186
Joined: Wed Sep 23, 2009 8:14 pm
Location: Woodend, Victoria

Postby Tin_Pusher » Mon Dec 07, 2009 11:33 am

Transfer done ofey - you should see it tomorrow (Tuesday).


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 28 guests