Re: 07 to 09 lancer trims with security alarms
Posted: Wed Mar 30, 2022 9:40 pm
workshop/SEARCH/2008/index_M1.htm
We have the connector C-317 go to the link above then CONFIGURATION DIAGRAMS --> DASH PANEL and it is in the same location
The plug that connects to the hazard panel is C-18 (16 pin plug) and it is pins 15 & 12 that connect to the alarm indicator light
Connector C-317 is on the fuse panel and is the larger plug at the top left (15 pin plug) These pins are 2 & 9 that connect to pins 15 and 12 of connector C-18.
It does mention that the wire from pin 2 goes through a connector (C-07) but in our manual it says that C-07 is the receiver antenna module and only has 12 pins whereas the OS manual says it's a 24 pin joint connector this could just be an error as our manual says C-02 C-03 and C-04 are the joint connectors.
So from what i can read. The circuit goes: Battery --> Relay 30 --> ETACS ECU Via connector C-307 --> Fuse 9 (15A) (radio fuse i believe) --> out via connector C317 (pins 2 & 9) --> through joint connector (in pin 11 out pin 10 ???) (for pin 2 only) --> in via connector C-18 (pins 15 & 12).
P.S. I am in no way an expert, and it is difficult to translate images into text. and unfortunately i cannot attach photos here at the moment. I will get a chance to look at my ETACS unit on the weekend.
We have the connector C-317 go to the link above then CONFIGURATION DIAGRAMS --> DASH PANEL and it is in the same location
The plug that connects to the hazard panel is C-18 (16 pin plug) and it is pins 15 & 12 that connect to the alarm indicator light
Connector C-317 is on the fuse panel and is the larger plug at the top left (15 pin plug) These pins are 2 & 9 that connect to pins 15 and 12 of connector C-18.
It does mention that the wire from pin 2 goes through a connector (C-07) but in our manual it says that C-07 is the receiver antenna module and only has 12 pins whereas the OS manual says it's a 24 pin joint connector this could just be an error as our manual says C-02 C-03 and C-04 are the joint connectors.
So from what i can read. The circuit goes: Battery --> Relay 30 --> ETACS ECU Via connector C-307 --> Fuse 9 (15A) (radio fuse i believe) --> out via connector C317 (pins 2 & 9) --> through joint connector (in pin 11 out pin 10 ???) (for pin 2 only) --> in via connector C-18 (pins 15 & 12).
P.S. I am in no way an expert, and it is difficult to translate images into text. and unfortunately i cannot attach photos here at the moment. I will get a chance to look at my ETACS unit on the weekend.