***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

seat heater wiring and switch

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sun Sep 18, 2011 10:49 am

Another thing I've also figure out today playing with the wiring harness I got from the wreckers, The plug head which we need to feed into the seat heater under the seat is the same type and size as that used for the Rockford Forsgate Sub.

Request
So my next request is if any of you without a Rockford and won't be putting one in, could you snip off the plug head which is hanging out in the boot of your car and send it to me please? I already have one from the wiring harness set here. Need another.
Would make things much neater.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sun Sep 18, 2011 11:47 am

That is good info Ofey. I was wondering if we could get that wiring loom plug from.

What models will have the Rockford plug not being used?

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sun Sep 18, 2011 11:52 am

All Lancers. I've seen it in an ES Lancer here in Melbourne. The plug is just hanging there.

So anyone here without any desire of installing a RF Subwoofer, please snip the head off and send it to me please??
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Meaty
Lancer Evolution
Lancer Evolution
Posts: 978
Joined: Wed Nov 10, 2010 4:30 pm
Location: Melbourne Australia

Postby Meaty » Sun Sep 18, 2011 12:22 pm

before you get people to snip off the wires, are we sure there is no current running through them? dont want to bow a headset fuse or anything......
Image

User avatar
aspir3
Site Admin
Site Admin
Posts: 8415
Joined: Tue Oct 27, 2009 6:15 pm
Location: adelaide

Postby aspir3 » Sun Sep 18, 2011 12:25 pm

Yes cut each wire 1 at a time and then put some insulation tape on the end.

Also leave at least 50mm length of wires on the plug for us to connect to.

If there is any one in SA willing to give me theirs it would be appreciated too.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Sun Sep 18, 2011 12:36 pm

Meaty wrote:before you get people to snip off the wires, are we sure there is no current running through them? dont want to bow a headset fuse or anything......


Nope certainly not. The end of that wire is plugged into a blank since you don't have an amplifier.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
dubdocker
Lancer ES/EX
Lancer ES/EX
Posts: 178
Joined: Fri Jan 14, 2011 9:12 am
Location: Geelong, Victoria

Postby dubdocker » Sun Sep 18, 2011 5:49 pm

chris851 wrote:Hey Tory, not sure if this can help but has bits on the seats and wiring. really detailed. http://torrents.thepiratebay.org/420133 ... PB.torrent


I've uploaded the circuit diagrams from this onto CCJ Images.

ImageImage

ImageImage
Image

nespi13
Lancer Learner
Lancer Learner
Posts: 2
Joined: Sun Feb 10, 2013 2:24 pm
Location: rio rancho

HELP MEGA BUMP !!!!!!!!!!!!!!!!!!!

Postby nespi13 » Sun Feb 10, 2013 2:35 pm

i have a evo x mr 2012 and i dont have heated seats. i want to install them, i ordered the switch and know where it goes im just trying to find which harnesses i need to make them work thanks :)

User avatar
4B11LA
Lancer Newbie
Lancer Newbie
Posts: 24
Joined: Wed Mar 06, 2013 8:42 pm
Location: sydney, Australia

Postby 4B11LA » Sun May 04, 2014 9:08 am

I have this switch and plugs and leather seats all surplus to my needs

User avatar
belle_tb_ES
Post Monster
Post Monster
Posts: 2614
Joined: Tue May 08, 2012 11:39 am
Location: Hills District, NSW

Postby belle_tb_ES » Sun May 04, 2014 9:56 am

My 08 ES doesn't even have a spot in the fuse box for it. No wiring etc
PRESENT: 2015 Audi S3

PAST:2009 Lancer ES called Lancee...


Garage: http://clubcj.net/garage.php?mode=view_vehicle&CID=947
I

User avatar
4B11LA
Lancer Newbie
Lancer Newbie
Posts: 24
Joined: Wed Mar 06, 2013 8:42 pm
Location: sydney, Australia

Postby 4B11LA » Sat May 24, 2014 8:32 am

i still have the switch, harness from switch to vehicle harness and connectors to both seats with the earths being unpicked from earth connector for easy install sell complete only, just trying to get pic up
or pm me and i can text pic

User avatar
whitenight
Lancer Legend
Lancer Legend
Posts: 1433
Joined: Tue Aug 24, 2010 4:16 pm
Location: QLD

Postby whitenight » Sat May 24, 2014 12:12 pm

Pm'd

age69er43
Lancer Newbie
Lancer Newbie
Posts: 31
Joined: Thu Apr 15, 2010 5:04 pm
Location: Torquay, Victoria , Australia

Postby age69er43 » Tue Jan 26, 2016 12:14 am

Anyone had any luck hooking it up



just wondering if you had trouble connecting it up?
I've put a relay in and there is a fuse already there, connected the connections under the seats put the wire loom in under the cup holder to the switch and nothing. Relay is warm, the switch lights up with headlights on but that's it, could anyone help me? Cheers really appreciate it[img]Image%20Location[/img]


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 12 guests