***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

SMOKED SIDE MARKERS

HID's, Bulb's + LED Interior and Exterior Illumination.

Moderators: Moderators, Senior Moderators

User avatar
SAM-24A
Alumni
Alumni
Posts: 2921
Joined: Sun May 17, 2009 4:40 pm
Location: Sydney NSW

SMOKED SIDE MARKERS

Postby SAM-24A » Tue Apr 24, 2012 5:19 pm

I purchased these from EBay today after a tip-off from member: Gleno.

Genuine "DEPO" Lighting Product.
They are E-Marked to meet Australian Design Rules, (which means they are legal to use in Aust).

1 pair (L & R are identical) @ $34.95 + $5 P&H within Aust.

EBay Link: MITSUBISHI CJ LANCER SMOKED SIDE REPEATERS (07-12) ES VR VRX and EVO X
Image
Image
Image
Image

They might not seem very dark .... which is why they meet ADR's .... if they were any darker, then they would not comply .... :roll:

I know many members on here have sprayed theirs with VHT Nite Shades & covered with various Tint Film's.
However these sprays & tints are usually very easily scratched and/or damaged via light/med contact.
These DEPO side markers are actually tinted within the plastic at the time of manufacture.

Here is DEPO's full range of Side Markers available via various Ebay traders.
Image




Sam ..... *thumb*
Merlinised AspiRe 2.4L
Sam ..... *thumb*
Merlinised MIVEC - AspiRe 2.4L

User avatar
JustinR
Site Admin
Site Admin
Posts: 1954
Joined: Sat Jan 22, 2011 6:26 pm
Location: Sutherland Shire, Sydney

Postby JustinR » Tue Apr 24, 2012 5:26 pm

I saw these on my daily search for parts today...

Let me know how you go with these, ill probably end up buying some :)

User avatar
DORA_ANNE
Lancer MASTER
Lancer MASTER
Posts: 2253
Joined: Fri Jan 01, 2010 8:07 pm
Location: Northern Rivers NSW AUSTRALIA

Postby DORA_ANNE » Wed Apr 25, 2012 4:43 pm

Thank You For Sharing This Sam .... Might Just Have To Grab Some Of These ... I Like :)
Image
Angels Are Sometimes Disguised As Friends

User avatar
Alileighju
Lancer Evolution
Lancer Evolution
Posts: 816
Joined: Sun Dec 26, 2010 12:51 am
Location: Brisbane, QLD, Australia

Postby Alileighju » Wed Apr 25, 2012 4:51 pm

I'd also be interested in how the install goes!

User avatar
Mizta B
Alumni
Alumni
Posts: 5867
Joined: Sun Dec 21, 2008 8:29 am
Location: Mortdale, NSW, Australia

Postby Mizta B » Wed Apr 25, 2012 4:54 pm

I bought some today - Let you know how they go
Cheers Chris.... :D
Australasian Gerbil Rearers Organisation, Official Re-Seller.
Image
MY09 Rally Red VRX ClubCJ's 1st 4B12 2.4L - CCJ Lifetime Member #0004.
Merlinised....

User avatar
JustinR
Site Admin
Site Admin
Posts: 1954
Joined: Sat Jan 22, 2011 6:26 pm
Location: Sutherland Shire, Sydney

Postby JustinR » Wed Apr 25, 2012 5:00 pm

Alileighju wrote:Id also be interested in how the install goes!


Install is easy, you push the blinker back, then it should come right out.

Perhaps a group buy if its worth it?

User avatar
DORA_ANNE
Lancer MASTER
Lancer MASTER
Posts: 2253
Joined: Fri Jan 01, 2010 8:07 pm
Location: Northern Rivers NSW AUSTRALIA

Postby DORA_ANNE » Wed Apr 25, 2012 5:00 pm

Mizta B wrote:I bought some today - Let you know how they go Cheers Chris.... :D


Cheers Chris .... I might need a few little hints with the Install :smile:
Image

Angels Are Sometimes Disguised As Friends

User avatar
Alileighju
Lancer Evolution
Lancer Evolution
Posts: 816
Joined: Sun Dec 26, 2010 12:51 am
Location: Brisbane, QLD, Australia

Postby Alileighju » Wed Apr 25, 2012 5:01 pm

Since the postage is so cheap ($5) it might be easier to just buy it directly off eBay.

User avatar
Mitch
Alumni
Alumni
Posts: 4105
Joined: Sat May 29, 2010 2:09 pm
Location: Brisbane Australia

Postby Mitch » Wed Apr 25, 2012 5:03 pm

this may be on the list once i can afford it after the next few things on the car :-)

User avatar
Platinum Ace
Lancer Ralliart
Lancer Ralliart
Posts: 632
Joined: Sat Mar 17, 2012 1:31 pm
Location: Townsville, Queensland

Postby Platinum Ace » Wed Apr 25, 2012 5:20 pm

Interesting....... Logs onto eBay :)
Image

User avatar
Momengah
Lancer Ralliart
Lancer Ralliart
Posts: 714
Joined: Mon Nov 22, 2010 9:59 pm
Location: Melbourne, Australia

Postby Momengah » Wed Apr 25, 2012 5:28 pm

These look really cool! Definitely on the list of to get stuff! Thanks for sharing
-Beeble spec custom tune (182kw 383nm)
-Cosworth Air Filter
-Evo X BOV
-Evo X Intercooler
-Grimmspeed 3 port
-Ultimate Racing UPICP & LICP
-HFC & Ultimate Racing catback

User avatar
empror
Lancer VR/GT
Lancer VR/GT
Posts: 201
Joined: Wed Feb 15, 2012 10:35 am
Location: Kellyville, Australia

Postby empror » Wed Apr 25, 2012 6:44 pm

If you guys want to save some cash i got the exact same amount of smoke on those lights with a can of niteshade. If youre gentle with it, it will come out looking exactly like these. I did it to the top centre brake light on the boot lid too, came out nice and gently smoked as well.

User avatar
Bags
Lancer Newbie
Lancer Newbie
Posts: 78
Joined: Sat Aug 20, 2011 2:18 pm
Location: Melbourne

Postby Bags » Wed Apr 25, 2012 6:47 pm

Any pics mate?

User avatar
bunnishiwa
Lancer Legend
Lancer Legend
Posts: 1284
Joined: Thu Dec 24, 2009 4:22 pm
Location: Rye, Melbourne

Postby bunnishiwa » Wed Apr 25, 2012 6:56 pm

Saw these on Ebay as well - quite keen I think
- Self tuned - work in progress - tune revision #16_03
- GS 3 port controlled wooooot :)
- Lowered on Kings
- Black Evo X FMIC/ Evo IX BOV/ Depo HFC/ UR UICP
- Awesome self installed Alpine/JL Audio sound system
- Whiteline Rear Swaybar



Noli Timere Messorem

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Apr 25, 2012 9:35 pm

OK I hope I'm not interpreted to be stirring but I have some thoughts on this part.

SAM-24A wrote:However these sprays & tints are usually very easily scratched and/or damaged via light/med contact.


Not sure what you mean by this.
Are you saying these won't scratch nor get damaged on light/med contact?

It will take some serious scratching to get to the vinyl or the nightshades for the side indicators get scratched, I suspect that will be the least of your problems. The fender bar would be far more of a problem.
You can't isolate a scratch or contact just on your side indicator, it will usually be a good part of the fender.

A nightshaded side indicator won't get scratched off easily. Need an alcohol based solvent to wipe it off.

Can of Niteshades = A$12 (which will do well over 200 indicators)

And if you ever want to go back to a clear set, there's a product called Goof Off! at your local Bunnings for about A$8.

Having said that A$40 is pretty affordable for most.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors


Return to “Lighting”

Who is online

Users browsing this forum: No registered users and 12 guests