***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

Fuse taps and dash cameras

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

lxlancer2014
Lancer Learner
Lancer Learner
Posts: 7
Joined: Wed Sep 06, 2017 11:16 am

Fuse taps and dash cameras

Postby lxlancer2014 » Sun Sep 10, 2017 12:46 pm

So I puchased a dash cam fuse tap and a dash cam. This is the fuse tap kit http://www.ebay.com.au/itm/Original-Das ... 2749.l2649. The dash cam I have requires 5 volts and 1 amp. I noticed that the tap kit converts 12v to 5v at 1.5 amp. If I hook up the dash cam will it be recieving to much amperage or will it only draw the one amp and the other 500ma doesnt get used?

Thanks.
2014 Lancer LX 2.0 CVT
>Stock as a rock

User avatar
Lancer1993
Genius
Genius
Posts: 5342
Joined: Sat Dec 06, 2014 12:46 pm
Location: Caloundra
Contact:

Re: Fuse taps and dash cameras

Postby Lancer1993 » Sun Sep 10, 2017 1:06 pm

I bought something similar on eBay, still waiting for mine. Only difference is mine are full size USB female as my DC has GPS on the power lead so I need to plug in the other end that normally goes into a USB socket.
Image
My rides CJ VRX - CC coupe

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Fuse taps and dash cameras

Postby bumblebee » Sun Sep 10, 2017 2:45 pm

lxlancer2014 wrote:So I puchased a dash cam fuse tap and a dash cam. This is the fuse tap kit http://www.ebay.com.au/itm/Original-Das ... 2749.l2649. The dash cam I have requires 5 volts and 1 amp. I noticed that the tap kit converts 12v to 5v at 1.5 amp. If I hook up the dash cam will it be recieving to much amperage or will it only draw the one amp and the other 500ma doesnt get used?

Thanks.



Correct
Doesnt matter the amperage is too high
If the convertor shoved out 12 amps and your device needs 1amp then there is 11amps left that can draw on it.so long as it puts out the correct voltage then your right as rain.

lxlancer2014
Lancer Learner
Lancer Learner
Posts: 7
Joined: Wed Sep 06, 2017 11:16 am

Re: Fuse taps and dash cameras

Postby lxlancer2014 » Sun Sep 10, 2017 2:58 pm

Thanks bublebee. Just hooked it up then and its working fine.
2014 Lancer LX 2.0 CVT
>Stock as a rock

User avatar
bumblebee
Post Monster
Post Monster
Posts: 3059
Joined: Mon Jun 12, 2017 7:22 pm
Location: Australia

Re: Fuse taps and dash cameras

Postby bumblebee » Sun Sep 10, 2017 3:28 pm

All good robin hood
Here to help


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 37 guests