***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

*CLOSED* 3D Eyelids

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

*CLOSED* 3D Eyelids

Postby ofey » Thu May 07, 2009 10:24 am

As usual, I'll need at least 5 to make this possible.
Comes in all colors EXCEPT Blue :(
ImageImageImage
ImageImage
and as seen on ROTM winner for May 2009 Jacob1bc's ride:
Image
Here are the colors available:
1) WHITE - W37
2) SILVER - A31
3) GREY - A39
4) RED - P26
5) BLACK - X42
6) MATTE BLACK
7) for the Blue(T50) Pricing needs to be confirmed as there is no such color in Singapore.

ofey wrote:Unlike the lip buy, I doubt you're going to find a problem with these ones as they are attached using industrial 3M tape and the item is finished unlike the lips which are only "primed".


eBay price of US$138.00 (A$182.79)
Dependent on response, price will be adjusted.

For those who did not take part in the first group buy (of front lips): A$160.00
For those who DID: A$117.25

EOI list:
1.

Disclaimer
Any accessory, product or modification to your vehicle could be classified as illegal, depending on various laws and regulations in your country/area. It is up to you, the individual, to ascertain whether the accessory, product or modification is classified as illegal.

ClubCJ nor its members or representives can be held liable for any infringements or the like associated with any products or modifications mentioned on this website or in any correspondance from it's members or representives.
Last edited by ofey on Tue Sep 08, 2009 8:05 am, edited 8 times in total.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
Nicho
Lancer VR/GT
Lancer VR/GT
Posts: 232
Joined: Sun Jan 18, 2009 7:30 am
Location: Melbourne, VIC, Australia

Postby Nicho » Fri May 08, 2009 12:23 pm

Interested but price would have to be significantly lower than that

User avatar
jamez707
Lancer MASTER
Lancer MASTER
Posts: 1508
Joined: Mon Oct 20, 2008 5:10 pm
Location: Brisbane, QLD, Australia

Postby jamez707 » Fri May 08, 2009 5:42 pm

ill second that the price is a bit much but i am interested as long as i can get them in my dark gray
Red Tail Light Brigade Member #3 - ClubCJ Lifetime Member #007
JAMEZ THE TAGMASTER

Image

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Fri May 08, 2009 9:33 pm

I've updated the pricing... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Nicho
Lancer VR/GT
Lancer VR/GT
Posts: 232
Joined: Sun Jan 18, 2009 7:30 am
Location: Melbourne, VIC, Australia

Postby Nicho » Sat May 09, 2009 1:20 pm

When you refer to the first group buy which one exactly is that?

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sat May 09, 2009 2:40 pm

Nicho wrote:When you refer to the first group buy which one exactly is that?


Those that bought them lips... .
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Scott_VRX_Fan
Lancer VR/GT
Lancer VR/GT
Posts: 212
Joined: Sat Apr 18, 2009 5:35 pm
Location: Cranbourne, VIC, Australia

Postby Scott_VRX_Fan » Sat May 09, 2009 5:05 pm

im in, on the proviso that they grey = effects grey?

$115 right? seems alright if they are prefinished :)
Mods Completed
ANZ Tazer 18" Wheels, Rear LED Tailights, GReddy Spectrum Elite Exhaust, Eibach Pro Kit Suspension 1.2" Front 0.8" Rear

Mods To Be Completed
Front Bumper Upgrade

Mods in Development
Brembo Brakes, Rear Wing, Bonnet, Inbuilt Sat Nav

User avatar
JazzyB
Lancer Ralliart
Lancer Ralliart
Posts: 731
Joined: Thu Feb 12, 2009 2:42 pm
Location: Melbourne, VIC, Australia

Postby JazzyB » Sat May 09, 2009 5:44 pm

legality anyone?
Fill me in - these do look nice and that price is not the highest for a finished part.....

I just wanna keep my ride legit! - does anyone know (not does anyone think... I can do that myself!) does anyone KNOW without a doubt that these would be legal / illegal?

User avatar
jamez707
Lancer MASTER
Lancer MASTER
Posts: 1508
Joined: Mon Oct 20, 2008 5:10 pm
Location: Brisbane, QLD, Australia

Postby jamez707 » Sun May 10, 2009 8:40 am

for that price i will probably be in but needs to
be effect gray
Red Tail Light Brigade Member #3 - ClubCJ Lifetime Member #007

JAMEZ THE TAGMASTER



Image

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sun May 10, 2009 8:50 am

jamez707 wrote:for that price i will probably be in but needs to
be effect gray


Just to make sure there's no mistake, you're up for A$160.00 if you're keen on these since you were NOT part of the first group buy of lips.

The dealer has offered that special price simply due to the number of problems that arose in the first group buy as a kind of apology.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
b3n87
Lancer VR/GT
Lancer VR/GT
Posts: 238
Joined: Sun Jan 25, 2009 1:33 pm
Location: Melbourne, VIC, Australia

Postby b3n87 » Sun May 10, 2009 1:10 pm

think black ones would look good on my blue lancer?

User avatar
JazzyB
Lancer Ralliart
Lancer Ralliart
Posts: 731
Joined: Thu Feb 12, 2009 2:42 pm
Location: Melbourne, VIC, Australia

Postby JazzyB » Sun May 10, 2009 1:15 pm

ey - these things aren't legal in aus are they? not street-legal... ??

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sun May 10, 2009 1:20 pm

JazzyB wrote:ey - these things aren't legal in aus are they? not street-legal... ??


Hmm I wonder why not? It's doesn't block any lighting nor change any colors.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
JazzyB
Lancer Ralliart
Lancer Ralliart
Posts: 731
Joined: Thu Feb 12, 2009 2:42 pm
Location: Melbourne, VIC, Australia

Postby JazzyB » Sun May 10, 2009 1:43 pm

I'm under the impression (but don't know 4 sure) that ANYTHING that covers the headlight or taillight of a vehicle is illegal unless it has been passed in a roadworthy (ie. we may get a canarie until we can get a roadworthy, which would probably deem the eyelids ok because as u say they don't block anything)

I'm 90% sure u wouldn't even get the cops look at them.
I'm 90% sure that if u were in a crash, AAMI wouldn't have a problem with them...

But that's still 10% chance that u could get F'd over if they AREN'T legal... so anyone sure sure sure about it?

User avatar
JazzyB
Lancer Ralliart
Lancer Ralliart
Posts: 731
Joined: Thu Feb 12, 2009 2:42 pm
Location: Melbourne, VIC, Australia

Postby JazzyB » Sun May 10, 2009 2:11 pm

ok... my cuz came over and gave me a aussie roadworthy book that he's got... (he's a mechanic) it's like, a compressed version, so it doesn't have EVERY detail in there, but he said it's what a mechanic uses when checking for R.W. so it should do the trick...

Says that as long as front lights don't dazzle u or oncoming (or drivers in front / rearview mirror) traffic, and the beam still comes out of the headlight at a certain angle (somethiing to check maybe) there's no problem with it.

Also said "headlight dividers / trim must not cover the main part of the light" - a little ambiguous, but it's not really I wouldn't say.....

that being said... I don't think I will be in on this one anyways mate - nice find tho - price seems decent ;-)


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 39 guests