***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

**Official Stance Thread**

Car Images, Wallpapers/High Res, Photography Skills & Idea's.

Moderators: Moderators, Senior Moderators

User avatar
Quismiff
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 355
Joined: Wed Apr 12, 2017 8:37 pm
Location: Melbourne
Contact:

Re: **Official Stance Thread**

Postby Quismiff » Sat Aug 26, 2017 7:06 pm

Lancer1993 wrote:lancer2014 - whats that under the rear?


A lower control arm upgrade kit, some replace the subframe also.
2007 MY08 VR-X (cj-red)

I'm an eccentric smart-arse whose sarcasm has him perpetually in the s#@!.

User avatar
dat-nippa.daz
Lancer Learner
Lancer Learner
Posts: 5
Joined: Sat Aug 12, 2017 4:08 am

Re: **Official Stance Thread**

Postby dat-nippa.daz » Sun Aug 27, 2017 4:08 pm

Damir wrote:a guard roll for the rears is a must. you might struggle fitting the meisters as they are wide and a moderately aggressive offset.
if you plan to splash out then try and get some rear camber arms (megan racing are the most commonly used around here) and lower the car quite a bit to achieve some natural camber as well.

the d9r with +38 offset will be fine with just a roll



Thnx heaps for the advice and appreciate the time!

ReidVR
Lancer Newbie
Lancer Newbie
Posts: 37
Joined: Sun Jul 16, 2017 8:07 pm
Location: Newcastle, NSW

Re: **Official Stance Thread**

Postby ReidVR » Tue Jan 16, 2018 4:51 pm

Hey guys, I’m looking at getting a second hand set of Avid Av-01’s, sized 18x9.5 +35 with stretched 225/40r18‘s. will these fit on my 2009 VR sedan? Cheers
MY09 CJ VR Lancer

User avatar
Ronan.Butler11
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 331
Joined: Sun Apr 17, 2016 9:38 pm
Location: Sydney, NSW, AUS

Re: **Official Stance Thread**

Postby Ronan.Butler11 » Tue Jan 16, 2018 7:37 pm

ReidVR wrote:Hey guys, I’m looking at getting a second hand set of Avid Av-01’s, sized 18x9.5 +35 with stretched 225/40r18‘s. will these fit on my 2009 VR sedan? Cheers


im not too good with offsets, but the width of 9.5 most not fit without adjustment to the guards. BUT you CAN make them fit with some effort
there is a guy on FB who runs 9.5's on his VRX and he needed an alignment to give the car camber to slightly tuck into the guards as well as having them rolled

9.5's look good if you put in the time to do it properly. to put the size into context:

i Run 18x8's with stretched 215's and they poke about 4mm out of stock guard.

if you rolled the absolute bollocks out of the guards and have some camber, maybe?

would wait for bumblebee or someone better with sizes to confirm this though, im purely going off a guy i know off FB and comparing against my size rims
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)

'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*

ReidVR
Lancer Newbie
Lancer Newbie
Posts: 37
Joined: Sun Jul 16, 2017 8:07 pm
Location: Newcastle, NSW

Re: **Official Stance Thread**

Postby ReidVR » Tue Jan 16, 2018 8:22 pm

Cheers Ronan, ahh alright, I was looking to go for 18x8’s but this is too good of a deal! $850 for the set, and perfect condition. But I guess I’ll hve to keep looking :(
MY09 CJ VR Lancer

User avatar
Ronan.Butler11
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 331
Joined: Sun Apr 17, 2016 9:38 pm
Location: Sydney, NSW, AUS

Re: **Official Stance Thread**

Postby Ronan.Butler11 » Tue Jan 16, 2018 9:05 pm

ReidVR wrote:Cheers Ronan, ahh alright, I was looking to go for 18x8’s but this is too good of a deal! $850 for the set, and perfect condition. But I guess I’ll hve to keep looking :(


like i said, if you are willing to camber and roll guards, go for it, worse case scenario you sell the rims for what you got them for (maybe a bit more) and buy new ones

entirely up to you
"When I Grow Up, I Wanna Be An Evo! (9 MR with a filthy BOV)

'09 Lancer VRX
Modifications:
De-Res Then a 2.5" Dual Exit X-Force Axle back Exhaust
18" King Rims
Ralliart Snorkel
LED No. Plate lights and interior
*insert further useless modifications to make it seem like i'm good at this*

User avatar
aspir3
Site Admin
Site Admin
Posts: 8189
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Re: **Official Stance Thread**

Postby aspir3 » Wed Jan 17, 2018 5:55 am

ReidVR wrote:Hey guys, I’m looking at getting a second hand set of Avid Av-01’s, sized 18x9.5 +35 with stretched 225/40r18‘s. will these fit on my 2009 VR sedan? Cheers

Those are more Evo wheel/tyre specifications.
The short answer they won't fit without adjusting your guards and suspension geometry.

I suggest you look for a wheel less than 8.5" and offset between 35-46 and stay with 225 tyres.
Image
Nice work Skip' now where the bloody hell is Sunny?

Please check out my GARAGE and feel free to leave a comment.

ReidVR
Lancer Newbie
Lancer Newbie
Posts: 37
Joined: Sun Jul 16, 2017 8:07 pm
Location: Newcastle, NSW

Re: **Official Stance Thread**

Postby ReidVR » Thu Jan 18, 2018 3:45 pm

Thanks heaps aspir3
MY09 CJ VR Lancer

User avatar
lancer2014
Lancer Newbie
Lancer Newbie
Posts: 57
Joined: Tue May 17, 2016 12:35 pm
Location: Puerto Rico

Re: **Official Stance Thread**

Postby lancer2014 » Wed Jan 31, 2018 4:15 am

Lancer1993 wrote:lancer2014 - whats that under the rear?


acura RSX 06 sub frame
RRM crank pulley
RA snorkel
Takeda intake
Ecu reflash
Magnaflow cat back 2.5
Eibach pro kit
Avid 1- 06 18 x 8.5 x 35et
Hidro Real Carbon

Image

User avatar
Lancer1993
Post Monster
Post Monster
Posts: 3899
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: **Official Stance Thread**

Postby Lancer1993 » Wed Jan 31, 2018 6:30 pm

:D
Image
Image
My rides CJ VRX - CC coupe

User avatar
sarusa
Lancer Legend
Lancer Legend
Posts: 1006
Joined: Fri Sep 04, 2015 3:22 pm
Location: melbourne

Re: **Official Stance Thread**

Postby sarusa » Thu Feb 01, 2018 9:15 am

I'll say one thing that yellow paint on the trailer makes a great safety feature.

User avatar
Lancer1993
Post Monster
Post Monster
Posts: 3899
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: **Official Stance Thread**

Postby Lancer1993 » Thu Feb 01, 2018 5:01 pm

Wait til you see the rails I'm working on for the top!

The big thing that is needed is new springs and tires before it goes any long distance at speed.
Image

My rides CJ VRX - CC coupe


Return to “Image Gallery”

Who is online

Users browsing this forum: No registered users and 2 guests