***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

All Lighting Questions Here!

HID's, Bulb's + LED Interior and Exterior Illumination.

Moderators: Moderators, Senior Moderators

User avatar
Mark14
Lancer Newbie
Lancer Newbie
Posts: 42
Joined: Tue Dec 02, 2014 7:22 pm
Location: Sydney, Australia

Postby Mark14 » Fri Jan 30, 2015 6:36 pm

HELP! I have t10 bulbs for my parking lights, and i can access and remove the parking lights from the socket, but i dont know how to remove the actual parking light from its (for lack of a better word) connection point???

User avatar
Mark14
Lancer Newbie
Lancer Newbie
Posts: 42
Joined: Tue Dec 02, 2014 7:22 pm
Location: Sydney, Australia

Postby Mark14 » Fri Jan 30, 2015 6:36 pm

I have a MY15 Lancer Es Sport btw

User avatar
Bigdamos
Lancer Newbie
Lancer Newbie
Posts: 49
Joined: Sat Jul 12, 2014 9:51 am
Location: Buderim, Sunshine Coast, Australia

Postby Bigdamos » Fri Jan 30, 2015 9:08 pm

I have replaced my parking bulbs with LED's from Jaycar on my 2014 Sportback and all it took was a bit of force. Just pull further down the globe as well. more towards the socket then pulling from the top. Hope that helps.

User avatar
byzon3
Lancer ES/EX
Lancer ES/EX
Posts: 168
Joined: Wed Oct 31, 2012 11:51 am
Location: Hills District

Postby byzon3 » Fri Jan 30, 2015 9:32 pm

They just need a good yank

As long as your holding the connection and the globe separately there should be no issue

User avatar
Digital
Lancer Newbie
Lancer Newbie
Posts: 97
Joined: Mon Oct 14, 2013 8:47 pm
Location: Melbourne, Australia

Postby Digital » Thu Feb 12, 2015 11:54 am

So back with the issue of the LEDs for the reverse lights.

Noticed something weird last night, went to change out on of my flickering LEDs and when I installed the new ones, putting the car into reverse, the lights will go off after about two seconds.

I thought nothing of it so left it in and then when I went to drive off, it kept happening. Replaced them with my old halogen ones and it's all fine again.

I'm guessing it's resistor related. What wattage are people running on their reverse lights?

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Postby Lancer1993 » Thu Feb 12, 2015 1:49 pm

Sorry if this has been asked/answered but there are 9 pages here LOL

Yellow tint for head lights, I know its used in countries with long winters but just wondering where there stand here for legality?
Image
My rides CJ VRX - CC coupe

Davidb0312
Lancer Learner
Lancer Learner
Posts: 8
Joined: Sat Jan 09, 2016 10:46 pm
Location: Penrith

Postby Davidb0312 » Mon Jan 11, 2016 8:35 pm

hi,

New to the forum - hoping to get some advice as this is my first lancer and I'm not that handy with doing any mods.

I bought a 2015 LS Lancer

Hoping to change the headlights to something liek these two but want to ensure that they will be an easy fit to my car.

http://www.ebay.com.au/itm/171178553097 ... cbe56&cp=1

or

http://www.ebay.com.au/itm/130626392268 ... d8ced&cp=1

thanks!

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Mon Jan 11, 2016 8:47 pm

Both involve removing the front bumper. Try searching Utube or asking a member who has done it before.

Otherwise most panel beaters will be able to fit it but it takes half the fun of modding your car if you pay someone to do it for you.

Davidb0312
Lancer Learner
Lancer Learner
Posts: 8
Joined: Sat Jan 09, 2016 10:46 pm
Location: Penrith

Postby Davidb0312 » Mon Jan 11, 2016 8:50 pm

thanks, I think something basic would be ok as I will get my friend who has changed lights in his 86 to give me a hand. I just really want to ensure the lights will fit my model and that the cost is reasonable for the parts. Just making sure the seller isnt saying whatever just to get the sale.

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Mon Jan 11, 2016 8:52 pm

Plenty of members have them. Most seem to buy them from Mars Performance

Swerve
Lancer VR/GT
Lancer VR/GT
Posts: 262
Joined: Sun Aug 09, 2015 8:52 pm
Location: Australia

Postby Swerve » Tue Jan 12, 2016 10:38 am

Mars Performance is great bit expensive but the customer service, fitment and quality are worth it. Recently I had one of my angel eyes stop working as a cable got cut in the inverter probably from rubbing on some metal in the engine bay as i didnt secure it properly. All I did was ask them for a replacement and how much it'll cost. Within a day they got back to me asking for a photo. Sent them one and 3 days later I got the whole part ready to plug and play for free. Only one headlight angel eye was broken but they sent me two so I'd have a spare.


Return to “Lighting”

Who is online

Users browsing this forum: No registered users and 8 guests