***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Engine start/stop button

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

User avatar
Alixxandar
Lancer VR/GT
Lancer VR/GT
Posts: 234
Joined: Sun Oct 09, 2011 1:01 am
Location: Bunbury, WA

Engine start/stop button

Postby Alixxandar » Mon Oct 10, 2011 1:20 pm

Does anyone know of one available for the CJ? And, if anyone has done it an installation guide would be greatly appreciated :)
Image

User avatar
whitenight
Lancer Legend
Lancer Legend
Posts: 1433
Joined: Tue Aug 24, 2010 4:16 pm
Location: QLD

Postby whitenight » Mon Oct 10, 2011 1:25 pm

ive installed the push button start but it is only for the ralliart / evo dont know about the es but i reckon you can do it .

Image

mrevo
Lancer Learner
Lancer Learner
Posts: 14
Joined: Thu Nov 18, 2010 12:11 pm
Location: Adelaide

Postby mrevo » Mon Oct 10, 2011 1:27 pm

I have one fitted to my evo.
It was an option when I brought it.
you still have to turn the ignition on before you push the start button so I hardly ever use it.
It looks good and glows red but.

Cheers Brad.
White EVO 10 MR

User avatar
Alixxandar
Lancer VR/GT
Lancer VR/GT
Posts: 234
Joined: Sun Oct 09, 2011 1:01 am
Location: Bunbury, WA

Postby Alixxandar » Mon Oct 10, 2011 1:40 pm

Thanks guys, where did you get yours from Ken?
Image

User avatar
whitenight
Lancer Legend
Lancer Legend
Posts: 1433
Joined: Tue Aug 24, 2010 4:16 pm
Location: QLD

Postby whitenight » Mon Oct 10, 2011 1:45 pm

Engine Start Button
Image
MZ360293 - Eng Start Button
RRP=A$450+
CCJ=A$425.00


ofey our cheif buyer can get this for you.

User avatar
Alixxandar
Lancer VR/GT
Lancer VR/GT
Posts: 234
Joined: Sun Oct 09, 2011 1:01 am
Location: Bunbury, WA

Postby Alixxandar » Mon Oct 10, 2011 1:47 pm

Awesome :) Was it difficult to install? Any wiring troubles?
Image

User avatar
whitenight
Lancer Legend
Lancer Legend
Posts: 1433
Joined: Tue Aug 24, 2010 4:16 pm
Location: QLD

Postby whitenight » Mon Oct 10, 2011 1:49 pm

its all plug and play so to speak . :)

comes with factory instructions

User avatar
Alixxandar
Lancer VR/GT
Lancer VR/GT
Posts: 234
Joined: Sun Oct 09, 2011 1:01 am
Location: Bunbury, WA

Postby Alixxandar » Mon Oct 10, 2011 1:51 pm

If you happen to have the panels off in the future for any reason, reckon you could post a pic on here? I'm not a fan of playing with the wiring, it can be very easy to break stuff. So if it's plug n play, or simple, then it'll be an investment for me :)
Image

User avatar
whitenight
Lancer Legend
Lancer Legend
Posts: 1433
Joined: Tue Aug 24, 2010 4:16 pm
Location: QLD

Postby whitenight » Mon Oct 10, 2011 2:01 pm

your going to have some skills and confidence to do this or get someone else to help you do this . otherwise you might have a bit of trouble.

User avatar
Alixxandar
Lancer VR/GT
Lancer VR/GT
Posts: 234
Joined: Sun Oct 09, 2011 1:01 am
Location: Bunbury, WA

Postby Alixxandar » Mon Oct 10, 2011 2:08 pm

I have the skills, no problem with that. I just haven't seen the wiring before. Last time I did a start button was on a '96 camry, and it was much easier than the CJ (I can imagine)
Image

narji
Lancer ES/EX
Lancer ES/EX
Posts: 123
Joined: Fri Jul 30, 2010 8:24 pm
Location: Australia

Postby narji » Thu Feb 16, 2012 9:49 pm

Sorry to hijack this thread after a few months.. but is anyone aware if we can add a start/stop button.. and use it without putting the key into the "On" Position.. the only reason i ask.. is i have the smart key, so i don't need to physically insert the key, so if i can get a button would be so much better than turning the plastic thing..
Not sure if people here watch 'Mighty Car Mods' but they just recently did a show on installing the start/stop button.. however all they talk about is doing the two handed start (turn the key, then press the button).. in my opinion totally defeats the purpose of the button..
Any help would be appreciated :D

User avatar
Fitter
Club Vendor
Club Vendor
Posts: 1288
Joined: Mon Mar 29, 2010 1:34 pm
Location: Brisbane

Postby Fitter » Thu Feb 16, 2012 9:58 pm

Yes it can be done. Uses the pedal instead of turning key. 200 series land cruiser prado has push button start and stop. If u push it without brake depressed....

1 push = accessories
2 push = ignition

Or with brake pushed
1 push = start car
CLUB CJ CAR AUDIO VENDOR
Owner and Builder of Australia's LOUDEST STREET LEGAL Lancer 147.5dB

2013 WORLD TITLE
2012 QLD State Champion
2008 Australian Champion

Image

User avatar
RAY CURRAN
Lancer Newbie
Lancer Newbie
Posts: 64
Joined: Wed May 05, 2010 7:29 pm
Location: brisbane

Postby RAY CURRAN » Fri Feb 17, 2012 8:58 am

i don't mind doing the turn ignition push start any ideas on cost ?

User avatar
zedd82
Lancer Evolution
Lancer Evolution
Posts: 892
Joined: Tue May 12, 2009 11:13 am
Location: Brisbane, QLD, Australia

Postby zedd82 » Fri Feb 17, 2012 9:51 am

whitenight wrote:Engine Start Button [img:6e017b803b]http://www.clubcj.net/cached_images/1318218323.jpg[/img:6e017b803b] MZ360293 - Eng Start Button RRP=A$450+ CCJ=A$425.00 ofey our cheif buyer can get this for you.


$425 if you can get it through Ofey
Club CJ's fastest and most powerful Ralliart 349.8kw/ 469hp atw 12.068s 187km/h


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 19 guests