***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

*CLOSED* LANCER New Style L.E.D. Tail Lights

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Jul 08, 2010 4:08 pm

51 pieces.
Nett loss of A$780.00 overall.

Turned out to be a pretty horrific group buy. At A$700+ there was so much interest. Then when I brought it in so many pulled out.

Then people asking for deals. Some person NEVER paying me for his and never passing on the money other people paid him for lamps. So in the end I had to sell those people lamps at a lower price. Lies within lies.

Then now we have a new sponsor coming on who is going to be offering them for A$350 delivered. Almost 1 yr on. The company are also offering to sell them to me for much less but now I can't see myself holding 50 units again.

Good grief! I'm grateful its all gone.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
BlueWRX
Lancer Legend
Lancer Legend
Posts: 1010
Joined: Fri May 29, 2009 11:42 am
Location: Sydney

Postby BlueWRX » Thu Jul 08, 2010 4:13 pm

well done Ofey.

Who is the new sponsor?

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Jul 08, 2010 4:17 pm

Will be announced once they decide to pay the vendor or sponsorship fees. or when Shane and Chris collect the money from them.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

smithsy
Lancer VR/GT
Lancer VR/GT
Posts: 252
Joined: Wed Jan 27, 2010 8:54 am
Location: West side

Postby smithsy » Thu Jul 08, 2010 4:21 pm

MP Trader is the only other people I've seen selling them for $350 a pop....

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Jul 08, 2010 4:25 pm

I think you'll find that MP Trader want GST and Postage on top of that.
our new sponsors will ship it to you for A$350 flat!

All those who were first on the scene like MP Trader and ourselves paid the going rate of the lamps when they first came out. Now 1 yr on, the manufacturer has dropped the price. So if you sea freight + done everything at the right time, you could have got these lamps stupidly cheap.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Clone
Lancer Newbie
Lancer Newbie
Posts: 80
Joined: Thu Jun 24, 2010 11:59 pm
Location: Brisbane, Australia

Postby Clone » Thu Jul 08, 2010 9:28 pm

ofey wrote:Good grief! I'm grateful its all gone.


Sorry to hear your story. Irviny you are doing a great job, it's sad to know it ended up like this. Might need to think of a better way in organising a group buy. What if you ask to put in a deposit first before you make the order?

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Jul 08, 2010 9:37 pm

These lamps were done at the start of the club. Most of the initial group were close and pretty tightly knit and I trusted everyone.

I usually trust everyone I meet. If you were here in Melbourne, you'd realise I buy stuff for everyone here on credit. Some of the kids even pay for their stuff in installment.

Just seems that people outside Melbourne aren't as reliable... . Perhaps Australia isn't really homogeneous... .

We will always meet bumps and stuff here and there. What goes around comes around. So I think karma will come back and bite these people ... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
kinesis
Project Team Member
Posts: 778
Joined: Thu Nov 26, 2009 7:07 pm
Location: QLD, Australia

Postby kinesis » Thu Jul 08, 2010 9:40 pm

Well...it's done. We've learnt our lessons, good and bad.

Thanks ofey.
Blitz Air Filter | RPW Stage 1 ECU Flash Tune | UR Front Tower Strut Bar | UR Rear Lower Bar
Alpine iDA-X305 headunit | LED Taillights | VG Sharkfin Antenna

User avatar
Clone
Lancer Newbie
Lancer Newbie
Posts: 80
Joined: Thu Jun 24, 2010 11:59 pm
Location: Brisbane, Australia

Postby Clone » Thu Jul 08, 2010 10:48 pm

Yeah karma will take care of everything. Hope this don't put you off in being our Chief Buyer.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Jul 08, 2010 10:51 pm

Not put off but I am looking to clear out everything left behind first before I start up new parts.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
PYLee
Lancer MASTER
Lancer MASTER
Posts: 1808
Joined: Wed Aug 05, 2009 1:29 am
Location: Melbourne, VIC

Postby PYLee » Thu Jul 08, 2010 11:02 pm

haha i like it when you say kids
Lancer Evolution 10MR

User avatar
JaCe
Alumni
Alumni
Posts: 1819
Joined: Thu Jun 04, 2009 7:17 am
Location: Sydney, AU

Postby JaCe » Fri Jul 09, 2010 9:06 am

Also sad to hear this GB took so long and brought on so many difficulties for you mate. I think it's probably best that we as a group stick to the cash upfront and no credit route unless you really want to personally vouch for someone. Safer this way.
Image

"A man who stands for nothing, falls for anything."

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Fri Jul 09, 2010 9:16 am

It's not a question of vouching. Companies don't do 10-20 sets as a group buy. 55 was their starting gambit. Then everyone wanted it fast so air freight was necessary.

I sold 20 in the first month with people again questioning the A$400 price when they were originally quoted A$700 from a Singaporean re-seller at the time. So suddenly all the sales stopped cos people thought since it dropped over A$300 it'll drop even more!

As I said, I'm not going to do anymore group buys until someone clears my leftovers.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
draevon
Lancer Ralliart
Lancer Ralliart
Posts: 689
Joined: Fri Oct 23, 2009 9:09 am
Location: Brisbane
Contact:

Postby draevon » Fri Jul 09, 2010 9:31 am

Congratz on finally being rid of these Ofey ... annoying that for all the hassle you went through you also lost money. These things were the first I bought when I got my Lancer and joined the forum. I'm sure a lot of us appreciate your efforts. You need a blacklist :)
.
Image
GReddy Spectrum Elite Exhaust - TEIN S.Tech Springs - Injen CAI- 3D Eyelids - Carbon Fiber Interior - Pivot Shift Light - Smoked LED Taillights - Carbonout & Debadge.

User avatar
tryg
Lancer MASTER
Lancer MASTER
Posts: 2135
Joined: Sun Jun 21, 2009 9:21 pm
Location: Toowoomba, QLD, Australia

Postby tryg » Fri Jul 09, 2010 10:25 am

Irving.. people outside Melbourne have been trustworthy too... you guys don't have a monopoly on that!

Kids..? yeah, he wasn't referring to all of us...

I am trying to help you clean up your leftovers.. can't put anything more on the car unless you have some freaky good parts left I have not known about!! Or, that I haven't bought from you already...


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 52 guests