***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

* Mitsubishi OEM Parts for ClubCJ Members *

For all ClubCJ Members.

Moderator: Senior Moderators

User avatar
Paulio
Lancer Learner
Lancer Learner
Posts: 10
Joined: Sun May 19, 2013 1:19 am
Location: ROCKDALE

Postby Paulio » Wed Oct 15, 2014 4:55 am

Hi
I am looking for MZ360289EX (Aluminium cvt shift knob for RHD lancer).

User avatar
JustinR
Site Admin
Site Admin
Posts: 1954
Joined: Sat Jan 22, 2011 6:26 pm
Location: Sutherland Shire, Sydney

Postby JustinR » Wed Oct 15, 2014 9:13 am

Fixed thread

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Oct 27, 2014 12:55 pm

Paulio wrote:Hi I am looking for MZ360289EX (Aluminium cvt shift knob for RHD lancer).


Paulio, I find that this is better bought through eBay.
MMAL charges a ridiculous amount for it.
I bought mine from these clowns.

BTW there is no RHD or LHD type shift knob.
They're both the same.

deerose wrote:Hi, Im after the reverse camera kit with cover and harness. The harness is really hard to find online. How do I go about ordering and shipping? Im based in Sydney.


PM-ed you.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Oct 30, 2014 10:15 am

Hate to be the bearer of bad news but it would seem Mitsubishi are starting to stop production of alot of accessories.

I tried to order:
MZ360240EX CARPET MAT SET(MANUAL)Lancer Evolution Logo

These have now apparently been stopped from Production and Mitsubishi Australia has no back log stock either.
If your dealer has one in stock I suggest you buy it.

My parts contact is telling me alot of stuff are now going to fall off the available to order list.

You have been warned.
If you want an OEM accessory, please order it ASAP.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
turbogirl
Lancer MASTER
Lancer MASTER
Posts: 2251
Joined: Fri Sep 09, 2011 5:47 pm
Location: Ipswich

Postby turbogirl » Thu Oct 30, 2014 5:05 pm

:shock:
turbogirl
Member's Liaison Officer
Executive Team

In debt and loving it

User avatar
lancerdarryl
Lancer MASTER
Lancer MASTER
Posts: 1929
Joined: Wed Jul 14, 2010 3:10 am
Location: Newcastle NSW Australia

Postby lancerdarryl » Fri Oct 31, 2014 9:51 am

ofey wrote:Hate to be the bearer of bad news but it would seem Mitsubishi are starting to stop production of alot of accessories. I tried to order: MZ360240EX CARPET MAT SET(MANUAL)Lancer Evolution Logo These have now apparently been stopped from Production and Mitsubishi Australia has no back log stock either. If your dealer has one in stock I suggest you buy it. My parts contact is telling me alot of stuff are now going to fall off the available to order list. You have been warned. If you want an OEM accessory, please order it ASAP.

Ralliart Floor mats (MZ360274EX) and Evolution SST floor mats (MZ360239EX) are still available.I have just ordered a set of each for the spares cupboard.
Evolution X MR+ Lancer VRX Sportback +LA Lancer GSR
"Don't back off until you hit something"

User avatar
pneill
Lancer ES/EX
Lancer ES/EX
Posts: 140
Joined: Tue Apr 22, 2014 3:30 pm
Location: newcastle, australia

Postby pneill » Mon Nov 10, 2014 12:30 pm

Hi Ofey wondering if you can confirm for me the difference in part numbers for the full size spare wheel kit for MY15 ralliart lancer compared to the fullsize spare wheel kit for a std lancer with 16 inch wheel.. as you see in the picture back on page one it show what looks to be a 16inch wheel instead of the ralliart's 18inch wheel. - MR936218 - Full Size Spare Kit (16inch picture)
MY15 Ralliart Lancer - Titanium

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Mon Nov 10, 2014 2:45 pm

MR936218 is indeed the full size spare wheel kit. What it consists off are a few pieces of styrofoam which raises the platform to accomodate the full size wheel.

If you think about it,
a 16 or 18 inch (diameter) wheel will fit your wheel well in the boot. What won't is how the platform seems on top of it, so by raising this, you're really accommodating the rim width of the wheel not the diameter. So the kit is not to allow you to carry a larger diameter wheel but a larger rim width

The wheel you see in the picture is not a 16 wheel design.

I hope you see my point.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
pneill
Lancer ES/EX
Lancer ES/EX
Posts: 140
Joined: Tue Apr 22, 2014 3:30 pm
Location: newcastle, australia

Postby pneill » Mon Nov 10, 2014 3:31 pm

Yup got u on the wheel well,l no issues fitting there. , just concerned here, as I have requested full size spare kit for ralliart which looks identical to the photo, but the foam in that photo and what I currently have doesnt make the wood and mat clear the wheel width, causing mat to have dips at sides and rear where the Styrofoam is to low. Hence why I wanted to confirm if there was a different kit around... Bit odd to give out a kit that raises the floorline a bit but now leaves the floor uneven.

Thank for the info though, apparently I've now been told that there is no specific kit for ralliart, so I wonder how to explain speedies different kit
MY15 Ralliart Lancer - Titanium

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Mon Nov 10, 2014 5:48 pm

Paul the RA has a shallower boot then the normal lancer hence the different kit
Image

[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]

User avatar
pneill
Lancer ES/EX
Lancer ES/EX
Posts: 140
Joined: Tue Apr 22, 2014 3:30 pm
Location: newcastle, australia

Postby pneill » Tue Nov 11, 2014 7:56 am

Okay.. yeah I'm feeling that the end of life of the ralliart is making parts harder to find.. e.g. the correct style styrofoam for RA like yours speedie...

Another trip back to the dealer this thursday to see what else they have that 'might fit' and get the floor nice and flat again... fingers crossed this debacle can be over.
MY15 Ralliart Lancer - Titanium

User avatar
belle_tb_ES
Post Monster
Post Monster
Posts: 2614
Joined: Tue May 08, 2012 11:39 am
Location: Hills District, NSW

Postby belle_tb_ES » Tue Dec 02, 2014 12:12 pm

Hi Irving

Just confirming part number 1505A265 RA Air Snorkle is $135 + shipping (would that be approx $15??)
PRESENT: 2015 Audi S3

PAST:2009 Lancer ES called Lancee...


Garage: http://clubcj.net/garage.php?mode=view_vehicle&CID=947
I

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Fri Dec 12, 2014 7:37 am

High I'm new here, just got a CJ this week.

I'm after some floor and dash mats, just wondering if the first post still applies and what I need to do to get some, hopefully before the new year.
Image
My rides CJ VRX - CC coupe

manamp27
Lancer Learner
Lancer Learner
Posts: 4
Joined: Mon Dec 01, 2014 9:57 pm
Location: Sydney

Postby manamp27 » Wed Dec 17, 2014 11:15 pm

Hi Irving (Chief Buyer),

New owner and chasing the audio control 8701A087 for my new hatch.

Mitsubishi Parts are a bunch of thieves.

Are you able to supply and ship to Sydney please?

Thanks.
2009 ES Lancer Hatch

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Dec 18, 2014 11:41 am

Manuel, I suggest you buy this one:

http://www.ebay.com.au/itm/Mitsubishi-L ... 1c412a34d5
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors


Return to “Group Buys Service”

Who is online

Users browsing this forum: No registered users and 19 guests