***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

DVD Map based MMCS A01-A04 - The Definitive Guide for CCJ

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

DVD Map based MMCS A01-A04 - The Definitive Guide for CCJ

Postby ofey » Mon Jul 26, 2010 4:39 pm

Introduction (Last update 140315)
I will be updating this as I go along so check back often.
This thread will act as a one stop link on our site for the MMCS.
Further down in this thread you will find information of the Easter Eggs of our MMCS.

Model Revisions and Maps
Since the release of the CJ in 2007, Mitsubishi Motors have installed 4 different units in their vehicles. These range from A01, A02 , A03 and A04 which is the last of the current revision.

Since 2012, MMAL have changed the MMCS installed in our car to a new non map-disc based system.

The best way to tell the difference is:

1st Gen:
Image

NOTE
Although looking similar, the US and UK MMCS versions are not recommended for use in Australia.
These are Hard Disk based systems and though hackable, there are NO known maps available for Australia which kind of defeats the purpose of a MMCS.

The difference aesthetically is the presence of a knob dial on the bottom right of the fascia as shown:

Image


2nd Gen
Since MY12, MMAL have distributed a new Gen 2 MMCS system:
Image

This thread is dedicated to the 1st Gen MMCS and does NOT provide any information for the new system locally.

If you want more information, refer here.

update for 2nd Gen MMCS:
Apparently the maps are supplied by Navteq (by Garmin). And there's free upgrades for 3 yrs from when you buy the car. Information here.

The maps which have been used in these are Disc based and supplied by: Whereis maps. Here they are:

Ver.14 - 2007
Ver.15 (MZ360297EX) - 2008
Ver.16 - 2009 (Megaupload Link available. PM for more details. Only available to premium members)
Ver.17 - 2010 (released Mar 2011)
Ver.18 - 2011 (released Mar 2012) -> Includes ROM based firmware upgrade
Ver.19 - There was no Ver.19 by MMAL. Tested the Ver. 19 Map Disc produced by Subaru for their system which works in our MMCS.
Ver.20 - Released 4 Apr 2014 by Whereis. Group buy successfully carried out.

Other MMCS Threads:
MMCS Owners
how to - sink MMCS flush with the dash


Service Modes
Also known as Easter Eggs. Here are some listings of how you can engage them and some useful changes you may make to them.

1. MMCS Service Modes

Service Mode 1:
To vary the settings of the MMCS Unit i.e. To access the MMCS service menu

a. Prior to starting, PLEASE check your Navigation DVD is inserted
b. Turn ignition on, press agree.
c. Press Audio then PWR - should be at the Audio Off screen, no keys displayed. Shown below:
Image

d. There are 4 hidden keys on this screen as shown below:
Image

Press 4 then 2 then 4 then 2 then 4 then 2

e. You'll now get this:
Image
The next menu is:
Image

Service Mode 2:
To access the MMCS service menu
1. Prior to starting, PLEASE check your Navigation DVD is inserted
2. Turn ignition on, press agree.
3. Press Audio then PWR - should be at the Audio Off screen, no keys displayed. Shown below:
Image

4. There are 4 hidden keys on this screen as shown below:
Image
......1
4.........2
......3

Press 1 then 3 then 2 then 3 then 1 then 3 then 4 then 2 (13131342)

Menu Page 1:
Image
Page 2:
Image
Page 3:
Image
Page 4:
Image

2. ETACS Variations

3. Ejecting Map DVD
In the unlikely case that you MMCS "hangs" and none of the buttons are clickable

a) Click Tilt
b) Once the screen tilts, click the screen on the top right hand corner.
Map DVD should now eject... .


FAQ
1. Ques: Where is the Speed Sensor Wire?
Aspired wrote:Can't you just connect an inline switch on the MMCS speed sensor wire so that when it is pushed in the signal is cut to the MMCS and it thinks the car is not moving so all your functions will be available, then after you have finished making your changes push the switch again to re establish the wires connection to the MMCS.

The speed sensor wire into the MMCS is in the top 20 pin molex connector and is the white wire with a blue stripe on the top right hand side of the plug.

Image Image


2. Ques: I want to be able to watch my DVD whilst driving, what can I do?
There's still no hack for it. There are now two aftermarket solutions:

The preferred option on this forum is available through JDM Parts.

The other which is available here in Australia is from this place.
ofey wrote:By listing a link, we are by no means endorsing him but providing the necessary information.


Dissecting the MMCS
As many of you might know I recently acquired a faulty MMCS system from SPIKE. He was very generous in offering me the faulty set FOC which I have now taken apart to fix.

I have to courses of action:

a) Simply fix the screen then sell it again. *PREFERRED*
OR
b) Fix the screen and use it to reverse engineer a solution whereby I can offer some kind of FIRMWARE or HARDWARE fix to our Media play during motion. *NOT PREFERRED as Too much work for too little gain*

Why this Thread?
I've always thought it'd be good to add to the knowledge base of what we know about our cars and this adds to the already abundant set of knowledge available on forums about this unit.

Here are an excerpt of some of them:

Internet Information Links
Pajero 4WD Club of Victoria
1. MMCS
2. MMCS Speed Override & iPod Cables!
3. MMCS Video Out
4. Bluetooth Motion detection - VERY LONG and FULL of info
5. Dissecting the Aussie MMCS
6. SATNAV map v16 - No Torrent Link yet. So don't waste your time looking

Eclipse AVN6000 Profile
What seems to be our model... .

Images - Enjoy the pictures!
Sorry I was lazy and didn't take the initial disassembly pics. I only started pics once it got abit more complicated:

1. Cracked Screen
Image

2.Rear of Cracked Screen
Image

3. Rear of LCD Panel with board out of the way
Image

4.Cracked Screen shown separated.
Image

As I mentioned earlier, I will be adding to this thread as I go along. :wink:
Last edited by ofey on Tue Apr 08, 2014 12:25 pm, edited 22 times in total.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel
Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust
BC BR-type Coilovers | UR + Whiteline Bars
EBC GreenStuff Pads | RDA Rotors

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Jul 28, 2010 11:39 am

MMCS Owners Listing:

VIC
1. ofey*
2. whitemonster*
3. Aspired^
4. tin_pusher*
5. hansmitchel
6. Platinum Sarah*
7. Rabbit
8. Captain
9. PMR
10. SPIKE
11. edraven
12.

NSW
1. Hoggy
2. SAM-24A
3. JaCe
4. Chubb
5. vr
6. Spareparts
7. kayman
8. fawad
9. Blackjack
10. Milli
11.

QLD
1. mechenggdude
2. Frazza*
3. Arutha^
4. 8Ball
5. Andy85
6.


WA
1. Graham*
2. LegendaryPhoenix
3.

SA
1. Tenjho
2. aspir3
3. Blackbetty
4.

TAS
1. Ralliartas
2.

Overseas
1. rush74 (Germany)
Last edited by ofey on Thu Nov 11, 2010 9:24 pm, edited 1 time in total.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Wed Jul 28, 2010 11:40 am

To Install Reverse Parking Camera:

2 things we establish:
1. You have a MMCS.
2. There is NO wiring harness in the boot for the camera. You need to wire your own harness from the MMCS to wherever in the boot you want to place it.

To install a reverse parking camera, you have 2 choices:
1. Go to your dealer and ask for it to be installed. It's a 2.5hr job so @A$85/hr, they chould charge you up to A$255 for the install. And I think they charge you A$380 for the parts.

OR
2. Like many of us here, we DIY to save on costs. Here is the link to show you where we mount the camera:

Image

Here are the parts necessary and the price:

MZ380462EX MMCS Reversing Camera
RRP=A$228+
CCJ Price =A$223

MZ607437EX MMCS Reversing Camera Cover
RRP=A$25.8+
CCJ Price = A$25

MZ360277EX MMCS Reversing Camera Harness
RRP=A$41.40+
CCJ Price =A$42

To install, you must access the back of your MMCS. To do that, here is a step by step instruction to get to the back of the MMCS. Once you've plugged in the camera wires, you run the camera wire along the passenger side trim under the foot scuff plate, to the boot. Once there, if you take out the trimmings in the boot, you can poke the wiring through a rear grommet under the pax side tail lamp to get out to the back and then it's just simple arrangement.

Your iPod cable is:
MZ360221EX MMCS iPod Cable
CCJ Price=A$135

Hope this clears this up for you.
Last edited by ofey on Tue Aug 17, 2010 5:52 pm, edited 1 time in total.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

winrf
INACTIVE Member Account
Posts: 6
Joined: Thu Aug 05, 2010 9:47 pm
Location: Melbourne

Postby winrf » Thu Aug 05, 2010 10:22 pm

Hi, just reading your information in getting access to the service menu, what and where do I get the pre-check DVD from you metioned needs to be inserted?

I am in vic also.

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Aug 05, 2010 11:05 pm

winf: Precheck DVD? Where did I say that? You just need your Navigation DVD in. Any version is fine.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
tadz0rz
Genius
Genius
Posts: 6955
Joined: Sun Mar 08, 2009 8:54 pm
Location: Melbourne, VIC, Australia
Contact:

Postby tadz0rz » Thu Aug 05, 2010 11:11 pm

I think he means more towards the top where you have said "Pre-Check Nav CD" in Service Mode 1
Got a question? Read the ClubCJ Ultimate Guide First!!
Image
Just...Dont worry about it ;)Dont Click Me

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Thu Aug 05, 2010 11:15 pm

OK to make it clearer then:

Prior to starting, PLEASE check your Navigation DVD is inserted
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
JaCe
Alumni
Alumni
Posts: 1819
Joined: Thu Jun 04, 2009 7:17 am
Location: Sydney, AU

Postby JaCe » Thu Aug 05, 2010 11:33 pm

I'm still waiting for a new MMCS from Japan but thanks for the guide!
Image

"A man who stands for nothing, falls for anything."

winrf
INACTIVE Member Account
Posts: 6
Joined: Thu Aug 05, 2010 9:47 pm
Location: Melbourne

Postby winrf » Fri Aug 06, 2010 7:09 pm

Guys, yep I did mean at the area of service menu 1 and thanks for clearing this up. guys great information thanks.

User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Postby Blakey » Tue Aug 17, 2010 11:04 am

does anyone have a some picture of that overide kit. addon thing.
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Tue Aug 17, 2010 11:20 am

Nope. Even on the guy's site, he only tells you that he has a box that will do it but no one shows it. It's just a simple black box with wires on either end.

Adrian claimed he was working on a Reverse Engineered version but he was cut down before he could finish.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Postby Blakey » Tue Aug 17, 2010 2:11 pm

how was he cut down? its proably just a box with a resistor in it lol. like thoes Ebay power piggyback ecu's if any one has a picture of one send it to me( inside of one. not just the box of it)
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM

User avatar
ofey
Alumni
Alumni
Posts: 8582
Joined: Mon Oct 27, 2008 8:56 pm
Location: Melbourne, VIC, Australia
Contact:

Postby ofey » Tue Aug 17, 2010 4:21 pm

After the Adrian case. I'm sure we don't need to bring it to the surface again. So if you pm Adrian some other way, ask him how much progress he has made on the MMCS override?

Yeah we all know it's a simple 555 timer and some circuit to generate the pulse but knowing and doing are 2 very different things.
Beeble tooned MY08 OEd. w/ RA BKit+SWheel

Cosworth Panel Filter w/ RA Intake | SuperCircuit 4-2-1 Headers | Creat’d Ti-tipped SS exhaust

BC BR-type Coilovers | UR + Whiteline Bars

EBC GreenStuff Pads | RDA Rotors

User avatar
Blakey
Lancer MASTER
Lancer MASTER
Posts: 2282
Joined: Wed Sep 16, 2009 7:53 pm
Location: Brisbane

Postby Blakey » Tue Aug 17, 2010 6:43 pm

ofey wrote:After the Adrian case. I'm sure we don't need to bring it to the surface again. So if you pm Adrian some other way, ask him how much progress he has made on the MMCS override?

Yeah we all know it's a simple 555 timer and some circuit to generate the pulse but knowing and doing are 2 very different things.


well i have a hobby of electronic circuits and i wasn't gonna try it unless i thought i can reproduce it. but if its what you say, the electronics side of it seems quite simple.
IF YOUR NOT LIVING ON THE EDGE YOUR TAKING UP TOO MUCH ROOM

User avatar
Graham
Post Monster
Post Monster
Posts: 3021
Joined: Mon May 18, 2009 6:08 pm
Location: Perth

Postby Graham » Tue Aug 17, 2010 6:56 pm

that second hidden menu looks exciting, I tried to get to it once before but it wouldn't open, I'll try it again soon
Four wheels move the body, two wheels move the soul.
ImageImage
Daily Driver: Yamaha R1
Weekend Warrior: BMW Z4 Roadster


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 21 guests