Welcome to the new ClubCJ Forums! Modifications are still being made, please contact JustinR or Kav91 if you have any issues!

**Official Stance Thread**

Car Images, Wallpapers/High Res, Photography Skills & Idea's.

Moderators: Senior Moderators, Moderators

User avatar
PYLee
Lancer MASTER
Lancer MASTER
Posts: 1808
Joined: Wed Aug 05, 2009 1:29 am
Location: Melbourne, VIC

**Official Stance Thread**

Postby PYLee » Sat Oct 22, 2011 9:23 am

Morning ladies and gents,

I'm making this thread so that all you guys out there with aftermarket wheel and/or aftermarket suspension could post up the details of it (ie size width offset of wheels and what suspension with height settings and alignment settings). This way , it will help provide a great reference to anyone that is out there with questions, trying to figure out how their car will look with a particular size.

Feel free to post up other people (quoting them with their username and which forum)'s setup with the available information.

I'll start by posting my current setup.

Wheels : Volk Racing TE37 Super Lap
Size : 18x9.5 +22 offset
Tyres : Hankook Ventus V12 265/35/18
Suspension : Stock
Alignment : Stock
Comments : 18x9.5 +22 is a great size for an overall look , nothing over the top yet flush. If i were to get another set , it will definitely be a set of 18x10.5 +22 or +18 for more hellaflush setup :)


Cheers guys :wink:
Lancer Evolution 10MR

User avatar
billy boy
Lancer Evolution
Lancer Evolution
Posts: 782
Joined: Sun Nov 22, 2009 5:10 pm
Location: Adelaide

Postby billy boy » Sat Oct 22, 2011 10:27 am

Wheels : Volk Racing CE28n
Size : 18x9.5 +28 offset
Tyres : Sivlerstone Evo8 245/40/18
Suspension : Racing logic coliovers -
Alignment : - 2 camber
Comments : i love the look of these rims, maybe a touch too aggressive, but i made my car fit the rims - rears are flared 12-15mm - if i had my time again, may have looked at 18x9 +36 super flush without the need for flaring / repainting. would i really change it though? not on your life *cool* thinking of going 265 35 with the next tyres, so will need to work the fronts

235 and pre-defect (now it's 15mm higher)
Image

245 and normal ride height (although it's a touch compressed / lower than normal due to the slight turn)
Image
Last edited by billy boy on Thu Apr 19, 2012 11:36 pm, edited 2 times in total.
we are fascinated by that which can destroy us...

User avatar
juanito
Lancer Newbie
Lancer Newbie
Posts: 46
Joined: Sun Nov 28, 2010 12:59 am
Location: Melbourne, Australia

Postby juanito » Sun Apr 01, 2012 7:14 am

Good thread. Buying new set up soon. Pics would be great too.

@ PYLee & Billy Boy: U guys have +22 and +28 offset with 18x9.5. Do u guys hit the guards?
@ PYLee: Can u post up some pics pls? cheers

User avatar
sleeper
Genius
Genius
Posts: 8259
Joined: Fri Apr 23, 2010 10:14 am
Location: brisbane
Contact:

Postby sleeper » Sun Apr 01, 2012 7:33 am

thats aggressive for a RA bill :)
210 KWATW 400nm RALLIART Virtual Dyno 1/1
http://goo.gl/GrUosm


Image

User avatar
SAM-24A
Alumni
Alumni
Posts: 2921
Joined: Sun May 17, 2009 4:40 pm
Location: Sydney NSW

Postby SAM-24A » Sun Apr 01, 2012 9:32 am

Wheels
Type: Apec F11's / Zumbo Siphon
Size: 18" x 8" x 40mmET (offset)
Tyres: Bridgestone Potenza RE003 ... 225 x 45 x 18"

Suspension
Shocks: Factory KYB Firm Range Shocks (RA/VRX)
Springs: Eibach
Sway Bars: Whiteline ... Front 24mm / Rear 24mm + Lateral Locks.
Strut Brace: Whiteline ... KSB638.
Rear Brace: Alutec ... Upper & Lower Brace Bars.

Suspension Set-Up
Lowered: 30mm
Front: 1* Neg Camber / 1mm Toe-In
Rear: 1* Neg Camber / 3mm Toe-In

Wrap-Up
Nothing Overly Done ---
Tightened & Tweaked just enough to behave adequately for Spirited Road use whilst conserving Tyre wear .... :)




Sam ..... *thumb*
Merlinised AspiRe 2.4L
Last edited by SAM-24A on Mon Aug 08, 2016 7:49 pm, edited 2 times in total.

User avatar
JustinR
Site Admin
Site Admin
Posts: 1942
Joined: Sat Jan 22, 2011 6:26 pm
Location: Sutherland Shire, Sydney

Postby JustinR » Sun Apr 01, 2012 10:33 am

Wheels : Privat Kontakt
Size : 18x8.5 +35mm ET
Tyres : Toyo Proxes4 235/40/18
Suspension : Stock
Alignment : Stock

Comments: Car looks more aggressive with the fatter tyres from the back & because they sit outside the guards. Car will need to be lower to give it a better stance though. Also, will need to roll the guards, have noticed with passengers in the back, or going over potholes too fast, back will rub/hit.

LaNcE
Lancer VR/GT
Lancer VR/GT
Posts: 219
Joined: Mon Jan 10, 2011 1:33 pm
Location: melbourne, victoria

Postby LaNcE » Sun Apr 01, 2012 2:14 pm

Wheels : Enkie RPF1
Size : 18x9.5 +15 offset
Tyres : Toyo Proxies 4 245/40/18
Suspension : tein springs soon to be BC's
Alignment : f: -2 R -1.5
Comments : could do with a bit more low and bit more guard roll so i can fit fatter tires.


lee: should post up pics too! =P

User avatar
funnyfi
Lancer VR/GT
Lancer VR/GT
Posts: 227
Joined: Wed Feb 03, 2010 1:35 am
Location: Sydney, Australia

Postby funnyfi » Sun Apr 01, 2012 6:02 pm

pics from side of each setup would be great!

User avatar
Tweak
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 459
Joined: Sun Nov 14, 2010 6:11 am
Location: Australia

Postby Tweak » Sun Apr 01, 2012 6:30 pm

Wheels : Orign DNA
Size : 18x9 +30mm ET
Tyres : Falcon 245/40 r18
Suspension : Racing logic coil overs
Alignment : Not sure cant remember. Until i can get Rear guards rollers and flared then it will sit better.

User avatar
billy boy
Lancer Evolution
Lancer Evolution
Posts: 782
Joined: Sun Nov 22, 2009 5:10 pm
Location: Adelaide

Postby billy boy » Fri Apr 06, 2012 12:58 pm

juanito wrote:Good thread. Buying new set up soon. Pics would be great too. @ PYLee & Billy Boy: U guys have +22 and +28 offset with 18x9.5. Do u guys hit the guards? @ PYLee: Can u post up some pics pls? cheers

sorry, missed the q - there was a bit of work getting it to fit - the rears were pulled to fit the 235 / 245. fronts didn't require any work up to 245. i've ordered 255 35 and will need to roll the front to fit a bit better (265 was a bridge too far)
we are fascinated by that which can destroy us...

User avatar
tadz0rz
Genius
Genius
Posts: 6950
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Fri Apr 06, 2012 6:20 pm

Wheels: Evo X BBS RS GT
Size: 18x8.5 38mm Offset
Tires: Carbon Series CS88 235/40/18
Suspension: Pedders lowering springs
Alignment: Uhhh....

Comments: Fitted to my ES Lancer. Perfect fitment on the front and rear gaurds. Need to roll rear guards to stop rubbing. Need maybe a 5mm spacer for the rear and some negative camber to get the stance im looking for but sits nice and flush for the moment :)
Got a question? Read the ClubCJ Ultimate Guide First!!
Image
Just...Dont worry about it ;)Dont Click Me

User avatar
rayray
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 372
Joined: Sat May 29, 2010 6:00 pm
Location: Melbourne

Postby rayray » Sat Apr 14, 2012 3:01 pm

Wheels : Work CR Kai Bronze
Size : 18x8.5 +30
Tyres : Stock Yokohama Advan A10 215/45/18
Suspension : BC BR Coilovers
Alignment : Approx. -1.5 camber all round
Comments : 18 x 8.5 +30 makes it perfectly flush! nice aggressive fitment on the NA/RA Lancers.

User avatar
Hoges
Alumni
Alumni
Posts: 3719
Joined: Fri Oct 09, 2009 11:36 am
Location: Sydney

Postby Hoges » Tue Apr 17, 2012 8:37 pm

Wheels : Konig Deception Black with Ball cut Blue in spokes
Size : 18x8 et+40
Tyres : Federal 595, 225/45/18
Suspension : Stock
Alignment : Stock
Comments : The blue on the spokes looks so awesome when the wheels are rolling. Can't say to much for the tyres yet as they are new but they already feel so much better then the stock 16s. 40offset brings the spokes only a hair outside the fender.
Lets Play Paintball!!
View my car here!

User avatar
RyanMK
Lancer Legend
Lancer Legend
Posts: 1115
Joined: Mon Apr 26, 2010 6:15 pm
Location: Adelaide

Postby RyanMK » Tue Apr 17, 2012 11:18 pm

rthieu wrote:Wheels : Work CR Kai Bronze Size : 18x8.5 +30 Tyres : Stock Yokohama Advan A10 215/45/18 Suspension : BC BR Coilovers Alignment : Approx. -1.5 camber all round Comments : 18 x 8.5 +30 makes it perfectly flush! nice aggressive fitment on the NA/RA Lancers.


Pictures!!!! :D
VG/Ultra Racing/Whiteline/Work/Ralliart/Supercircuit/Cosworth/Pioneer/BC/Recaro

User avatar
big_d
Lancer VR/GT
Lancer VR/GT
Posts: 211
Joined: Fri Jun 18, 2010 9:00 am
Location: Wellington, New Zealand
Contact:

Postby big_d » Thu Apr 19, 2012 8:07 am

Yes, pics on everyone's post would be great.

SAM-24A wrote:18 x 8 x 40mmET (offset)
Falken FK452 ... 225 x 45 x 18


That's the same set-up i'm going for.
Did you need to roll the guards at all Sam? How do you find the Falken FK452's?


Return to “Image Gallery”

Who is online

Users browsing this forum: No registered users and 2 guests