ClubCJ - The CJ Lancer Club

In response to the many requests I get on this site for parts, I thought it best to start this thread of the current list of parts I've gotten for various people on this site. This will also act as a check on prices offered by our sponsors and also give "variety" to the community.

Please note that all add on ornaments are made either of fibreglass or FRP and finished in Matte Black paint while body parts are made of FRP p and primed prior to shipping. All body kits are direct bolt on. No further work need to be done on them.

I will add to this list in time, so check back.

Sources:
VOX Motorsports
Scorpion Kits
HOS Automotive

Add on Ornaments
a) MITSUBISHI LANCER 08 S-TYLE FRONT BUMPER UNDER V-LIP BODYKIT.

Cost: A$330.00 Delivered

b) MITSUBISHI LANCER 08 VOX STYLE FRONT BUMPER LOWER CENTRE LIP ON DIFFUSER.

Cost: A$160.00 Delivered

c) Evo X front Nose Piece

Cost: A$150 Delivered
Comment: Requires you to cut your front bumper bar!

d) Evo X Side Vents

Cost: A$150 Delivered

e) 3D Eyelids

Cost: A$150 (Color matched + Delivered) or A$120 (Matte Black + Delivered).

f) Evo X CF Wing (1 piece) VERSION 1 (Made in Taiwan)



Cost: A$400
(to be delivered from within Australia)

g) Evo X CF Wing (1 piece) VERSION 2 (Made in China)


Cost: A$400 (+Delivery)
(to be delivered from within Australia)

h) CF Wing Trunk Lid (Made in China)

Cost: A$550 (+Delivery)
(to be delivered from within Australia)

i) CF Rear Diffuser (Made in China)


Cost: A$200 *DELIVERED*
(to be delivered from within Australia)
* As you can see 10 only. Limited run.
* Pure Carbon Fibre. Not Fibreglass.
Update 10 May 2010 - 2 left.

j) CF Bonnet (Made in China)


Price: A$600 (+Delivery)

k) VRX Spoiler (Made in Taiwan)

Made of ABS Plastic. Un-primed & Un-painted. Most panel shops will charge you about A$180 to prime and paint match.
Price: A$150.00

Bodykits
i) HOS Bodykit Ver. A Front


ii) HOS Bodykit Ver. B Front


iii) HOS Single Exhaust Rear Diffuser


iv) HOS Dual Exhaust Rear Diffuser


v) HOS GT Front Lip Kit


vi) HOS GT Dual Exhaust Rear Diffuser


vii) HOS GT Style 3 piece Rear Spoiler



Alternate views of GT Kits




Guide Pricing (All prices are exclusive of shipping. All body kits are shipped from Singapore)
- Front Lip (i or ii) = A$320.00
- Single Exhaust Kit (iii) = A$325.00
- Dual Exhaust Kit (iv) = A$355.00
- GT Front Lip Kit (v) = A$375.00
- GT Dual Exhaust Rear Diffuser (vi) = A$410.00
- GT style Side Skirts = A$380.00
- GT Style 3 piece Rear Spoiler = A$475 (delivered)

I have a one time offer now for the HOS Type B kit.



These parts are included:
1.Front skirt (polyurethane, primed)
2. Rear skirt (polyurethane, primed)
3. Side skirt (polyurethane, primed)
4. Spoiler (fiber, primed)
5. Evo X front grille and number plate mount (fiber, primed)
Full Set only DELIVERED to your door � A$1,400.00

Please don't ask me if you can just get specific parts. This sale is a ONE OFF to try and ensure that everyone on this site can see what HOS kit is like since everyone is NOT game enough to bite the bullet. So they've asked me to make this one off offer.

I don't think you'll get a better value buy.

I've asked my panel shop here and he says if this all fits, he'll put it on for a further A$200 and paint everything for a further A$650

For the CF Rear Diffusers
All those who have expressed an interest here will get first dibs. So:
1. ofey - INSTALLED (passed on to Tadz0rz)
2. leevin - Purchased
3. Aspired - Purchased
4. Ozie replaces cjsig replaces klue2k - INSTALLED
5. ash06 - Purchased
6. Andros - INSTALLED
7. deano1964 - INSTALLED
8. dragansj - INSTALLED
9. aspir3 - INSTALLED
10. Rob-VRX - Purchased

To the others, if these guys don't pick up then the rest of you can come on.

Right, let's see you boys now... .
*wonder if I'll be left high and dry again*

hey ofey was wondering if you could get the side stap (side skirt extensions) from scorpionkits.. and if so could you get a pricing?



http://www.scorpionkits.com/album/main. ... ar2=700_85

I've been thinking of the Talon rear diffuser,
but I'll pick this one up aswell as I haven't really
decided if I will get the Talon yet.

Ofey:
I'll pick it up on Friday at the mini meet.
I don't think I have been to a meet with you where
I haven't given you money for something

I just noticed the CF bot lid has a hole for the Smart key button. That eliminates the purchase from a lot of members.

OR is there a version without that hole?

Oh and good idea with this thread ofey, you do a great job with the sourcing!

@ SIR-VRX : Well I could get one like that but for starters, the guy (Scott_VRX_Fan) who wanted this has a VRX and if he pulled out, both me and my brother have VRX & O.Ed. so I had to go for one with the hole. Yes we can get one without the hole no problems.

A bump again. So 5 of those rear diffusers are spoken for. 5 to go now.

lol, get it right ofey.

i pulled out because

1. you said they stuffed it up and made it for an evo - and they are a different size than vrx.

2. you couldnt tell me when it was coming in as i wanted to get my boot fixed finally.

now as it is, i still havent had time to get my boot fixed, and when i do they are going to have it in the shop for a week ... which im reluctant to do so .... is it sorted? and now fits the vrx? im still interested, though price has gone up abit.


and a question, with the evo X front bumber, can you get the mesh behind it?

Besides RRM, does anyone else sell a Carbon Fibre V-Lip ?

Interested in the HOS Single/Dual Exhaust Rear diffuser (iii/iv)... anyone else interested as well?

As long as shipping isn't too expensive

It seems to be functional and not just for looks plus it looks like it doesn't cover the rear parking sensors... and i don't think it's fibreglass either which is a plus.

-EXALTD-

>.<shipping>.<

CF boot, Jizz

I want to know something about the GT kit is it wide body or normal? also is it a lip kit or a whole new bar?

and will it fit on the ES model

looks like its a normal body , which comes with the front lip that goes onto your original bumper.

they should fit all lancers i think, have to reconfirm with the chief

@ Scott_VRX_Fan : For the Evo X bumper, yes you can mesh behind it. See Ozie's ride.

@ exaltd & Blanka: Shipping is the problem but if I get enough orders, I could go for a 20ft container that's US$600 all in. We can fit whatever we want into it for shipping. It'll be a new high for group buying. But don't forget, we'd definately then won't be under the tax threshold. You can't win them all.

@ Blakey : Normal body. Fits any CJ Lancer including ES. It's a lip kit so it makes use of your original bumper.

I'm after the HOS GT kit for the ES frontlip rearlip and sideskirts how much would that be for all them including shipping? to Brisbane 4502. wanting to order them possibly in the next few weeks. if possible. just gotta pay some bills first then will be able to pay for them. plus is there any other thing i should know about the lipkit, like material, whether its painted or primed or just the material.