***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

New sound/video clip of my car!

All Lancer Related Videos & Automotive Reviews.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
jacob1bc
INACTIVE Member Account
Posts: 170
Joined: Fri Oct 10, 2008 7:16 pm
Location: Maxwell afb - Montgomery, AL, USA

New sound/video clip of my car!

Postby jacob1bc » Wed Mar 04, 2009 7:33 am

Image

the clip is with RRM header v2, injen SES, RRM piggy, RRM timing box, RRM sri. there are still some problems but RRM it helping me out with resolving it. i have a CEL P0137, thats o2 sensor low voltage(bank1 sensor 2). and the other problem is that when the car is in drive it doesn't sound right. here's a clip of that


Image

the exhaust moves a lot and i think it's causing a exhaust leak. the think is that all off the bolts are snug. i have been playing with this for 2 days now. hope you enjoy the first clip and your input on the second clip.
2008 Lancer - Fuel Door,Blacked Out Front,Debadged Rear,RRM Pulley,RRM SRI,RRM Front And Rear Slotted Rotors,Megan Racing Coilovers,Shark Fin Antenna,Injen SES, HID 6000k,Floor Board Lighting,Grill Lighting,Killer Glass Kit,RA taillights,eye lids,Header
User avatar
spunkybob
Lancer MASTER
Lancer MASTER
Posts: 1605
Joined: Thu Dec 04, 2008 11:36 am
Location: Kariong, NSW, Australia

Postby spunkybob » Wed Mar 04, 2009 8:02 am

That second clip is fkt lol..

Sounds nice in the 1st 1.

Can you go for a drive and get some clips of you driving around 3-3.5k RPM :)
Image
>CLICK HERE to view My 08 Lancer in all its Glory!
"Its STILL happy go fun fun time!"
User avatar
Josh_Emerton
Lancer MASTER
Lancer MASTER
Posts: 1920
Joined: Fri Oct 17, 2008 10:49 pm
Location: Cairns, QLD, Australia

Postby Josh_Emerton » Wed Mar 04, 2009 10:26 am

woah yeah jacob, thats moving heaps, and sounds sorta like my nose at the moment (I'm ill lol)

First one sounds decent though.
Image
User avatar
jacob1bc
INACTIVE Member Account
Posts: 170
Joined: Fri Oct 10, 2008 7:16 pm
Location: Maxwell afb - Montgomery, AL, USA

Postby jacob1bc » Wed Mar 04, 2009 1:28 pm

i told you there was a problem. i just don't know what to do.
2008 Lancer - Fuel Door,Blacked Out Front,Debadged Rear,RRM Pulley,RRM SRI,RRM Front And Rear Slotted Rotors,Megan Racing Coilovers,Shark Fin Antenna,Injen SES, HID 6000k,Floor Board Lighting,Grill Lighting,Killer Glass Kit,RA taillights,eye lids,Header
User avatar
Ozie
INACTIVE Member Account
Posts: 5445
Joined: Mon Sep 22, 2008 7:00 am
Location: Sydney, NSW, Australia

Postby Ozie » Wed Mar 04, 2009 2:29 pm

yes Jacob that looks like to much movement.....it should not be doing that..
its like it is flexing in the middle..
i just had a look under my car and in line with the centre door pillar under the car the pipe is secured to the chassis......is yours???
mine flexes a tiny bit, but yours looks like it is not connected there??? why?
User avatar
jacob1bc
INACTIVE Member Account
Posts: 170
Joined: Fri Oct 10, 2008 7:16 pm
Location: Maxwell afb - Montgomery, AL, USA

Postby jacob1bc » Wed Mar 04, 2009 2:40 pm

Ozie wrote:yes Jacob that looks like to much movement.....it should not be doing that..
its like it is flexing in the middle..
i just had a look under my car and in line with the centre door pillar under the car the pipe is secured to the chassis......is yours???
mine flexes a tiny bit, but yours looks like it is not connected there??? why?


i don't know what your talking about. secured where, can you get a good pic? i but in all of the bolts on and the hangs are on the exhaust. yes it moves a lot, but i thought it might be that the cat or something is cloged
2008 Lancer - Fuel Door,Blacked Out Front,Debadged Rear,RRM Pulley,RRM SRI,RRM Front And Rear Slotted Rotors,Megan Racing Coilovers,Shark Fin Antenna,Injen SES, HID 6000k,Floor Board Lighting,Grill Lighting,Killer Glass Kit,RA taillights,eye lids,Header
User avatar
Ozie
INACTIVE Member Account
Posts: 5445
Joined: Mon Sep 22, 2008 7:00 am
Location: Sydney, NSW, Australia

Postby Ozie » Wed Mar 04, 2009 2:43 pm

yeah it could be blocked or something...?
ok i will go take a pic.....hang on a sec......
User avatar
jacob1bc
INACTIVE Member Account
Posts: 170
Joined: Fri Oct 10, 2008 7:16 pm
Location: Maxwell afb - Montgomery, AL, USA

Postby jacob1bc » Wed Mar 04, 2009 2:53 pm

cool thanks
2008 Lancer - Fuel Door,Blacked Out Front,Debadged Rear,RRM Pulley,RRM SRI,RRM Front And Rear Slotted Rotors,Megan Racing Coilovers,Shark Fin Antenna,Injen SES, HID 6000k,Floor Board Lighting,Grill Lighting,Killer Glass Kit,RA taillights,eye lids,Header
User avatar
Ozie
INACTIVE Member Account
Posts: 5445
Joined: Mon Sep 22, 2008 7:00 am
Location: Sydney, NSW, Australia

Postby Ozie » Wed Mar 04, 2009 3:01 pm

Yo!!!
remember this is in the middle of the car in line with the front doors...

Image

Image

this stops mine from flexing to much....
i hope it helps but....
Jacob i am thinking what you said, it might be obstructed in some way?
User avatar
jacob1bc
INACTIVE Member Account
Posts: 170
Joined: Fri Oct 10, 2008 7:16 pm
Location: Maxwell afb - Montgomery, AL, USA

Postby jacob1bc » Wed Mar 04, 2009 3:09 pm

thanks for the pics. yes i have that on my car + i have a injen SES, but i still get all that flex. i don't know. when i called RRM they told me to give it a day or two. to see if there is any carbon build up around the bolt on joints, but that's not the problem. that's why i think it's cloged
2008 Lancer - Fuel Door,Blacked Out Front,Debadged Rear,RRM Pulley,RRM SRI,RRM Front And Rear Slotted Rotors,Megan Racing Coilovers,Shark Fin Antenna,Injen SES, HID 6000k,Floor Board Lighting,Grill Lighting,Killer Glass Kit,RA taillights,eye lids,Header
User avatar
Ozie
INACTIVE Member Account
Posts: 5445
Joined: Mon Sep 22, 2008 7:00 am
Location: Sydney, NSW, Australia

Postby Ozie » Thu Mar 05, 2009 12:17 am

ok jacob,, take it to a Muffler shop ASAP....
get the muffler dude just to have a look..
User avatar
Josh_Emerton
Lancer MASTER
Lancer MASTER
Posts: 1920
Joined: Fri Oct 17, 2008 10:49 pm
Location: Cairns, QLD, Australia

Postby Josh_Emerton » Thu Mar 05, 2009 2:14 am

Yeah totally agree. He might charge some but hell, its worth it, rather than the muffler falling off.
Image
User avatar
jacob1bc
INACTIVE Member Account
Posts: 170
Joined: Fri Oct 10, 2008 7:16 pm
Location: Maxwell afb - Montgomery, AL, USA

Postby jacob1bc » Thu Mar 05, 2009 8:51 am

i am going tomorrow. made a appointment.
2008 Lancer - Fuel Door,Blacked Out Front,Debadged Rear,RRM Pulley,RRM SRI,RRM Front And Rear Slotted Rotors,Megan Racing Coilovers,Shark Fin Antenna,Injen SES, HID 6000k,Floor Board Lighting,Grill Lighting,Killer Glass Kit,RA taillights,eye lids,Header
User avatar
spunkybob
Lancer MASTER
Lancer MASTER
Posts: 1605
Joined: Thu Dec 04, 2008 11:36 am
Location: Kariong, NSW, Australia

Postby spunkybob » Thu Mar 05, 2009 9:14 am

should be good
Image

>CLICK HERE to view My 08 Lancer in all its Glory!

"Its STILL happy go fun fun time!"
User avatar
Panther4B11
INACTIVE Member Account
Posts: 342
Joined: Thu Dec 18, 2008 11:22 pm
Location: Brisbane, QLD, Australia

Postby Panther4B11 » Thu Mar 05, 2009 9:31 am

wow thats a strange wobble. good thing you are getting it check tomorrow.
Image
Post Reply

Return to “Videos & Reviews”

Who is online

Users browsing this forum: No registered users and 8 guests