***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Interior Neons & Center Console Wires

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

User avatar
ash06
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 396
Joined: Sun Dec 28, 2008 3:47 pm
Location: Sydney, NSW, Australia

Interior Neons & Center Console Wires

Postby ash06 » Wed Jan 21, 2009 7:05 pm

hey,

does anyone know what these wires under here are for?

Image


I am looking at wiring interior neons (x2) in my car, and am looking for a power source... any help would be apprciated :)

any ideas on how i can wire them up so they only come on when the doors open? :S


thanks,
ash

Dummer

Postby Dummer » Wed Jan 21, 2009 8:37 pm

Those are for heated seats on overseas models I think i read before....

Yup mine are wired to the door activation. Behind the glovebox there is a harness with a yellow wire that is a switched ground. From that plug you can also get the 12V constant supply you'll need....

This weekend I'll get some pics and more info for you....

User avatar
Ozie
INACTIVE Member Account
Posts: 5445
Joined: Mon Sep 22, 2008 7:00 am
Location: Sydney, NSW, Australia

Postby Ozie » Thu Jan 22, 2009 1:14 am

yes ryan is correct.

User avatar
Bobcat_GTS
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 313
Joined: Sat Oct 11, 2008 6:25 pm
Location: Springfield, Illinois, USA
Contact:

Postby Bobcat_GTS » Thu Jan 22, 2009 6:59 am

My car doesn't have them, but we didn't get heated seats as an option here in the U.S., just Canada as far as I know. That bites too, because it's been below zero here a few times lately, but it's actually above freezing today, for a change.

User avatar
ash06
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 396
Joined: Sun Dec 28, 2008 3:47 pm
Location: Sydney, NSW, Australia

Postby ash06 » Thu Jan 22, 2009 11:05 am

Ryan_C wrote:Those are for heated seats on overseas models I think i read before....

Yup mine are wired to the door activation. Behind the glovebox there is a harness with a yellow wire that is a switched ground. From that plug you can also get the 12V constant supply you'll need....

This weekend I'll get some pics and more info for you....



hey mate, thanks or the info and the quick response!
ah man, any help there would be appreciated, especially since you have done it already



:D

User avatar
s21197
Lancer ES/EX
Lancer ES/EX
Posts: 144
Joined: Mon Dec 15, 2008 6:43 am
Location: Surrey, BC, Canada

Postby s21197 » Thu Jan 22, 2009 11:12 am

I've got heated seats but not those wires

User avatar
Ozie
INACTIVE Member Account
Posts: 5445
Joined: Mon Sep 22, 2008 7:00 am
Location: Sydney, NSW, Australia

Postby Ozie » Thu Jan 22, 2009 12:35 pm

were are your heater controls for the seats? near the centre console?
that wiring sits in there as spares.

User avatar
s21197
Lancer ES/EX
Lancer ES/EX
Posts: 144
Joined: Mon Dec 15, 2008 6:43 am
Location: Surrey, BC, Canada

Postby s21197 » Thu Feb 12, 2009 4:33 pm

the switches are for the drivers and passenger seats only. The switches are in front of the centre console pocket thing. From the pics that I have seen, it looks like u guys just have a flat piece of plastic. Seems some of u are resting ur ipods on that area

User avatar
s21197
Lancer ES/EX
Lancer ES/EX
Posts: 144
Joined: Mon Dec 15, 2008 6:43 am
Location: Surrey, BC, Canada

Postby s21197 » Thu Feb 12, 2009 4:35 pm

to bobcat... trust me bro we need those seats up here :). The day that we get a day in winter that's above zero, ill start believing in global warming cause thats just never happened haha

User avatar
Micoa
Lancer ES/EX
Lancer ES/EX
Posts: 132
Joined: Fri Dec 12, 2008 4:09 pm
Location: Adelaide, SA, Australia

Postby Micoa » Thu Feb 12, 2009 8:32 pm

to Ryan_C could you post up instructions on how to wire the neons to the car door?

cheers

Dummer

Postby Dummer » Fri Feb 13, 2009 11:35 am

Micoa wrote:to Ryan_C could you post up instructions on how to wire the neons to the car door?

cheers


There has been instructions in the How To section now for a couple of weeks....

Pimpinfern
INACTIVE Member Account
Posts: 16
Joined: Tue Nov 04, 2008 1:50 pm
Location: Orlando, FL, USA

Postby Pimpinfern » Sun Feb 15, 2009 12:59 pm

wire them to the dome/ map lights, then they will come on with the doors

User avatar
Micoa
Lancer ES/EX
Lancer ES/EX
Posts: 132
Joined: Fri Dec 12, 2008 4:09 pm
Location: Adelaide, SA, Australia

Postby Micoa » Sun Feb 15, 2009 1:15 pm

sorry ryan_c

i thought someone else wrote that How To

sorry for my mistake


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 7 guests