***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Q. about ecu chips..

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

User avatar
Bobcat_GTS
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 313
Joined: Sat Oct 11, 2008 6:25 pm
Location: Springfield, Illinois, USA
Contact:

Postby Bobcat_GTS » Sun Jan 25, 2009 2:37 am

Ryan_C wrote:I've rung MRT and Castle Hill Exhaust in sydney and both say they cant tune the ECU in the NA CJ Lancers. So the only alternative they reckon is a piggyback, such as a haltech Interceptor.

I'm going to go to MCA dyno day and hopefully when its on the dyno they can check out the ECU and see if it can be reflashed and how the fuel mapping in it is....


There is a company in Californis called Works that can reflash the ECU.

User avatar
Vmo91
INACTIVE Member Account
Posts: 102
Joined: Fri Dec 05, 2008 12:22 pm
Location: Las Vegas, NV, USA

Postby Vmo91 » Sun Jan 25, 2009 4:29 am

Peanut wrote:I am getting the RRM piggy back once i get it and tune it a bit ill let you know how it goes


the Piggy back ecu will void your warranty cause you have to split wires

User avatar
Peanut
Lancer Ralliart
Lancer Ralliart
Posts: 691
Joined: Sun Nov 30, 2008 10:55 am
Location: The Shire, NSW, Australia

Postby Peanut » Sun Jan 25, 2009 8:13 am

That cool not to concerned about that cause i am a mechanic so short of the engine blowing up it should be sweet lol
Look Out! in The Shire!!
Image
The Can Crusher, Tuckin' Rubber, Pancake Flat. - CCJ Premium Member #0022

bobcrusader wrote:
Blake, you must be a member of the fun police? Do you know my wife?

User avatar
Vmo91
INACTIVE Member Account
Posts: 102
Joined: Fri Dec 05, 2008 12:22 pm
Location: Las Vegas, NV, USA

Postby Vmo91 » Sun Jan 25, 2009 8:45 am

ha i get you bro, i'd do it all, but i'm kinda slow with car parts, and way short of money ha

User avatar
Peanut
Lancer Ralliart
Lancer Ralliart
Posts: 691
Joined: Sun Nov 30, 2008 10:55 am
Location: The Shire, NSW, Australia

Postby Peanut » Sun Jan 25, 2009 8:47 am

Yeah being able to do all instillations myself and getting things cheaper in Aus helps lol
Look Out! in The Shire!!

Image

The Can Crusher, Tuckin' Rubber, Pancake Flat. - CCJ Premium Member #0022



bobcrusader wrote:

Blake, you must be a member of the fun police? Do you know my wife?

Dummer

Postby Dummer » Sun Jan 25, 2009 9:32 pm

Bobcat_GTS wrote:
Ryan_C wrote:I've rung MRT and Castle Hill Exhaust in sydney and both say they cant tune the ECU in the NA CJ Lancers. So the only alternative they reckon is a piggyback, such as a haltech Interceptor.

I'm going to go to MCA dyno day and hopefully when its on the dyno they can check out the ECU and see if it can be reflashed and how the fuel mapping in it is....


There is a company in Californis called Works that can reflash the ECU.


The works and RRM chips are rip offs... I want a dyno tune that is custom done to my car as this will get the most out of my car. But yeah at this stage I think I'll be getting a Haltech Interceptor...

Not too mention my RRM extractors fucked up within two weeks and they dont seem to give a rats ass about it! There stuff is crap quality and yeah I wont be buyin off them....

User avatar
Peanut
Lancer Ralliart
Lancer Ralliart
Posts: 691
Joined: Sun Nov 30, 2008 10:55 am
Location: The Shire, NSW, Australia

Postby Peanut » Sun Jan 25, 2009 9:41 pm

Well ill see about the RRM piggy back and as for personal tune will be hard to do cause Open ECU hasnt developed it for the CJ Lancer yet just the Evo X
Look Out! in The Shire!!

Image

The Can Crusher, Tuckin' Rubber, Pancake Flat. - CCJ Premium Member #0022



bobcrusader wrote:

Blake, you must be a member of the fun police? Do you know my wife?

Dummer

Postby Dummer » Mon Jan 26, 2009 12:32 pm

Peanut wrote:Well ill see about the RRM piggy back and as for personal tune will be hard to do cause Open ECU hasnt developed it for the CJ Lancer yet just the Evo X


Hence why I am looking at the Haltech interceptor...

User avatar
Peanut
Lancer Ralliart
Lancer Ralliart
Posts: 691
Joined: Sun Nov 30, 2008 10:55 am
Location: The Shire, NSW, Australia

Postby Peanut » Tue Jan 27, 2009 6:30 pm

Peanut wrote:
Well ill see about the RRM piggy back and as for personal tune will be hard to do cause Open ECU hasnt developed it for the CJ Lancer yet just the Evo X


Hence why I am looking at the Haltech interceptor...


When you get it could you let us all know how it pans out
Look Out! in The Shire!!

Image

The Can Crusher, Tuckin' Rubber, Pancake Flat. - CCJ Premium Member #0022



bobcrusader wrote:

Blake, you must be a member of the fun police? Do you know my wife?

Dummer

Postby Dummer » Thu Jan 29, 2009 10:08 pm

We'll see how I go, wont be doing it until after May (or whenever I get my full license)....

If I get a cop who knows what they are doing and they find the Haltech Interceptor I'll no doubt lose my license as P plater's arent allowed engine mods in NSW (the zorst and pod i could prolly talk my way out of :lol:).

Going to the MCA Dyno Day mid feb and going to talk to the guy their who is rumoured to be a whiz when it comes to tuning Mitsu motors and yeah we'll see what he has to say :D I'd need to see some decent gains in performance and fuel economy to justify forking out $1500 for it...

Although doing some quick maths if it can save me 1-2L\100km off my fuel economy then yeah it'll pay for itself in saved fuel, especially if petrol sky rockets again (which I forsee happening within a few years)...

User avatar
Mitsiman
Lancer Ralliart
Lancer Ralliart
Posts: 522
Joined: Fri Oct 24, 2008 11:16 am
Location: Perth, WA, Australia
Contact:

Postby Mitsiman » Tue May 05, 2009 1:07 pm

For those wanting updated news on this, RPW is now doing ecuflashing of the EVO X and we are also now ready to work on the CJ Lancer.

I already have some base map defnitions, but I am fairly certain that we can with a little work start on reflashing these.

Once this is done we can provide some mail order flashes with basic tuning and of course, full custom tuning at our shop for perth customers.

We are already doing EVO X models now with good results
For urgent replies to PM's contact via phone

dumb&

Postby dumb& » Tue May 05, 2009 1:10 pm

Can you give us a rough idea on what sort of price we'd be looking at?

User avatar
Mitsiman
Lancer Ralliart
Lancer Ralliart
Posts: 522
Joined: Fri Oct 24, 2008 11:16 am
Location: Perth, WA, Australia
Contact:

Postby Mitsiman » Tue May 05, 2009 1:18 pm

we charge $600.00 for a retune on our dyno, mail order flashes will be around $100.00 plus freight
For urgent replies to PM's contact via phone

dumb&

Postby dumb& » Tue May 05, 2009 1:36 pm

That is pretty reasonable for a mail order flash. Cheers :)


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 43 guests