***** ALERT - Nominations for your new ClubCJ Committee can be made here *****

New Greddy 7 in 1 62mm Gauge

Alarms, Smart Key, Batteries, Wiring, Engine/Computer Management & Racing Chips.

Moderators: Moderators, Senior Moderators

Hbomb931
Lancer Newbie
Lancer Newbie
Posts: 94
Joined: Tue Feb 11, 2014 9:45 pm
Location: Perth, Australia

New Greddy 7 in 1 62mm Gauge

Postby Hbomb931 » Fri Mar 28, 2014 6:02 pm

Hey guys,

I have recently stumbled across a 62mm Greddy 7 in 1 Gauge and was wondering what everyone's thoughts were..

Basically the outer edge is an analogue boost gauge and the 2 inner digital displays cycle through 7 different sensor readings varying from pressure to temperature. They can be programed to show whatever you want and you can fully customise the colours and everything else you can think of.

they are a little pricy from what I understand but I think it makes up for the overall cost of buying multiple gauges and then getting separate wiring harnesses/sensors..

the link is attached below, have a look and see what you think

http://www.greddy.com/products/electronics/multi-da/
Ben H

perth, WA

2014 Mitsubishi Ralliart

Mods:-

3" Cat back exhaust system with UR pipes
Turbo smart BOV (recirculation)
HKS spark plugs
K&N Air Filter
Tune (198kw and 415nm at the hubs)

Image

Hbomb931
Lancer Newbie
Lancer Newbie
Posts: 94
Joined: Tue Feb 11, 2014 9:45 pm
Location: Perth, Australia

Postby Hbomb931 » Fri Mar 28, 2014 6:14 pm

the Gauge displays:-

Boost
Water temp
oil temp
exhaust gas temp
oil pressure
fuel pressure
Voltage

The boost gauge is the analogue bit and you can have 2 other sensor readings being displayed at the same time.
Ben H



perth, WA



2014 Mitsubishi Ralliart



Mods:-



3" Cat back exhaust system with UR pipes

Turbo smart BOV (recirculation)

HKS spark plugs

K&N Air Filter

Tune (198kw and 415nm at the hubs)



Image

ZeroNanite
Lancer Learner
Lancer Learner
Posts: 4
Joined: Mon Jan 16, 2012 6:25 pm
Location: Liberty, Tx, United States

Postby ZeroNanite » Thu May 22, 2014 3:59 pm

Depends on price. IMO if I were to go for a multifunction gauge, it would be a screen display. Something like some of the in car tuners have/ GT-R/ Autometer LCD Race Dash

User avatar
chukatsung
Lancer VR/GT
Lancer VR/GT
Posts: 204
Joined: Mon Oct 15, 2012 9:06 am
Location: Sydney, AU

Postby chukatsung » Thu May 22, 2014 4:45 pm

I am happy with my Depo gauge from ebay.

https://www.facebook.com/deporacingtw/p ... =3&theater

Pretty decent for the price =]
I make vinyl stickers!
PM me for details
Or Click here to visit my Facebook page

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Thu May 22, 2014 5:24 pm

I went for the Prosport Evo series (http://prosportgauges.com/wideband-air- ... -Blue.aspx) If you don't have the room far enough.
Image

[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]

User avatar
black_ice
Lancer VRX/GTS
Lancer VRX/GTS
Posts: 365
Joined: Sun Feb 24, 2013 4:13 pm
Location: NSW

Postby black_ice » Thu May 22, 2014 10:24 pm

I have seen this gauge in a car and I think it looks sexy as! But from what the mechanic told me it's about $700-$800 for the gauge...if I had that budget wouldn't think twice...also looks like very high quality from what I saw...
Saying a car is for going form A to B is like saying sex is for reproduction!

User avatar
Speedie
Lancer MASTER
Lancer MASTER
Posts: 1751
Joined: Thu Mar 05, 2009 11:42 pm
Location: Brisbane, QLD, Australia

Postby Speedie » Thu May 22, 2014 10:36 pm

But the Blitz Brain is around that price too. http://www.nengun.com/blitz/touch-brain
Or the I-Color
http://www.nengun.com/blitz/r-vit-i-color-flash-ver-41
Image



[Evo X Brembos] [Evo X Intercooler] [Evo X UICP]


Return to “Electrical”

Who is online

Users browsing this forum: No registered users and 6 guests