***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Front parking lights

HID's, Bulb's + LED Interior and Exterior Illumination.

Moderators: Moderators, Senior Moderators

Post Reply
User avatar
exaltd
Lancer Evolution
Lancer Evolution
Posts: 796
Joined: Thu Aug 06, 2009 12:19 pm
Location: Melbourne, VIC, Australia

Front parking lights

Postby exaltd » Mon Aug 24, 2009 11:02 pm

Hi guys,

Just wondering, where can I get some front parking lights (w5w) that are LED or SMD?

I went to Bright Light Auto Parts, and they didn't have any... the lady in charge also sold me the wrong one, assuring me that the T10 wedge would fit the w5w port... i guess she was wrong! :)

There are so many on EBay, that i don't know which one to get, and I don't know where else to go to buy SMD's.

Thanks in advance.

-EXALTD-
User avatar
LZY_EYE
Genius
Genius
Posts: 6382
Joined: Mon Jun 29, 2009 10:12 am
Location: Central Coast, NSW

Postby LZY_EYE » Mon Aug 24, 2009 11:07 pm

I have T10s from bright light auto parts in my parkers and they work fine... I also have them in my number plate lights too.

I think they are the 7led ones from memory....
User avatar
Deano1964
Lancer Evolution
Lancer Evolution
Posts: 773
Joined: Tue Mar 17, 2009 12:22 am
Location: Melbourne, VIC, Australia

Postby Deano1964 » Mon Aug 24, 2009 11:08 pm

parking lights.....Wedge Globes?
The T10's fit
Image
I have 12V T10 4 CHIP LED WEDGE SUPER BRIGHT WIDE ANGLE
That i bought from BRIGHT LIGHT AUTO PARTS.
They work great!
Image
SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Mon Aug 24, 2009 11:12 pm

T10 is the same a w5w :S

Bright light have the best quality LEDs for the money anywhere!! No ebay trash!
User avatar
Deano1964
Lancer Evolution
Lancer Evolution
Posts: 773
Joined: Tue Mar 17, 2009 12:22 am
Location: Melbourne, VIC, Australia

Postby Deano1964 » Mon Aug 24, 2009 11:16 pm

Bright light have the best quality LEDs for the money anywhere!! No ebay trash!


+1!

They are really great bunch of people there and very helpful.
Image
User avatar
exaltd
Lancer Evolution
Lancer Evolution
Posts: 796
Joined: Thu Aug 06, 2009 12:19 pm
Location: Melbourne, VIC, Australia

Postby exaltd » Mon Aug 24, 2009 11:29 pm

??? Tried fitting them in today... did not work... bought some SMD LED's from them, and it didn't fit in at all... was too big... perhaps I must try my parking lights on there :).

That's an odd one...


On another note, seems the SMD LED Festoon 31mm for the interior dome light isn't very strong (also bought from Bright Lights), any suugestions on a porduct that is brighter?

-EXALTD-
SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Mon Aug 24, 2009 11:47 pm

Well clearly they aren't T10s then.

T15s or T20s perhaps?
User avatar
Deano1964
Lancer Evolution
Lancer Evolution
Posts: 773
Joined: Tue Mar 17, 2009 12:22 am
Location: Melbourne, VIC, Australia

Postby Deano1964 » Tue Aug 25, 2009 12:04 am

t20's are our reverse lights
Image
SIR-VRX
Genius
Genius
Posts: 7244
Joined: Mon Oct 06, 2008 11:16 pm
Location: Brisbane, QLD, Australia

Postby SIR-VRX » Tue Aug 25, 2009 12:08 am

Perhaps he got those by mistake...

Brightlights should let you exchange, provided they are not damaged
xceler8shun
Lancer Newbie
Lancer Newbie
Posts: 58
Joined: Tue Aug 25, 2009 5:30 pm
Location: Central West NSW

Postby xceler8shun » Fri Aug 28, 2009 12:34 am

I just ordered the following from brightlights

T2012V18LEDW2
31F4LEDW1PC = White
T10LEDW2P = White
T10LEDIW2P = White

Can't wait to get them in to see the difference. Someone said a few days ago when I joined that this site will start costing me $$$. :D
User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:
Contact ofey

Postby ofey » Fri Aug 28, 2009 12:37 am

On the contrary if you didn't know about this site, the mods could very well cost you more.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors
User avatar
exaltd
Lancer Evolution
Lancer Evolution
Posts: 796
Joined: Thu Aug 06, 2009 12:19 pm
Location: Melbourne, VIC, Australia

Postby exaltd » Fri Aug 28, 2009 12:39 am

Thanks for the advice people.

In actual fact, it was a faulty LED :). So I did buy T10 Wedges but the size was a bit off, so they replaced it for free! Now my lights look brilliant!

And yes, this site does cost u money, but it's all worth it to get such a nice personalised car! :)

-EXALTD-
xceler8shun
Lancer Newbie
Lancer Newbie
Posts: 58
Joined: Tue Aug 25, 2009 5:30 pm
Location: Central West NSW

Postby xceler8shun » Sat Sep 05, 2009 10:14 am

deano1964 wrote:t20's are our reverse lights


Just tried to install the T2012V18LEDW2 I bought of Bright Light auto and the base is too big for the reversing lights. Possibly wrong item in the blister pack, will go look again later.

All the others loog good installed though.
xceler8shun
Lancer Newbie
Lancer Newbie
Posts: 58
Joined: Tue Aug 25, 2009 5:30 pm
Location: Central West NSW

Postby xceler8shun » Sat Sep 05, 2009 10:32 am

xceler8shun wrote:
deano1964 wrote:t20's are our reverse lights


Just tried to install the T2012V18LEDW2 I bought of Bright Light auto and the base is too big for the reversing lights. Possibly wrong item in the blister pack, will go look again later.

All the others look good installed though.


Just checked again, the reversing bulb has w16w on the bulb with the base about half that of the T20 purchased.

Guess it wass the T15 (T15L2P) that I need for the reversing lights.
User avatar
asHxP
Lancer VR/GT
Lancer VR/GT
Posts: 204
Joined: Wed Mar 18, 2009 5:48 pm
Location: Sydney, NSW, Australia

Postby asHxP » Sat Sep 05, 2009 2:05 pm

I bought my SMDs from this ebay seller and they work perfectly fine

http://cgi.ebay.com.au/194-White-1w-LED ... 286.c0.m14
Post Reply

Return to “Lighting”

Who is online

Users browsing this forum: No registered users and 24 guests