***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

All Lighting Questions Here!

HID's, Bulb's + LED Interior and Exterior Illumination.

Moderators: Moderators, Senior Moderators

User avatar
AUSSIECJ
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 414
Joined: Mon Aug 23, 2010 4:39 pm
Location: Blacktown, Australia

Postby AUSSIECJ » Mon Sep 20, 2010 4:02 pm

i know this is a noob question. but how do you wire multiple lights to the same switch
I LOVE HATERS ;)
Image
By aussiecj at 2010-09-20

User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Postby Blakey » Mon Sep 20, 2010 4:50 pm

AUSSIECJ wrote:i know this is a noob question. but how do you wire multiple lights to the same switch


you just wire them in parallel after the switch.

to put it simply and give you a better under standing.

you have 1 cable coming into the switch, and on the other side of the switch you will have multiple wires, (doesn't have to be exactly like that but it gives a better view on what parallel wiring is). just remember if you put the switch on the + then multiple wires will all be the positives also.

the - can either go to a common - like the metal body, or to a negative cable picked up from nearby, both should work fine.


-----+/^\-----+/^\----
This is series, + connects to negative of previous load, after the first one.

+ _
|-----/^\------|
|-----/^\------|
This is parallel all positives for each load are connected and all negative for each load are connected, (not all at one point) more a common + for each and a common - for each



Also there is no Noob Question, except the question that is unasked
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM

User avatar
AUSSIECJ
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 414
Joined: Mon Aug 23, 2010 4:39 pm
Location: Blacktown, Australia

Postby AUSSIECJ » Mon Sep 20, 2010 5:24 pm

thanks for the blake. cause im thinking of wiring up an led grill and undercar kit. still thinking about it. might just do the grill. ill see how i feel +1
I LOVE HATERS ;)

Image

By aussiecj at 2010-09-20

User avatar
dtrial
Lancer Newbie
Lancer Newbie
Posts: 52
Joined: Tue Jun 08, 2010 1:54 am
Location: Western Australia

Postby dtrial » Mon Oct 11, 2010 9:27 pm

Newb question:
I've just changed my stock bulb with Philips HID kit 6000k about 2 months ago.
Recently, whenever I switch on the lights, the front left side bulb flickers slightly before fully operating (during warming up).
However, it doesn't flicker when its fully lit though.
Is that a serious problem? or it is normal?
any info is appreciated!

User avatar
lancervr
Lancer MASTER
Lancer MASTER
Posts: 1923
Joined: Sat Oct 17, 2009 2:26 am
Location: WA,Australia

Postby lancervr » Mon Oct 11, 2010 9:31 pm

has it been like that since u got it or just recently?
Image

~LancerVR~
Your friendly neighbourhood Red Devil (cj-red)

User avatar
BR14AN
Lancer Ralliart
Lancer Ralliart
Posts: 650
Joined: Thu Jan 21, 2010 10:53 pm
Location: Cherrybrook, NSW
Contact:

Postby BR14AN » Mon Oct 11, 2010 9:36 pm

Hids flicker a bit while they warm up, thats why you dont really use HID kits in your high beams, coz they need to warm up to be at maximum output, dont worry about it :D

User avatar
dtrial
Lancer Newbie
Lancer Newbie
Posts: 52
Joined: Tue Jun 08, 2010 1:54 am
Location: Western Australia

Postby dtrial » Mon Oct 11, 2010 9:53 pm

Its just been recently though about 2 weeks back.
A few weeks after I got them on, has no flicker at all. just pure changing colour during the warm ups.
The reason why I am concerned about is that when I first received the HID kit, half of the box was wet (ordered it from singapore).
So I'm not sure if that could cause problems with the kit.

User avatar
AUSSIECJ
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 414
Joined: Mon Aug 23, 2010 4:39 pm
Location: Blacktown, Australia

Postby AUSSIECJ » Sat Oct 16, 2010 10:21 am

what kind of lights can i use to replace my dome lights, i want to have blue lighting
I LOVE HATERS ;)

Image

By aussiecj at 2010-09-20

User avatar
Tarquin
Lancer Legend
Lancer Legend
Posts: 1015
Joined: Wed Sep 03, 2008 8:54 am
Location: BrisVegas, QLD, Australia

Postby Tarquin » Sat Oct 16, 2010 4:38 pm

32mm festoons.... LED Blue
- CCJ Premium Member #0015.
Image
Tarq's Paintshop

User avatar
AUSSIECJ
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 414
Joined: Mon Aug 23, 2010 4:39 pm
Location: Blacktown, Australia

Postby AUSSIECJ » Sun Oct 17, 2010 1:08 am

thanks pete
I LOVE HATERS ;)

Image

By aussiecj at 2010-09-20

User avatar
AUSSIECJ
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 414
Joined: Mon Aug 23, 2010 4:39 pm
Location: Blacktown, Australia

Postby AUSSIECJ » Sun Oct 17, 2010 9:52 am

anyone know where i can purchase the festoons for the map lights and dome light???
I LOVE HATERS ;)

Image

By aussiecj at 2010-09-20

User avatar
Itachi
Lancer Evolution
Lancer Evolution
Posts: 776
Joined: Sun Aug 22, 2010 2:49 am
Location: Perth, Australia

Postby Itachi » Sun Oct 17, 2010 11:49 am

Most people go with ebay. I went to Malz and got some but tbh the ones off ebay were better and way cheaper so I returned the Malz ones and went for ebay. If you look back through this thread and the numerous threads that talk about LEDs then you will find all the answers.
Like my car? Follow my fitness blog!

http://www.littleguylifting.com/

User avatar
ijustatecurry
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 395
Joined: Thu Jan 20, 2011 5:00 pm
Location: Glen Waverley, VIC Australia

Postby ijustatecurry » Wed Feb 02, 2011 5:28 pm

Anybody else have Narva Arctic Blue bulbs installed? I popped them into my RA the other day and am quite disappointed with the colour. Basically looks almost exactly like the halogen globes that were in it except a touch lighter. Anybody else seen this issue? Or, stupid question, do they lighten a bit after a few hours?

Cheers
All bleeding stops eventually!

User avatar
Dire
Post Monster
Post Monster
Posts: 3042
Joined: Tue Mar 09, 2010 6:38 pm
Location: Canning Vale (Perth)

Postby Dire » Wed Feb 02, 2011 7:02 pm

I do. They're a fraction whiter, thats it. I wouldn't get them again.

User avatar
princesskelsey
Lancer Learner
Lancer Learner
Posts: 17
Joined: Thu Sep 16, 2010 9:39 pm
Location: Caloundra, Queensland

Postby princesskelsey » Mon Apr 11, 2011 10:54 pm

I've been told to be careful of which bulbs i select to change my headlights to the blue/white without having HID's. My headlight covers are plastic and apparently they will go yellow if i chose the wrong ones.

Any recommendations on what brand & brightness i should use.


Return to “Lighting”

Who is online

Users browsing this forum: No registered users and 47 guests